1. Sustainable 3D printing with recycled materials: a review

   • Shivani Lodha
   • Bo Song
   • Seung-Kyum Choi

   Invited Review Article 10 November 2023 Pages: 5481 - 5507

2. Ultrasonic atomization of magnesium alloy AZ61 based on the TIG melting method

   • Jan Jaros
   • Daniel Koutny
   • Sascha Senck

   Original Article 02 September 2023 Pages: 5513 - 5519

3. Influence of process parameters on temperature field and residual strain in FFF-printed parts

   • Alberto Corvi
   • Luca Collini
   • Adrian Lutey

   Original Article 07 October 2023 Pages: 5521 - 5527

4. Strategies for wire arc additive manufacturing of thin walls and overhangs

   • Jakub Slavíček
   • Jakub Franke
   • Daniel Koutný

   Original Article 07 October 2023 Pages: 5529 - 5534

5. Penetration testing of 3D printed projectiles made of various types of polymers

   • Muhamed Bisić
   • Faruk Razić
   • Mustafa Bevrnja

   Original Article 12 September 2023 Pages: 5535 - 5539

6. Manufacturing parameter influence on FDM polypropylene tensile properties

   • Aleksa Milovanović
   • Zorana Golubović
   • Aleksandar Sedmak

   Original Article 04 October 2023 Pages: 5541 - 5547

7. Printing orientation influence on tensile strength of PA12 specimens obtained by SLS

   • Ivana Jevtić
   • Zorana Golubović
   • Miloš Milošević

   Original Article 04 October 2023 Pages: 5549 - 5554

8. Static and fatigue behavior of 3D printed PLA and PLA reinforced with short carbon fibers

   • Estera Vălean
   • Pietro Foti
   • Liviu Marșavina

   Original Article 04 October 2023 Pages: 5555 - 5559

9. Experimental setup for testing climatic stress component in vegetation via AM: challenges and new opportunities

   • Ozge Ogut
   • Ole Emil Herrmann
   • Chiara Bertolin

   Original Article 04 October 2023 Pages: 5561 - 5567

10. Determination of the influence of infill pattern and fiberglass reinforcement on the tensile properties of additively manufactured material by FDM technology

    • Marko Delić
    • Vesna Mandić
    • Dušan Arsić

    Original Article 09 November 2023 Pages: 5569 - 5575

11. The influence of material infill on ABS-X flexural strength

    • Isaak Trajković
    • Aleksandra Dragičević
    • Miloš Milošević

    Original Article 08 November 2023 Pages: 5577 - 5581

12. Acoustic signal analysis for gear fault diagnosis using a uniform circular microphone array

    • Chi Li
    • Changzheng Chen
    • Xiaojiao Gu

    Original Article 09 November 2023 Pages: 5583 - 5596

13. A new hybrid method for bearing fault diagnosis based on CEEMDAN and ACPSO-BP neural network

    • Shanshan Song
    • Shuqing Zhang
    • Wei Ma

    Original Article 08 November 2023 Pages: 5597 - 5606

14. Optimal design of nuclear power plants containment with tuned mass damper inerter device for earthquake loadings

    • Guangcai Han
    • Yanhong Wu
    • Zhihua Yue

    Original Article 08 November 2023 Pages: 5607 - 5621

15. Numerical investigation of the dynamic response of a simplified floating structure subjected to two underwater explosion bubbles

    • Xudong Jiang
    • Yuxiang Wang
    • Cheng Sun

    Original Article 08 November 2023 Pages: 5623 - 5633

16. Transverse vibration of the boring bar for BTA deep hole machining under stochastic excitation

    • Quanbin Zhang
    • Wu Zhao
    • Shuangxi Jing

    Original Article 08 November 2023 Pages: 5635 - 5648

17. Lightweight fault diagnosis method in embedded system based on knowledge distillation

    • Ran Gong
    • Chenlin Wang
    • Yi Xu

    Original Article 09 November 2023 Pages: 5649 - 5660

18. Multi-objective optimization of multi-axle heavy duty vehicle ride comfort and handling stability based on analytical target cascading method

