Articles

1. A Study of the Properties of Mineral, Chemical, and Vegetable Fibers

   • P. A. Medvedev
   • A. N. Blaznov
   • V. V. Firsov

   OriginalPaper 24 December 2023 Pages: 1034 - 1037

2. Influence of Machining Modes and Negative Temperature on the Static Bending Strength of Carbon Fiber Reinforced Plastics

   • I. S. Bolotnikov
   • E. A. Kosenko
   • P. E. Demin

   OriginalPaper 24 December 2023 Pages: 1028 - 1033

   

3. Prediction of Electrophysical Properties of Organic-Inorganic Composite Materials

   • L. V. Gorobinskii
   • N. Yu. Lysov
   • V. I. Zhun’

   OriginalPaper 24 December 2023 Pages: 1023 - 1027

4. Stability in Supersonic Flow of Complex-Shaped Composites Based on Reinforced Inorganic and Cold-Curing Hybrid Binders

   • V. M. Lalayan
   • E. V. Stegno
   • A. A. Berlin

   OriginalPaper 24 December 2023 Pages: 1017 - 1022

   

5. A Melamine Polyphosphate-Filled Thermoprotective Coating Based on Polyetherurethane Rubber and Chlorinated Epoxy Oligomers

   • O. I. Sidorov
   • V. A. Pilchenko
   • M. I. Buzin

   OriginalPaper 24 December 2023 Pages: 1008 - 1016

   

6. Estimating the Fuel Permeability of Thermoplastic Polyurethane from the Saturated Vapor Pressure of Kerosene

   • D. V. Kolotilin
   • E. A. Manzhelii
   • V. F. Danilov

   OriginalPaper 24 December 2023 Pages: 1004 - 1007

   

7. A Study of the Influence of Bis-Maleimides on the Properties of Oligoestermaleinates

   • V. A. Danilov
   • O. A. Kolyamshin
   • O. V. Stoyanov

   OriginalPaper 24 December 2023 Pages: 998 - 1003

   

8. Evaluation of Uniformity of Particle Distribution in Composite Materials Based on Molded Polyurethanes

   • R. A. Alekhina
   • S. P. Tuzhilin
   • Yu. A. Goncharova

   OriginalPaper 24 December 2023 Pages: 993 - 997

   

9. A Study of the Character of the Effect of an Organophosphorus Acid on the Physicochemical Characteristics of Block Copoly(sulfone arylate)s

   • A. Kh. Shaov
   • A. M. Kharaev
   • R. A. Kharaeva

   OriginalPaper 24 December 2023 Pages: 989 - 992

   

10. Some Aspects of the Generalized Energy Approach to the Processes of Destruction of Materials

    • M. I. Sidorov
    • M. E. Stavrovskii
    • D. I. Petrovskii

    OriginalPaper 24 December 2023 Pages: 984 - 988

    

11. The Effect of Liquid Viscosity on Aerosol Parameters upon Ultrasonic Spraying

    • R. I. Nigmetzyanov
    • S. K. Sundukov
    • D. S. Fatyukhin

    OriginalPaper 24 December 2023 Pages: 978 - 983

    

12. Automated Dosing Equipment for Triplex Production by the Pouring Method

    • V. S. Bezmenov

    OriginalPaper 24 December 2023 Pages: 971 - 977

    

13. Application of Various Brands of Silica Fillers in the Formulation of Treads of Car Tires

    • A. Yu. Lyushtyk
    • S. N. Kayushnikov
    • O. V. Stoyanov

    OriginalPaper 24 December 2023 Pages: 965 - 970

    

14. A Study of the Influence of Negative Temperatures on the Impact Strength of a Carbon-Fiber Composite with a Hybrid Matrix

    • E. A. Kosenko
    • N. I. Baurova
    • V. A. Zorin

    OriginalPaper 24 December 2023 Pages: 957 - 964

15. Film Formers Based on Plant Raw Materials for Polyurethane Coatings: A Review

    • A. A. Kozlova
    • T. M. Rakova
    • D. S. Derkov

    OriginalPaper 24 December 2023 Pages: 949 - 956

    

16. The Influence of Loading Conditions under Mechanical Impact on Polymer Composite Materials

    • A. M. Gubin
    • I. N. Gulyaev

    OriginalPaper 24 December 2023 Pages: 941 - 948

    

17. Adhesive Materials Based on Copolymers of Sodium 2-Acrylamido-2-Methylpropane Sulfonate

    • L. B. Yakimtsova
    • Ya. K. Martinkevich
    • E. T. Krut’ko

    OriginalPaper 24 December 2023 Pages: 936 - 940

    

