1. Prediction of rolling bearing performance degradation based on sae and TCN-attention models

   • Yaping Wang
   • Dekang Hou
   • Chaonan Yang

   Original Article 03 April 2023 Pages: 1567 - 1583

2. Dynamic behavior analysis of rigid-flexible coupling planar mechanism considering dry clearances and lubrication clearances

   • Xiulong Chen
   • Tao Wang

   Original Article 03 April 2023 Pages: 1585 - 1600

3. An improved bearing fault diagnosis method based on variational mode decomposition and adaptive iterative filtering (VMD-AIF)

   • Lei Fu
   • Zepeng Ma
   • Libin Zhang

   Original Article 01 April 2023 Pages: 1601 - 1612

4. Analysis of contact characteristics of ball screws under the combined loads considering non-uniform load distribution

   • Yongjiang Chen
   • Jianghai Zhao
   • Jingkai Sun

   Original Article 03 April 2023 Pages: 1613 - 1621

5. Design of personal mobility system for assisted agricultural work with self-adjusting center of gravity

   • Zixuan Jiang
   • Chul-Hee Lee

   Original Article 03 April 2023 Pages: 1623 - 1635

6. Bearing fault diagnosis of wind turbines based on dynamic multi-adversarial adaptive network

   • Miao Tian
   • Xiaoming Su
   • Xianming Sun

   Original Article 02 April 2023 Pages: 1637 - 1651

7. Multibody dynamics analysis of a silent chain drive timing system

   • Jinxing Yang
   • Zengming Feng
   • Kai Xu

   Original Article 03 April 2023 Pages: 1653 - 1664

8. Dynamic modeling method for active magnetic bearings-rotor system of steam turbines

   • Chao Wu
   • Zhenzhong Su
   • Hao Jiang

   Original Article 01 April 2023 Pages: 1665 - 1673

9. Dynamic analysis of top-loader washing machine with unbalance mass during dehydration and its validation

   • Ji-Su Jeong
   • Jeong-Hyun Sohn
   • Jin-Hong Park

   Original Article 03 April 2023 Pages: 1675 - 1684

10. Dynamic modeling and parameter identification of a track stabilizing device coupled system

    • Chunjun Chen
    • Huijie Qin
    • Ji Deng

    Original Article 04 April 2023 Pages: 1685 - 1697

11. Dynamic characteristics and experimental study of double layer vibration isolation system

    • M. T. Wang
    • K. Chai
    • W. R. Shi

    Original Article 04 April 2023 Pages: 1699 - 1709

12. Frequency capture characteristic of a vibration system driven by four counterrotating unbalanced rotors

    • Xiaozhe Chen
    • Junqi Liu
    • Baitong Zhou

    Original Article 01 April 2023 Pages: 1711 - 1722

13. Elastic wave properties in ultra-high strength steel (HV670) exposed to various corrosive solutions

    • Ki-Sik Lee
    • Jae-Eun Paeng
    • Ki-Woo Nam

    Original Article 02 April 2023 Pages: 1723 - 1729

14. 3D implementation of push-out test in ABAQUS using the phase-field method

    • Xianbin Yu
    • Ronghui Wang
    • Xiaoxia Zhen

    Original Article 02 April 2023 Pages: 1731 - 1745

15. Anisotropy evolution of wide magnesium alloy foils during continuous electroplastic rolling

    • Lipo Yang
    • Hailong Zhang
    • Gengliang Liu

    Original Article 02 April 2023 Pages: 1747 - 1759

16. Fatigue crack growth behavior of AA2024T3 under mixed mode loading within the framework of EPFM

    • A. Remadi
    • A. Bahloul
    • C. H. Bouraoui

    Original Article 02 April 2023 Pages: 1761 - 1771

17. Analytical study on rationalize and reliability improvement of maintenance against stress corrosion cracking in stainless steel welds of lwr primary system