    • Yimeng Fu
    • Xiaojun Zhou

    Original Article 08 November 2023 Pages: 5661 - 5682

19. Theoretical analysis of non-linear dynamic response of a bridge pier under two-phase flow excitation

    • Loic Z. Ngou
    • Hyacinthe K. Simo
    • Yves C. Mbono Samba

    Original Article 08 November 2023 Pages: 5683 - 5693

20. Characteristics of vibration response of ball bearing with local defect considering skidding

    • Yu Tian
    • Changfeng Yan
    • Lixiao Wu

    Original Article 08 November 2023 Pages: 5695 - 5711

21. A structural response reconstruction method based on a continuous-discrete state space model

    • Fanghua Chen
    • Zhenrui Peng

    Original Article 08 November 2023 Pages: 5713 - 5723

22. Free vibration analysis of functionally graded plates with different porosity distributions and grading patterns

    • Xuchu Hu
    • Tao Fu

    Original Article 08 November 2023 Pages: 5725 - 5738

23. Transfer path analysis using deep neural networks trained by measured operational responses

    • Dooho Lee
    • Yun-Yeong Park

    Original Article 10 November 2023 Pages: 5739 - 5750

24. Rotational behavior of carbodies and design improvement for a mountain tram running on sharply curved roads

    • Sungil Seo
    • Jea Hoon Yeon

    Original Article 10 November 2023 Pages: 5751 - 5758

25. Adaptive range selection for parameter optimization of VMD algorithm in rolling bearing fault diagnosis under strong background noise

    • Ziyou Zhou
    • Wenhua Chen
    • Ce Yang

    Original Article 09 November 2023 Pages: 5759 - 5773

26. Fourier ptychographic microscopy utilizing chromatic aberration for extended depth of field

    • Soo Hwan Seo
    • Hyun Choi

    Original Article 10 November 2023 Pages: 5775 - 5780

27. Design of a lateral active suspension controller for railway vehicles: a focus on ride comfort and perturbations

    • Jungwan Park
    • Hyunseok Yang

    Original Article 08 November 2023 Pages: 5781 - 5788

28. Individual drive cross-coupled control system to compensate for measurement time-delay for roll-to-roll contact pressure uniformization

    • Daehyeon Kim
    • Youngjin Kim
    • Dongho Oh

    Original Article 10 November 2023 Pages: 5789 - 5795

29. Weibull parameter estimation and reliability analysis with small samples based on successive approximation method

    • Jin Guo
    • Xiangwei Kong
    • Liyang Xie

    Original Article 08 November 2023 Pages: 5797 - 5811

30. Evaluation of the mechanical properties of aircraft composite materials after indentation

    • Marius Jatulis
    • Eltahry Elghandour
    • Nagwa Elzayady

    Original Article 08 November 2023 Pages: 5813 - 5821

31. Acoustic characteristic of bio-composite micro-perforated panel (BC-MPP) backed with natural fiber

    • Faridah Wahab
    • Tan Wei Hong
    • Nor Hafizul Hilni Abdul Rahman

    Original Article 08 November 2023 Pages: 5823 - 5829

32. Multi-objective optimization of a co-rotating twin-screw gear transmission system based on heuristic search

    • Mingzhu Hu
    • Haixia Wang
    • Huaiju Liu

    Original Article 08 November 2023 Pages: 5831 - 5841

33. Variable speed sliding mode control of magnetic suspension linear synchronous motor based on feedback linearization

    • Yunpeng Sun
    • Yipeng Lan
    • Cheng Lei

    Original Article 08 November 2023 Pages: 5843 - 5853

34. Morphological, microstructural, and mechanical study of FGM coatings prepared using the HVOF technique

    • Prabhat Ranjan
    • Rajesh Kumar
    • R. S. Walia

    Original Article 13 November 2023 Pages: 5855 - 5864

35. Study on the transient coupling of flow characteristics and heat transfer for a reciprocating piston oil-injection cooling

