1. Simulating squeeze flows in multiaxial laminates: towards fully 3D mixed formulations

   • Rubén Ibáñez
   • Emmanuelle Abisset-Chavanne
   • Antonio Huerta

   Original Research 12 July 2016 Pages: 653 - 669

   

2. Study of the cohesion of carbon fiber yarns: in-plane shear behavior

   • A. Wendling-Hivet
   • M. Ramón Ferré
   • G. Hivet

   Original Research 22 July 2016 Pages: 671 - 683

   

3. Inverse analysis procedure to determine flow stress and friction data for finite element modeling of machining

   • Rodolfo Franchi
   • Antonio Del Prete
   • Domenico Umbrello

   Original Research 28 July 2016 Pages: 685 - 695

   

4. High strain rate embossing with copper plate

   • Huimin Wang
   • Anupam Vivek
   • Glenn Daehn

   Original Research 11 August 2016 Pages: 697 - 705

   

5. On the benefits of a stress criterion for the simulation of cup drawing process

   • Yann Jansen
   • Roland E. Logé
   • Marc Milesi

   Original Research 25 August 2016 Pages: 707 - 716

   

6. Numerical study of contact conditions in press hardening for tool wear simulation

   • Liang Deng
   • Sergej Mozgovoy
   • Mats Oldenburg

   Original Research Open access 14 September 2016 Pages: 717 - 727

   

7. Thermal modeling in electricity assisted incremental sheet forming

   • Junying Min
   • Patrick Seim
   • Bernd Kuhlenkötter

   Original Research 10 September 2016 Pages: 729 - 739

   

8. Formability enhancement of Al 6060 sheets through fiber laser heat treatment

   • S. Zarini
   • E. Mostaed
   • B. Previtali

   Original Research 10 November 2016 Pages: 741 - 751

   

9. Influences of temperature and grain size on the material deformability in microforming process

   • Zhengyi Jiang
   • Jingwei Zhao
   • Di Wu

   Original Research 17 September 2016 Pages: 753 - 764

   

10. Free-stretch-blow investigation of poly(ethylene terephthalate) over a large process window

    • James Nixon
    • G. H. Menary
    • S. Yan

    Original Research Open access 26 September 2016 Pages: 765 - 777

    

11. About the origins of residual stresses in in situ consolidated thermoplastic composite rings

    • Cyril Dedieu
    • Anaïs Barasinski
    • Jean-Marc Dupillier

    Original Research 27 September 2016 Pages: 779 - 792

    

12. Finite element simulations of stretch-blow moulding with experimental validation over a broad process window

    • J. Nixon
    • G. H. Menary
    • S. Yan

    Original Research Open access 25 October 2016 Pages: 793 - 809

    

13. Numerical shape optimization of cold forging tools by means of FEM/BEM simulation

    • F. Klocke
    • O. Ozhoga-Maslovskaja
    • D. Trauth

    Original Research 04 October 2016 Pages: 811 - 821

    

14. Bore-expanding test for thermosetting carbon-fiber-reinforced plastic sheets

    • Yu Uriya
    • Jun Yanagimoto

    Original Research 27 October 2016 Pages: 823 - 829

    

15. A fracture locus for a 50 volume-percent Al/SiC metal matrix composite at high temperature

    • Sergey Smirnov
    • Dmitry Vichuzhanin
    • Anatoly Konovalov

    Original Research 18 October 2016 Pages: 831 - 843