18. Kinetic Modeling of Synthesis of Cumene Hydroperoxide (a Curing Initiator for Acrylic Glues) in the Presence of Mg, Ca, Sr, or Ba 2-Ethylhexanoate as a Catalyst

    • N. V. Ulitin
    • N. A. Novikov
    • Kh. E. Kharlampidi

    OriginalPaper 24 December 2023 Pages: 928 - 935

    

19. Study of the Kinetics of the Interaction Process of Material of “Liquid” Phase and Epoxy Binder

    • E. A. Kosenko
    • V. A. Nelyub
    • N. I. Baurova

    OriginalPaper 24 December 2023 Pages: 924 - 927

    

20. A Theoretical and Experimental Study of Spindle Assembly Rigidity with a Polymer Interlayer in Supports of a Metalworking Machine

    • A. S. Kononenko
    • T. A. Kildeev

    OriginalPaper 24 December 2023 Pages: 916 - 923

    

21. A Study of the Structure and Thermodynamic Properties of Polyvinyl Acetate Dispersion after Microwave Electromagnetic Treatment

    • S. P. Isaev
    • O. Yu. Erenkov
    • E. A. Kulikova

    OriginalPaper 24 December 2023 Pages: 909 - 915

    

22. Determination of Viscoelastic Characteristics of Epoxy–Sand Composites Used in Repair of Road Machinery

    • T. N. Egunova
    • N. I. Baurova
    • I. S. Nefelov

    OriginalPaper 24 December 2023 Pages: 905 - 908

    

23. Chemical Resistance of Epoxy Binders Based on Various Hardeners

    • Z. G. Sakoshev
    • A. N. Blaznov

    OriginalPaper 24 December 2023 Pages: 901 - 904

    

24. Mechanism of Cumene Oxidation into Cumene Hydroperoxide (Curing Initiator for Acrylic Adhesives) in the Presence of Ca, Sr, Ba Chloride Complex with Dibenzo-18-Crown-6 Ether

    • N. A. Novikov
    • N. V. Ulitin
    • O. V. Stoyanov

    OriginalPaper 24 December 2023 Pages: 892 - 900

    

25. The Influence of the Content of Halogen-Containing Oligomer in the Composition of VSK-14-6 Adhesive Binder on the Kinetics of the Curing Process of Prepregs on Different Fillers and a Comparative Analysis of the Curing Kinetics of Prepregs Based on VSK-14-1 Adhesive Binder

    • N. V. Antyufeeva
    • A. I. Starkov

    OriginalPaper 24 December 2023 Pages: 882 - 891

    

26. Methodological Aspects of Determining Fiber—Matrix Adhesive Strength by Pushing out Monofilament with an Indenter

    • A. I. Gulyaev
    • S. V. Sbitneva
    • P. N. Medvedev

    OriginalPaper 24 December 2023 Pages: 875 - 881

    

27. Ultrasonic Technologies in Producing Adhesive Joints: A Review

    • S. K. Sundukov

    OriginalPaper 24 December 2023 Pages: 868 - 874

    

28. Properties of Polymers Obtained by the Mechanism of Anionic Polymerization of Epoxy Resins under the Action of Imidazoles

    • M. S. Fedoseev
    • L. F. Derzhavinskaya

    OriginalPaper 24 December 2023 Pages: 862 - 867

    

29. The Effect of the Structure of Heterocyclic Monomers on the Heat Resistance of Epoxy Adhesives

    • V. F. Stroganov
    • E. A. Vdovin
    • I. V. Stroganov

    OriginalPaper 24 December 2023 Pages: 858 - 861

30. Properties of Composite Materials Based on Cardboard and Polymer Films

    • V. N. Serova
    • A. I. Khasanov

    OriginalPaper 24 December 2023 Pages: 855 - 857

31. Modern Phenolic Adhesives for Aviation and Engineering. Part 2. Chemical Modification

    • D. A. Aronovich
    • A. P. Petrova

    OriginalPaper 24 December 2023 Pages: 840 - 854

    

32. Calculating the Load-Bearing Capacity of Prestressed Wooden Beams

    • E. G. Khitrov
    • A. R. Birman
    • O. N. Kovaleva

    OriginalPaper 24 December 2023 Pages: 836 - 839

    

33. Deformation Properties of an Elastic Adhesive in Glue Joints under Quasi-Static Low-Cycle Mechanical Loads

    • V. G. Tsverava
    • M. Yu. Rusin
    • P. Yu. Yakushkin

    OriginalPaper 24 December 2023 Pages: 830 - 835

    

34. Studying the Rheokinetics of Curing Processes in Epoxy Amine Binders Modified with Carding Polysulfon

    • S. V. Polunin
    • I. Yu. Gorbunova
    • T. P. Kravchenko

    OriginalPaper 24 December 2023 Pages: 824 - 829

    