    • Hong Wang
    • Hancong Xu
    • Zhanpeng Zhou

    Original Article 08 November 2023 Pages: 5865 - 5874

36. Analysis of extreme wall-shear stress and vortical structure through direct numerical simulation of transitional flow in a stenosed carotid artery

    • Dongmin Kim
    • Jinyul Hwang
    • Won-Min Jo

    Original Article 08 November 2023 Pages: 5875 - 5890

37. Effects of Reynolds number on the flow field in a low-pressure turbine with incoming wakes

    • Xu Zhao
    • Yunfei Wang
    • Bin Zheng

    Original Article 08 November 2023 Pages: 5891 - 5900

38. Effect of initial velocity distribution and Reynolds number on two-dimensional wall jet of transition region impinging

    • Gentaro Takeda
    • Yu Ito
    • Shun Akutsu

    Original Article 08 November 2023 Pages: 5901 - 5911

39. Parametric study of a projectile launched by a compressed air cannon

    • Woojin Sung
    • Jihoon Kim
    • Jaiyoung Ryu

    Original Article 08 November 2023 Pages: 5913 - 5933

40. Research on active flow control to reduce aerodynamic drag of mira notchback model

    • Yingchao Zhang
    • Ruizhuo Zhou
    • Chengchun Zhang

    Original Article 09 November 2023 Pages: 5935 - 5942

41. Investigation on quasi-static and dynamic mechanical properties of disc springs considering asymmetric frictional boundary

    • Yanfeng Zhou
    • Dan Wang
    • Rupeng Zhu

    Original Article 08 November 2023 Pages: 5943 - 5955

42. Characteristics of triangle in triangulated cylindrical origami with axial load test for space deployable structures

    • Divlan Audie Sentanu
    • Muhammad Akhsin Muflikhun

    Original Article 09 November 2023 Pages: 5957 - 5964

43. A rapid prediction method for the stiffness and the machining accuracy evaluation of a parallel kinematic mechanism

    • Mengrui Shi
    • Hao Li
    • Haitao Liu

    Original Article 08 November 2023 Pages: 5965 - 5978

44. Additive manufacturing processes and materials for spare parts

    • Salmi Mika
    • Eujin Pei

    Original Article 09 November 2023 Pages: 5979 - 5990

45. Determination of line heating conditions for plate forming using the strain directed boundary method based on deformation superposition

    • Hee-Chan Yoon
    • Hong-Jun Noh
    • Hyun-Ik Yang

    Original Article 08 November 2023 Pages: 5991 - 6002

46. Decision of impedance-based scaling factor for workspace mapping in teleoperation

    • Taemun Park
    • Hak Yi

    Original Article 08 November 2023 Pages: 6003 - 6009

47. Effect of operating and geometrical parameters on real-time thermal effectiveness of closed-loop borehole heat exchangers in GSHP application

    • Satish Kumar
    • K. Murugesan

    Original Article 09 November 2023 Pages: 6011 - 6018

48. Unsteady analysis of a solar air heater with sensible heat storage using 2D finite difference approximation

    • Nguyen Minh Phu
    • Lai Hoai Nam
    • Nguyen Le Hong Son

    Original Article 08 November 2023 Pages: 6019 - 6028

49. Recoil reduction and projectile velocity improvement design of recoilless gun with combustible cartridge

    • Pengzhan Liu
    • Guoqiang Wang
    • Xiongfei Zhao

    Original Article 08 November 2023 Pages: 6029 - 6036

50. Development of a 1D solution algorithm to predict ejector performance in high altitude wind tunnels

    • Hyunwoo Park
    • Sang Hun Kang

    Original Article 10 November 2023 Pages: 6037 - 6045