1. Development of features for blade rubbing defect classification in machine learning

   • Dong Hee Park
   • Jeong Jun Lee
   • Byeong Keun Choi

   Original Article 04 January 2024 Pages: 1 - 9

2. Random forest-based multi-faults classification modeling and analysis for intelligent centrifugal pump system

   • Kyuchang Chang
   • Seung Hwan Park

   Original Article 16 December 2023 Pages: 11 - 20

3. Nonlinear vibration of cross-ply laminated open shells under external excitation

   • Mohd Taha Parvez
   • Arshad Hussain Khan
   • Ahmad Saood

   Original Article 04 January 2024 Pages: 21 - 31

4. Control algorithm design of motorcycle semi-active suspension system via frequency division

   • Liujie Wu
   • Wang Ren
   • Bin Yu

   Original Article 05 January 2024 Pages: 33 - 47

5. The improvement of scientific foundations for the technical theory of pneumatic elements with rubber-cord membranes: thermo-dynamic model of force and geometric characteristics of air springs

   • Vladimir Sergeyevich Korneyev
   • Sergey Alexandrovich Korneyev
   • Viktor Vladimirovich Shalay

   Original Article 16 December 2023 Pages: 49 - 65

6. Collaborative control of trajectory tracking and braking stability of intelligent vehicles with a blowout tire

   • Yongjie Lu
   • Zexuan Han
   • Yanhu Li

   Original Article 08 January 2024 Pages: 67 - 78

7. Fault dynamic characteristics of convergent planet row

   • Changliang Tang
   • Jun Yang
   • Henglei Xu

   Original Article 06 January 2024 Pages: 79 - 88

8. Reducing effects of boundary condition in modal testing of flexible structures

   • Dong Jiang
   • Zhixiang Huang
   • Xiaochen Hang

   Original Article 08 January 2024 Pages: 89 - 99

9. Dynamic characteristic analysis of a twin-spool rotor–casing system with looseness and intershaft rubbing coupling faults

   • Jun Shao
   • Jigang Wu
   • Yuan Zhang

   Original Article 08 January 2024 Pages: 101 - 120

10. Improvement of vibration isolation performance of multi-mode control seat suspension system through road recognition using wavelet-LSTM approach

    • Xiaofeng Zhang
    • Xiandong Liu
    • Tian He

    Original Article 08 January 2024 Pages: 121 - 136

11. Shimmy vibration analysis of unmanned aircraft coupled with landing gears

    • S. Sivakumar
    • L. R. Ganapathy Subramanian
    • V. Giridharan

    Original Article 08 January 2024 Pages: 137 - 147

12. Tightening torque effect on fatigue performance of single-lap joints

    • H. S. Ho
    • Y. He
    • E. Zhang

    Original Article 05 January 2024 Pages: 149 - 155

13. Damage onset in CFRP single lap joint for DD and QUAD laminates

    • Glosdemberger Cardoso Alves
    • Lucas Lisbôa Vignoli
    • Ranulfo Martins Carneiro Neto

    Original Article 05 January 2024 Pages: 157 - 162

14. Microstructural, mechanical, and tribological properties of a novel hybrid LLDPE/PTFE/x wt.% GNPs for bearing surface applications

    • A. El-Sayed M. Hassan
    • A. M. I. Abu-Oqail
    • Mohamed Abu-Okail

    Original Article 05 January 2024 Pages: 163 - 175

15. Research on fatigue life and damage tolerance design of metro bogie frame

    • Hongyu Hu
    • Yi Yin
    • Qiang Li

    Original Article 05 January 2024 Pages: 177 - 186

16. Effects of root gap on anti-fatigue properties of fillet welds for a tie rod seat of locomotive bogie

    • Miao-Xia Xie
    • Qi-Ke Xin
    • Suck-Joo Na

    Original Article 05 January 2024 Pages: 187 - 199

17. Enhancement of tribology behaviour by the addition of different fiber length of pineapple fiber reinforced polyester composite

    • S. Krishnakumar
    • V. Mohanavel
    • K. Balasubramanian

    Original Article 05 January 2024 Pages: 201 - 206

18. Effect of laser direct metal deposition process on the microstructure and mechanical properties and temperature and stress fields of 24CrNiMo