35. Main Components of Domestic Epoxy Adhesives (Review). Part II. Plasticizers and Elasticizers for Epoxy Adhesives

    • A. P. Petrova
    • A. Yu. Isaev
    • A. S. Emel’yanov

    OriginalPaper 24 December 2023 Pages: 810 - 823

    

36. Main Components Composing Domestic Epoxy Glues (Review). Part I

    • A. P. Petrova
    • A. Yu. Isaev
    • A. S. Emel’yanov

    OriginalPaper 24 December 2023 Pages: 799 - 809

    

37. Use of Lactam-Containing Plastisols from Halogenated Polymers for Improving the Strength of Adhesion between an Ethylene–Propylene Elastomer Composite and a Metal

    • A. F. Puchkov
    • M. P. Spiridonova
    • S. D. Kosobokova

    OriginalPaper 04 September 2023 Pages: 793 - 797

    

38. Modern Phenolic Adhesives for Aviation and Engineering. Part 1. The Effect of Modifying Additives

    • D. A. Aronovich
    • A. P. Petrova

    OriginalPaper 04 September 2023 Pages: 777 - 792

    

39. Technological and Performance Characteristics of an Epoxy Binder Treated by Prepreg Technology with a Hardening Temperature below 140°C

    • A. I. Tkachuk
    • Ya. M. Gurevich
    • M. A. Guseva

    OriginalPaper 04 September 2023 Pages: 771 - 776

    

40. Substantiation of Main Wastewater-Treatment Directions in the Production of Adhesive Compounds and Polymer-Containing Composites

    • K. A. Taraskin
    • D. S. Orlov
    • E. V. Surkov

    OriginalPaper 04 September 2023 Pages: 762 - 770

    

41. Properties of Wood-Fiber Board Manufactured with the Use of UFC-FF Modified Urea–Formaldehyde Resin

    • Yu. V. Pasko
    • O. P. Machneva

    OriginalPaper 04 September 2023 Pages: 758 - 761

    

42. Complex Thermoanalytical Studies of K-800 Organosilicon Adhesive

    • Yu. M. Kozhevnikova
    • I. G. Tolmacheva
    • I. A. Belobrova

    OriginalPaper 04 September 2023 Pages: 751 - 757

    

43. Criteria for the Operational and Economic Estimation of the Efficiency of Epoxy–Sand Composites of Different Compositions as Abrasive-Resistant Coatings of Parts of Tillow-Tool Implements

    • A. M. Mikhalchenkov
    • V. E. Torikov
    • N. D. Ulyanova

    OriginalPaper 04 September 2023 Pages: 746 - 750

    

44. The Effect of Vacuum Ion–Plasma Treatment on the Strength of an Adhesive Joint

    • E. D. Kolpachkov
    • O. I. Smirnov
    • I. A. Volkov

    OriginalPaper 04 September 2023 Pages: 742 - 745

    

45. Synthesis of a Polyurethane Hot-Melt Adhesive Based on Hydroxypropylated Diphenylolpropane and Properties of Adhesive Joints Based on It

    • I. N. Bakirova
    • V. A. Burylina

    OriginalPaper 04 September 2023 Pages: 736 - 741

    

46. Theoretical Substantiation of the Use of Natural Mineral Modifiers for Synthetic Resins

    • G. S. Varankina
    • D. S. Rusakov
    • S. G. Partenadze

    OriginalPaper 04 September 2023 Pages: 730 - 735

    

47. A Sealant Based on SKTN-A Low-Molecular-Weight Dimethylsiloxane Rubber Modified by Boron Nitride

    • V. Yu. Chukhlanov
    • O. G. Selivanov
    • N. V. Chukhlanova

    OriginalPaper 04 September 2023 Pages: 725 - 729

    

48. Properties and Functionality of VK-100 Conductive Adhesive

    • N. F. Lukina
    • K. L. Besednov
    • A. Yu. Isaev

    OriginalPaper 04 September 2023 Pages: 718 - 724

    

49. The Influence of Composition and Size of Gravel Filler Composite with Epoxy Basis on Its Abrasive Wear

    • A. M. Mikhalchenkov
    • S. A. Feskov
    • A. S. Kononenko

    OriginalPaper 04 September 2023 Pages: 714 - 717

    

50. A Study of the Baking Rheokinetics and Properties of a Thermal Protective Coating Based on Polyether Urethane Rubber with End Epoxy Urethane Groups and Melamine Polyphosphate

    • O. I. Sidorov
    • V. A. Pilchenko
    • D. V. Pleshakov

    OriginalPaper 04 September 2023 Pages: 706 - 713