1. An improved stability compensation for feedforward active noise control systems with acoustic feedback

   • Feng Li
   • Haichun Ding
   • Azhar Iqbal

   Original Article 06 February 2024 Pages: 507 - 518

2. Effect of SiC concentration on the mechanical properties and fracture modes of SiC/Al composites via cluster analysis of acoustic emission signals

   • Qi Wu
   • Ning Pei

   Original Article 06 February 2024 Pages: 519 - 526

3. Design and vibration reduction performance of honeycomb sandwich support rod for wind tunnel

   • Hao Huang
   • Qingpeng Han
   • Guangchao Wang

   Original Article 06 February 2024 Pages: 527 - 539

4. Imbalanced data fault diagnosis of rolling bearings using enhanced relative generative adversarial network

   • Jie Luo
   • Yinong Zhang
   • Xin Jing

   Original Article 07 February 2024 Pages: 541 - 555

5. Influence and sensitivity analysis of mortar void in CRTS II ballastless slab track on the vehicle-track dynamics

   • Xin Xin
   • Suxia Zhou
   • Chao Yang

   Original Article 07 February 2024 Pages: 557 - 568

6. Crosswind impacts on comfort of straddle monorail vehicle running on flexible track beam

   • Zhifang Ma
   • Yunhong Guo

   Original Article 07 February 2024 Pages: 569 - 577

7. Optimal design of earthquake-resistant containment for FPS-Isolated nuclear power plants with electromagnetic tuned liquid column damper inerter

   • Guangcai Han
   • Yanhong Wu
   • Zhihua Yue

   Original Article 07 February 2024 Pages: 579 - 594

8. Vibration response of beams supported by finite-thickness elastic foundation under a moving concentrated force

   • Jianjun Ma
   • Ju Wang
   • Ying Guo

   Original Article 07 February 2024 Pages: 595 - 604

9. An unsupervised mechanical fault classification method under the condition of unknown number of fault types

   • Yalun Zhang
   • Rongwu Xu
   • Wenjing Yu

   Original Article 07 February 2024 Pages: 605 - 622

10. An improved model of magnetorheological elastomer of frequency, magnetic field, and amplitude responses

    • Quang Du Nguyen
    • Xuan Bao Nguyen
    • Minh Tien Nguyen

    Original Article 07 February 2024 Pages: 623 - 637

11. A study on governance method of casing shear deformation in shale gas well

    • Qinglong Lei
    • Chenyang Chen
    • Xiaohua Zhu

    Original Article 07 February 2024 Pages: 639 - 648

12. Reliability evaluation of components with multiple failure modes based on mixture Weibull distribution using expectation maximization algorithm

    • Yuting Wu
    • Zhong Lu
    • Xihui Liang

    Original Article 07 February 2024 Pages: 649 - 660

13. Temperature effects on the resistance capacity of API X60 pipe elbow under bending moment using X-FEM method

    • Chaaben Arroussi
    • Azzedine Belalia
    • Mohammed Hadj Meliani

    Original Article 07 February 2024 Pages: 661 - 669

14. Design and structural safety verification of the tank trailer for liquid hydrogen transport

    • Hareem Lee
    • Rivaldo Mersis Brilianto
    • Chul Kim

    Original Article 07 February 2024 Pages: 671 - 681

15. Influence of initial microstructure on surface integrity of ultrasonic impacting strengthened 34CrNi3MoA steel crankshaft

    • Jianzhi Chen
    • Yunhai Zhuge
    • Guochao Li

    Original Article 07 February 2024 Pages: 683 - 689

16. Influence of liquid-fuel swirl injection pressure on the flow dynamics characteristics in a lean direct injection gas turbine combustor using Eulerian-Lagrangian large eddy simulations

    • Jong-Chan Kim
    • Euisung Yoo
    • Hong-Gye Sung

    Original Article 07 February 2024 Pages: 691 - 701

17. Numerical simulation of flow behavior in a urea liquid external gear pump with immersed solid method

    • Selvakumar Kumaresh
    • Man Young Kim

    Original Article 05 February 2024 Pages: 703 - 710

18. Investigating the performance of double-rotor wind turbine arrangement in large wind farms using the LES method

    • Vahid Mazidi Sharafabadi
    • Mani Fathali

    Original Article 05 February 2024 Pages: 711 - 720

19. Numerical study of the effect of the tunnel hood on micro-pressure wave for increasing high-speed train operation speed

    • Beomsu Kim
    • Junsun Ahn
    • Hyeokbin Kwon

    Original Article 05 February 2024 Pages: 721 - 733

20. Mechanical mechanism investigation on the influence of inter-particle friction in the triaxial powder pressing system

