1. A grinding profile design method for rails in the switch area considering a representative set of wheel profiles

   • Dilai Chen
   • Gengchen Sun
   • Gang Shen

   Original Article 04 October 2023 Pages: 4923 - 4933

2. Effect on tower crane structural vibration under the lifting-luffing coupling condition

   • Fu Liu
   • Jianwei Yang
   • Xiaohui Wang

   Original Article 04 October 2023 Pages: 4935 - 4947

3. Experimental and numerical study on the detection of fatigue failure in hydraulic turbines

   • Xavier Sánchez-Botello
   • Adolfo de la Torre
   • Xavier Escaler

   Original Article 06 October 2023 Pages: 4949 - 4955

4. Nonlinear response analysis of variable speed rotor system under maneuvering flight

   • Xueyang Miao
   • Junzeng He
   • Qingguo Fei

   Original Article 06 October 2023 Pages: 4957 - 4971

5. Experimental study of coupled acoustic-mechanical bandgaps

   • Daniel Nunez-Solano
   • Junghwan Kook
   • Virginia Puyana-Romero

   Original Article 06 October 2023 Pages: 4973 - 4980

6. Assembly tightness detection of bolt connections using gray-level images with high-order cumulants

   • Yong Xia
   • Xiaoli Zhang
   • Yong Xiao

   Original Article 06 October 2023 Pages: 4981 - 4988

7. Study on the nonconcentricity of the high-pressure rotor of the aero-engine

   • Xiangxiang Shen
   • Guo Chen

   Original Article 04 October 2023 Pages: 4989 - 5002

8. Analysis of the muzzle dynamic response interval based on the bond space method

   • Fu He
   • Jinsong Dai
   • Maosen Wang

   Original Article 04 October 2023 Pages: 5003 - 5014

9. Pipeline mapping with crawler-type in-pipe robot feature

   • Jungwan Park
   • Hyunseok Yang

   Original Article 04 October 2023 Pages: 5015 - 5020

10. CNN-based fault classification considered fault location of vibration signals

    • Jeong Jun Lee
    • Deok Young Cheong
    • Byeong Keun Choi

    Original Article 05 October 2023 Pages: 5021 - 5029

11. Research on floating slab track isolator based on mixed media theory

    • Zheng Fang
    • Chuanzhi Geng

    Original Article 05 October 2023 Pages: 5031 - 5045

12. Acoustic study on the thermal aging of sound-absorbing polyurethane foam

    • Sung Soo Yang
    • Jun Heo
    • Yeon June Kang

    Original Article 05 October 2023 Pages: 5047 - 5054

13. Characterization and application of nano-composite zinc oxide/poly vinyl alcohol thin-film in solar cell performance enhancement

    • Shaheer Ahmed Khan
    • Ataur Rahman
    • Syed Mustafa Haider

    Original Article 01 September 2023 Pages: 5055 - 5065

14. Effect of distribution of fiber volume fraction and resin-rich layer through thickness on stiffness of composite lattice structures

    • Min-Hyeok Jeon
    • In-Gul Kim

    Original Article 05 October 2023 Pages: 5067 - 5079

15. Influence of cryogenic treatment duration of drills on drilling performance and hole quality of metal matrix composite materials

    • Ch Asad Abbas
    • Huang Chuanzhen
    • Liu Hanlian

    Original Article 06 October 2023 Pages: 5081 - 5091

16. Performance estimation of freeze protection system for outdoor fire piping by using AI algorithm

    • Hojoon Cho
    • Sangmin Seo
    • Seongsik Lim

    Original Article 07 October 2023 Pages: 5093 - 5101

17. Reliability analysis and optimization of the hammer rotor of forage crusher under multiple failure modes

    • Zhiping Zhai
    • Donghai Yuan
    • Haixu Zhao

    Original Article 04 October 2023 Pages: 5103 - 5115

18. Numerical study on transient hydraulic excitation force characteristics of a water jet mixed-flow pump during rapid startup period

    • Guitao Zeng
    • Weibin Chen
    • Dazhuan Wu

    Original Article 05 October 2023 Pages: 5117 - 5132

19. FIV response analysis of cylinder with hollow section placed in tandem at the rear of upstream cylinder by numerical simulation

    • Rongjiang Tang
    • Yizhu Zhao
    • Ming Zhao

    Original Article 05 October 2023 Pages: 5133 - 5146

20. A numerical study on particle collection for wavy dielectric plate in 2-stage wire-plate electrostatic precipitator

    • Jae Hyun Park
    • Man Yeong Ha
    • Donggeun Lee

    Original Article 05 October 2023 Pages: 5147 - 5157

21. Numerical simulation of hydrate slurry flow behaviors with micron-sized sand in the transport pipe based on the population balance model

    • Cheng Yu
    • Chuanjun Han
    • Xincan Song

    Original Article 06 October 2023 Pages: 5159 - 5171

22. Unsteady flow simulations for synthetic jets in quiescent air

    • Jaeik Ko
    • Jihyeon Park
    • Minsuk Choi

    Original Article 05 October 2023 Pages: 5173 - 5183

23. Prediction model of stall evolution stages in a centrifugal impeller based on characteristic analysis of the hydraulic torque of blades and support vector machine

    • Luan Shi
    • Zhuqing Liu
    • Ran Tao

    Original Article 05 October 2023 Pages: 5185 - 5198

24. Simultaneous measurement of temperature, concentration, and velocity in the combustion field using TDLAS

    • Jeong-Woong Hong
    • Youngmin Kim
    • Min-Gyu Jeon

    Original Article 06 October 2023 Pages: 5199 - 5206

25. Development of a fast-stabilized fuel injection system using a solenoid actuator

    • Junho Jeong
    • Keunyeong Kim
    • Gisu Park

    Original Article 06 October 2023 Pages: 5207 - 5218

26. Numerical study on photoacoustic conversion in a three-layer structure of polymer layer-metal thin film-polymer layer