    • Kyoung-Hee Gu
    • Kotoji Ando
    • Ki-Woo Nam

    Original Article 03 April 2023 Pages: 1773 - 1780

18. Effect of grinding depth on fatigue fracture behaviors of 40Cr steel

    • Jianzhi Chen
    • Guochao Li
    • Honggen Zhou

    Original Article 03 April 2023 Pages: 1781 - 1787

19. Research on fatigue remaining life of structures for a dynamic lifting process of a bridge crane

    • Chenggang Li
    • Qisong Qi
    • Yu Fan

    Original Article 04 April 2023 Pages: 1789 - 1801

20. Characterization of swarf Al/(Al₂O₃/GNs) Ag composite fabricated using stir casting and rolling process

    • Hossam M. Yehia
    • Nasreen Abdelalim
    • W. Hoziefa

    Original Article 03 April 2023 Pages: 1803 - 1809

21. Analysis of the influence of the interphase thickness and Young’s modulus based on the 3-phase composites for the design of graphene nanocomposites

    • Hee-Dong Kim
    • Heung-Shik Lee

    Original Article 01 April 2023 Pages: 1811 - 1818

22. A novel T-S fuzzy fault tree hybrid method for failure risk and multi-state reliability analysis of integrated production manufacturing system based on CPS

    • Xiaoping Bai
    • Xiangyun Gu

    Original Article 04 April 2023 Pages: 1819 - 1828

23. TDL-based spectroscopy for simultaneous measurement of multiple gas properties using a single absorption line

    • Hanseul Shim
    • Gyeongrok Kim
    • Gisu Park

    Original Article 01 April 2023 Pages: 1829 - 1844

24. Recoil reduction design of gas-controlled side-jet gun based on bifurcated two-phase flow model

    • Ming Qiu
    • Fei Guo
    • Peng Si

    Original Article 03 April 2023 Pages: 1845 - 1857

25. A study on a partially-open bogie fairing to improve anti-snow performance of a high-speed train

    • Beomsu Kim
    • Junsun Ahn
    • Hyeokbin Kwon

    Original Article 23 February 2023 Pages: 1859 - 1869

26. Study on liquid-solid jet erosion characteristics of 316L stainless steel

    • Guan Wang
    • Qianfeng Gao
    • Xuejun Zhu

    Original Article 04 April 2023 Pages: 1871 - 1882

27. Influence of errors and floating on static load-sharing characteristics of twin rotors concentric face-gear power-split transmission system

    • Hao Dong
    • Hao-Qin Zhang
    • Xiao-Long Zhao

    Original Article 02 April 2023 Pages: 1883 - 1901

28. Mutually different tooth surface contact characteristics of a noncircular face gear with intersecting axes

    • Dawei Liu
    • Heng Li
    • Yuetong Cao

    Original Article 01 April 2023 Pages: 1903 - 1912

29. Numerical study on the thermal buckling of functionally graded sandwich plates

    • Jin-Rae Cho

    Original Article 02 April 2023 Pages: 1913 - 1922

30. Enhancing the stretch ratio of a vertically stacked wavy circuit in stretchable devices

    • Oluwabukola Adebisi
    • Jung-Hoon Yun

    Original Article 04 April 2023 Pages: 1923 - 1929

31. A hybrid manufacturing process for a microgripper using selective laser melting 3D printing and wire EDM

    • Ki Young Song
    • Geon Hwee Kim
    • Jongho Shin

    Original Article 04 April 2023 Pages: 1931 - 1937

32. Influence of microgroove cutting tool on cutting energy and cutting performance during turning of Inconel 718

    • Jiachun Li
    • Zhongfei Zou

    Original Article 02 April 2023 Pages: 1939 - 1948

33. Tool wear monitoring based on an improved convolutional neural network

    • Jia-Wei Zhao
    • Shi-Jie Guo
    • Nan Zhang

    Original Article 03 April 2023 Pages: 1949 - 1958

34. Extraction of line objects from piping and instrumentation diagrams using an improved continuous line detection algorithm