    • Yongsheng Zhao
    • Hui Chen
    • Chenggang Ding

    Original Article 06 January 2024 Pages: 207 - 220

19. Analysis of the temperature evolution in cyclic loading using the thermoelastic effect with plastic deformation

    • Sanglok Park
    • Hyong-Sub Shim
    • Joo-Hyung Kim

    Original Article 08 January 2024 Pages: 221 - 228

20. Solution reconstruction for computational fluid dynamics via artificial neural network

    • Seongmun Jung
    • Oh Joon Kwon

    Original Article 08 January 2024 Pages: 229 - 244

21. Optimization design and research of ultrasonic flowmeter based on time difference method

    • Chang Chen
    • Weijie Sun
    • Shaohui Su

    Original Article 05 January 2024 Pages: 245 - 258

22. Influence of cavitation on inducer and return channels of LNG pump

    • Yong-Jin Son
    • Yong-In Kim
    • Young-Seok Choi

    Original Article 05 January 2024 Pages: 259 - 270

23. Flow fluctuation abatement method and flow characteristics of lobe pump by external noncircular gear drive

    • Dawei Liu
    • Chao Xu
    • Xin Jin

    Original Article 05 January 2024 Pages: 271 - 284

24. An experimental and numerical investigation on rock cutting behavior of specially-shaped PDC cutter

    • Weiji Liu
    • Kaichuang Deng
    • Xiaohua Zhu

    Original Article 04 January 2024 Pages: 285 - 298

25. A stacking ensemble learning for ship fuel consumption prediction under cross-training

    • Mengjie Ma
    • Zhuo Sun
    • Huirong Yang

    Original Article 08 January 2024 Pages: 299 - 308

26. A fast GA-ANN model and application in multi-objective optimization of the sealing ring for the subsea pipeline connector with regard of the penetration load

    • Kefeng Jiao
    • Feihong Yun
    • Liquan Wang

    Original Article 05 January 2024 Pages: 309 - 322

27. Stress field analysis of functionally graded polar orthotropic disk on a rigid inclusion subjected to variable angular velocity

    • Ali Motameni
    • Ömer Can Farukoğlu
    • Rıza Gürbüz

    Original Article 05 January 2024 Pages: 323 - 332

28. Double-stage multi-objective optimized design for cycloid pinwheel reducer based on genetic algorithm

    • Song Gao
    • Yueming Zhang
    • Wentai Li

    Original Article 08 January 2024 Pages: 333 - 345

29. A micro resonant pressure sensor with adjustable quality factor

    • Jianhua Ren
    • Dezhi Hou
    • Xiaorui Fu

    Original Article 05 January 2024 Pages: 347 - 356

30. Transparent and flexible led-embedded display film using micro metal mesh

    • Munhyung Jo
    • Dong Jin Kim
    • Usama Tahir

    Original Article 08 January 2024 Pages: 357 - 363

31. A novel path tracking system for autonomous vehicle based on model predictive control

    • Zeyu Sun
    • Ruochen Wang
    • Qing Ye

    Original Article 04 January 2024 Pages: 365 - 378

32. Design and analysis of anti-overturning mechanism for magnetic wall-climbing robot

    • Gang Wang
    • Wenjun Li
    • Honglei Che

    Original Article 13 January 2024 Pages: 379 - 387

33. Research on design and trajectory tracking control of a variable size lower limb exoskeleton rehabilitation robot

    • Ruqiang Mou
    • Le Li

    Original Article 05 January 2024 Pages: 389 - 400

34. Hypervelocity impact simulations on space structures using various shielding systems

    • Hyun-Cheol Shin
    • Mi Jang
    • Jae-Sang Park

    Original Article 27 December 2023 Pages: 401 - 410

35. Modeling of attractive force of magnetic wheel under different wall structure and attitude used for climbing robot

    • Cheng Wang
    • Shiqiang Zhu
    • Binrui Wang

    Original Article 05 January 2024 Pages: 411 - 421

36. Kinematics, dynamics and multi-objective optimization based on singularity-free task workspace for a novel SCARA parallel manipulator

    • Dong Liang
    • Yi Mao
    • Tao Sun

    Original Article 08 January 2024 Pages: 423 - 438

37. A comprehensive parametric and structural bond analysis of an actual vapor compression refrigeration system with dedicated mechanical subcooled system

    • Naveen Solanki
    • Akhilesh Arora
    • Raj Kumar Singh

    Original Article 08 January 2024 Pages: 439 - 452

38. Fuel injection rate variation of a piezoelectric injector according to the charge current patterns

    • Ji Heum Baek
    • Choong Hoon Lee

    Original Article 08 January 2024 Pages: 453 - 461

39. Adaptive iterative learning control of internal temperature for high-speed trains

    • Chunjun Chen
    • Qin Zheng
    • Lu Yang

    Original Article 06 January 2024 Pages: 463 - 473

40. Continuum model template to analyze complex parameters for engine cooling

    • Md Masuduzzaman
    • HyeonJun Kim
    • BoHung Kim

    Original Article 08 January 2024 Pages: 475 - 481

41. Performance and flow characteristics of a novel air bleeding aerodynamic combustor diffuser

    • Yue Yan
    • Peng-fei Zhu
    • Yan-hui Wu

    Original Article 08 January 2024 Pages: 483 - 494

42. Numerical assessment of low-speed impacts on ballistic gelatin on a spring stage as a human bio-simulant

    • Taeho Yang
    • Yong-Sik Kim
    • Nicholas G. Dagalakis

    Original Article 04 January 2024 Pages: 495 - 503