    • Sangmo Kang

    Original Article 06 October 2023 Pages: 5219 - 5230

27. Optimizing venous anastomosis angle for arteriovenous graft with intimal hyperplasia using computational fluid dynamics

    • Sangkyun Mok
    • Seongsu Cho
    • Jinkee Lee

    Original Article 05 October 2023 Pages: 5231 - 5238

28. Effects of different constrained boundary structures on the evolution of shock waves and vortexes in muzzle jets

    • Zijie Li
    • Hao Wang
    • Hexia Huang

    Original Article 05 October 2023 Pages: 5239 - 5249

29. Effects of non-uniform inflow on the spatial and temporal distribution of impeller excitation in axial flow pumps in water tunnels

    • Jiansheng Zhang
    • Linlin Cao
    • Dazhuan Wu

    Original Article 05 October 2023 Pages: 5251 - 5262

30. A new approach to geometrically nonlinear analysis of double cable system with a movable guide pulley

    • Jinshuai Xu
    • Zhaohui Qi
    • Lingchong Gao

    Original Article 04 October 2023 Pages: 5263 - 5280

31. Finite element analysis of cross-ply and quasi-isotropic laminate plates with a center hole for variable thickness under transverse loading using shear deformation theories

    • Vivek Kumar Dhimole
    • Pruthvi Serrao
    • Chongdu Cho

    Original Article 06 October 2023 Pages: 5281 - 5296

32. Influence of tooth profile and surface roughness on wear of spur gears considering temperature

    • Chan Il Park

    Original Article 04 October 2023 Pages: 5297 - 5306

33. A double-layer optimization method for forging process parameters of hinge beam structure and size of intermediate billet

    • Guizhong Xie
    • Shixin Zhang
    • Hangqi Jia

    Original Article 05 October 2023 Pages: 5307 - 5319

34. Effects of correction of thermal properties on 3D conjugate heat transfer of aerostatic thrust bearings

    • Liangbin Guo
    • Yongliang Wu

    Original Article 04 October 2023 Pages: 5321 - 5334

35. Study on tool wear for efficient grooving blisk with disc milling cutter

    • Qingsi Cheng
    • Song Wang
    • Guangping Li

    Original Article 05 October 2023 Pages: 5335 - 5348

36. Conceptual design for a multi-rotor UAV based on variable paddle pitch

    • Zhen Qin
    • Xiaoran Tang
    • Yue Wang

    Original Article 06 October 2023 Pages: 5349 - 5361

37. Double-sided collaborative machining for propeller blade based on XYZ-3RPS hybrid kinematic machine

    • Xiangyu Guo
    • Rui Wang
    • Shisheng Zhong

    Original Article 06 October 2023 Pages: 5363 - 5376

38. Kinematic and stiffness modelling and performance evaluation of a new PRS-PRU-PUR overconstrained parallel mechanism

    • Zhen Wu
    • Xinxue Chai
    • Wei Ye

    Original Article 04 October 2023 Pages: 5377 - 5389

39. Gain tuning method of closed-loop-injection low-order feedforward controller considering axis dynamics

    • Chengpeng Zhan
    • Lei Yang
    • Yaolong Chen

    Original Article 05 October 2023 Pages: 5391 - 5398

40. Research on the workspace and analytical stiffness method of a cable-driven robot intended to conduct lower limb rehabilitation therapies

    • Xiangxu Qu
    • Dongxing Cao
    • Yuting Zhang

    Original Article 04 October 2023 Pages: 5399 - 5410

41. Heat transfer and thermal error analysis of micro - macro coaxial driver

    • Hai Shun Deng
    • Yongtao Wang
    • Sen Huang

    Original Article 04 October 2023 Pages: 5411 - 5423

42. Motion of Leidenfrost self-propelled droplets on ratchet in low- and high-temperature regimes

    • Daeseong Jo

    Original Article 05 October 2023 Pages: 5425 - 5430

43. Thermal radiation attenuation performance of fine water spray using twin-fluid nozzles with multiple holes

    • Jae Geun Jo
    • Chi Young Lee

    Original Article 05 October 2023 Pages: 5431 - 5440

44. Modeling of flame transfer function of a diverging premixed flame with developing flame speed under velocity disturbances

    • Ju Hyeong Cho

    Original Article 05 October 2023 Pages: 5441 - 5448

45. Superposition effect of the laidback fan-shaped film cooling hole on a gas turbine vane

    • Ye Rim Jo
    • Jin Young Jeong
    • Jae Su Kwak

    Original Article 05 October 2023 Pages: 5449 - 5461

46. CFD simulation and optimization on airflow uniformity of material drying room used in steam blanching and hot-air vacuum drying equipment

    • Dong Wang
    • Libin Tan
    • Yuming Lu

    Original Article 05 October 2023 Pages: 5463 - 5474

47. Erratum to “Numerical study on the heat transfer characteristics of three-dimensional pulsating heat pipe”

    • Jongmin Jung
    • Yongseok Jeon

    Erratum 05 October 2023 Pages: 5475 - 5475

48. Erratum to “The flow and heat transfer performances of magnetic nanofluid in a duct in presence of magnetic fields with different direction”

    • Cuihua Wang
    • Duo Rong
    • Jianhua Wu

    Erratum 05 October 2023 Pages: 5477 - 5477