    • Yoochan Moon
    • Seung-Tae Han
    • Duhwan Mun

    Original Article 03 April 2023 Pages: 1959 - 1972

35. A CAD model retrieval framework based on correlation network and relevance ranking

    • Baoning Ji
    • Jie Zhang
    • Wenbin Tang

    Original Article 03 April 2023 Pages: 1973 - 1984

36. Reformation of mistuned blade profile with a novel device offering multiple point loads

    • Aniket Anil Hase
    • Jen-Yuan Chang

    Original Article 01 April 2023 Pages: 1985 - 1997

37. Investigations on the effect of friction crush welding parameters in joining 6061 aluminium alloy to 304 stainless steel

    • Prem Singh
    • Dharmpal Deepak
    • Gurinder Singh Brar

    Original Article 04 April 2023 Pages: 1999 - 2008

38. Realization of sharp bending corner: evenly spaced protrusions by local thickening rolling

    • Sungyong Koo
    • Bonggeun Chang
    • Sungwook Choi

    Original Article 04 April 2023 Pages: 2009 - 2017

39. A Voronoi path planning extracted from improved skeleton for dynamic environments

    • Lin Jiang
    • Jun Li
    • Rui Lin

    Original Article 02 April 2023 Pages: 2019 - 2032

40. Simple desired manipulability ellipsoid with velocity and force for control of redundant manipulator

    • Yun Seok Choi
    • Issac Rhee
    • Hyouk Ryeol Choi

    Original Article 01 April 2023 Pages: 2033 - 2041

41. Moisture evaporation prediction model for fresh storage of vegetables in refrigerator

    • Hyeongsik Kim
    • Jooshin Kim
    • Sang-Hu Park

    Original Article 02 April 2023 Pages: 2043 - 2054

42. Numerical investigation on subcooled boiling heat transfer coefficient of water-ethanol mixture by CISCAM technique

    • Suhas Badakere Gopalakrishna
    • Chidanand Kishor Mangrulkar
    • Sathyabhama Alangar

    Original Article 02 April 2023 Pages: 2055 - 2067

43. In-situ braking torque and temperature analysis of two-wheeler drum brake in friction braking

    • Rakesh Kumar Singh
    • Chiranjit Sarkar

    Original Article 02 April 2023 Pages: 2069 - 2077

44. Liquid-cooled cold plate for a Li-ion battery thermal management system designed by topology optimization

    • Yijun Wang
    • Xuan Quang Duong
    • Jae Dong Chung

    Original Article 01 April 2023 Pages: 2079 - 2086

45. Cyclic operation of a membrane-based vacuum dehumidification system by finite selectivity of the membrane

    • Donik Ku
    • Soojin Bae
    • Minsung Kim

    Original Article 04 April 2023 Pages: 2087 - 2094

46. Influence of PEMFC degradation on its performance in different temperature and relative humidity conditions

    • Haelee Lee
    • Sanghun Jeong
    • Minsung Kim

    Original Article 02 April 2023 Pages: 2095 - 2108

47. Development of an elastic storage-release prosthetic foot that mimics the metatarsal bone head and midtarsal joint

    • SuChak Ryu
    • JoonHyub Kim
    • Seung Hyeon Kim

    Original Article 02 April 2023 Pages: 2109 - 2117

48. Patient-specific simulation of high-intensity focused ultrasound for head and neck cancer ablation

    • Abdul Mohizin
    • Bibin Prasad
    • Jung Kyung Kim

    Original Article 02 April 2023 Pages: 2119 - 2130

49. Erratum to “Development of a single particle sizing system for monitoring abrasive particles in chemical mechanical polishing process”

    • Changmin Kim
    • Sungwon Choi
    • Taesung Kim

    Erratum 04 April 2023 Pages: 2131 - 2131