    • Huabo Liu
    • Shaozhen Hua
    • Guangpei Zhu

    Original Article 05 February 2024 Pages: 735 - 747

21. Multi-material topology optimization based on multiple simp of variable density method

    • Changdong Wan
    • Hongyu Jiao
    • Chunyan Lu

    Original Article 05 February 2024 Pages: 749 - 759

22. Compression and impact behaviors of twisted cellular thin-walled tubes

    • Teng Li
    • Qingtian Deng
    • Jingpeng Wen

    Original Article 05 February 2024 Pages: 761 - 773

23. Research on tire pattern parameters based on multi-objective optimization

    • Hongling Li
    • Yude Dong
    • Jinbiao Wang

    Original Article 05 February 2024 Pages: 775 - 786

24. Transmission characteristics of an RV reducer based on ADAMS

    • Huiliang Wang
    • Wenhua Fu
    • Tiancong Chen

    Original Article 05 February 2024 Pages: 787 - 802

25. Multi-objective optimization design of external rotor permanent magnet synchronous motor for robot arm

    • Fang Xie
    • Houying Wang
    • Ziang Zheng

    Original Article 05 February 2024 Pages: 803 - 814

26. Geometric parameter design and contact characteristics of beveloid gear and involute cylindrical gear transmission with crossed axes

    • Gaoxiang Ni
    • Zhanqi Liu
    • Yaofeng Cao

    Original Article 05 February 2024 Pages: 815 - 825

27. Feasibility study of resistance hydro rotary draw bending of commercial pure titanium tubes

    • Majid Elyasi
    • Fatemeh Taghizadeh Rami

    Original Article 06 February 2024 Pages: 827 - 833

28. Intelligent milling tool wear estimation based on machine learning algorithms

    • Yunus Emre Karabacak

    Original Article 06 February 2024 Pages: 835 - 850

29. A study on the effect of shape and number of supports in additive manufacturing process by using a macro heat transfer analysis

    • Seok-Chul Yun
    • Kyunsuk Choi
    • Jae-Woong Kim

    Original Article 06 February 2024 Pages: 851 - 860

30. Multi-objective optimization of laser welding process parameters of steel/Al based on BO-RF and MOJS

    • Xinran Zhang
    • Yonghuan Guo
    • Lanfeng Zhang

    Original Article 06 February 2024 Pages: 861 - 871

31. Overall stiffness derivation and enhancement algorithm of a flying cable-driven parallel robot

    • Tiantian Gao
    • Qin Wang
    • Song Wu

    Original Article 06 February 2024 Pages: 873 - 884

32. Vibration suppression method for dual-flexible manipulator considering bearing friction based on nonlinear disturbance observer

    • Dongyang Shang
    • Xiaopeng Li
    • Fanjie Li

    Original Article 06 February 2024 Pages: 885 - 900

33. Development of a real-time autonomous driving lateral control algorithm for an articulated bus using a model predictive control algorithm

    • Beomjoon Pyun
    • Hyungjeen Choi
    • Dohyun Jung

    Original Article 06 February 2024 Pages: 901 - 914

34. Fractional order time-delayed feedback control of hysteresis dynamics in giant magnetostrictive actuators

    • Hongbo Yan
    • Qingzhen Ma
    • Haitao Huang

    Original Article 06 February 2024 Pages: 915 - 929

35. Research on tuning method of PID controller parameter for hybrid magnetic bearing

    • Jinchang Han
    • Yan Li
    • Feng Xiong

    Original Article 06 February 2024 Pages: 931 - 941

36. Design and analysis of plantar hydraulic control device for body weight support treadmill training

    • Hui Bian
    • Zihan Li
    • Yu Zhang

    Original Article 06 February 2024 Pages: 943 - 955

37. Workspace analysis and size optimization of planar 3-DOF redundantly actuated parallel mechanism

    • Jing Zhang
    • Dongbao Wang
    • Ziming Kou

    Original Article 06 February 2024 Pages: 957 - 967

38. CFD simulations of plate-fin cross-counter flow compact heat exchanger

    • Won-Seok Kim
    • Pham Truong Thang
    • Beom-Keun Kim

    Original Article 06 February 2024 Pages: 969 - 978

39. Characteristics of combustion and ash deposition for pulverized coal combustion under various thermal loads: An experimental study in an 80 kWth combustion system

    • Hyunggeun Kwak
    • Jaewook Lee
    • Jongsup Hong

    Original Article 06 February 2024 Pages: 979 - 987

40. Design, theoretical, and experimental thermal analysis of a solar collector with flat mirrors mounted on a parabolic surface

    • Cuma Çetiner

    Original Article 06 February 2024 Pages: 989 - 996

41. Optimal refrigerant flow configurations in a fin-tube heat exchanger for an indoor unit of a heat pump using R466A

    • Amal Vasu
    • Yeon Sung Yoo
    • Young Soo Chang

    Original Article 15 February 2024 Pages: 997 - 1006

42. Enhanced wick-based liquid supply in patterned laser-induced graphene on flexible substrates

    • Minsoo Kang
    • Daeyoung Kong
    • Hyoungsoon Lee

    Original Article 08 February 2024 Pages: 1007 - 1014

43. Reviewer Acknowledgment 2023

    Acknowledgment 25 January 2024 Pages: 1015 - 1023