1. Limiting the wind-induced deflection amplitude of an overhead conductor: establishment of multi-rigid-body model and optimization of structural parameters

   • Xin Hu
   • Zhangqi Wang
   • Rui Tian

   Original Article 06 July 2022 Pages: 3205 - 3216

2. Modal parameter identification in atmospheric turbulence excitation flutter test based on Hilbert-Huang transform

   • Yang Li
   • Cheng Cheng
   • Li Zhou

   Original Article 06 July 2022 Pages: 3217 - 3226

3. Research on intelligent launching control of dual clutch transmissions based on adaptive neural fuzzy inference system

   • Guodong Zhao
   • Yonggang Liu
   • Zheng Chen

   Original Article 06 July 2022 Pages: 3227 - 3237

4. Simulation of directional drilling by dynamic finite element method

   • Tae Joon Jung
   • Yeon Hwi Jeong
   • Younggy Shin

   Original Article 06 July 2022 Pages: 3239 - 3250

5. The examination principle and the effect of vibration suppression of a rotor system equipped with a skew-mounted automatic ball balancer

   • Chih-Ling Huang
   • Ming-Cheng Wang

   Original Article 06 July 2022 Pages: 3251 - 3262

6. Separation method of rolling bearing compound fault characteristics based on Improved harmonic wavelet packet decomposition and fast ICA

   • Hua Huang
   • Wenhu Xue
   • Qianzhi Pang

   Original Article 02 July 2022 Pages: 3263 - 3276

7. Numerical studies on the dynamic characteristics of a wet multi-disc clutch during the disengaging process

   • Liangjie Zheng
   • Biao Ma
   • Jiaqi Xue

   Original Article 28 May 2022 Pages: 3277 - 3289

8. Evaluation of failure criteria for composite plate under high-velocity impact

   • Yile Zhang
   • Yadong Zhou
   • Zhong Lu

   Original Article 06 July 2022 Pages: 3291 - 3300

9. Kinematic analysis of particle movement in friction barrel-type tribocharger

   • Chifeng Tian
   • Hongshen Zhang
   • Hongfei Zheng

   Original Article 06 July 2022 Pages: 3301 - 3312

10. Active structural acoustic control for radiated sound power reduction of enclosure with vent holes based on radiation modes

    • Onyu Jeon
    • Hyun-Guk Kim
    • Semyung Wang

    Original Article 06 July 2022 Pages: 3313 - 3327

11. Mechanical characteristics and experimental research of a flexible rope-sheave hoisting mechanism

    • Shufeng Tang
    • Renjie Huang
    • Guoqing Zhao

    Original Article 06 July 2022 Pages: 3329 - 3339

12. Fatigue life prediction model of Ti-6Al-4V alloy forgings based on forging process parameters

    • Xiurong Fang
    • Jinhui Yang
    • Ziliang Wang

    Original Article 06 July 2022 Pages: 3341 - 3352

13. Variations of stress and deformation in the straightening process of turnout base plate

    • Hua Zhai
    • Yuanhao Wu
    • Yushan Wang

    Original Article 02 July 2022 Pages: 3353 - 3360

14. A simulation of the comminution process of homogenized lithium-ion battery models

    • Fairuz Alfalah Wibisono
    • Muslim Mahardika
    • Muhammad Akhsin Muflikhun

    Original Article 02 July 2022 Pages: 3361 - 3372

15. A comparative study of mechanical behavior of ABS material based on UVC sterilization for medical usage

    • Mohamed A. Aboamer
    • Doaa H. Elgohary
    • Nader A. Rahman Mohamed

    Original Article 06 July 2022 Pages: 3373 - 3385

16. The experimental and numerical investigation on thermal responses of passive thermal protected batteries in different packs from low to high discharge rates

    • Umit Nazli Temel
    • Ferhat Kilinc

    Original Article 06 July 2022 Pages: 3387 - 3398

17. Prediction of operating reliability of multi-body mechanism in micro-switches considering parameter distribution and wear of parts

    • Donghui Li
    • Xue Zhou
    • Guofu Zhai

    Original Article 06 July 2022 Pages: 3399 - 3407

18. Ductile tearing criteria and failure probability estimation of hydrided Zircaloy-4 cladding under axial loads

    • Belal Almomani
    • SaeHanSol Kang
    • Jae-soo Noh

    Original Article 06 July 2022 Pages: 3409 - 3417

19. High-temperature tensile behavior of diffusion-welded hastelloy X

    • Injin Sah
    • Eung-Seon Kim

    Original Article 02 July 2022 Pages: 3419 - 3428

20. Analysis of EL images on Si solar module under thermal cycling

    • Seungil Park
    • Changwoon Han

    Original Article 06 July 2022 Pages: 3429 - 3436

21. Effect of rotating, non-axisymmetric cavitator on supercavity size

    • Seongmin Kim
    • Jungsoo Lee
    • Jinsoo Cho

    Original Article 06 July 2022 Pages: 3437 - 3447

22. Experimental investigation of surface roughness effect on a free-flight sphere in a Ludwieg tube

    • Seong-Hyeon Park
    • Eunju Kim
    • Ikhyun Kim

    Original Article 13 June 2022 Pages: 3449 - 3456

23. Effect of the opening of a butterfly valve on the dynamic evolution of cavitation

    • Guang Zhang
    • Ze Yong Wu
    • Zhe Lin

    Original Article 02 July 2022 Pages: 3457 - 3467

24. A fluid-structure interaction analysis of design factor of subsurface irrigation PC dripper

    • Woong Bhin Kang
    • Jeongsik Kim
    • Seolha Kim

    Original Article 06 July 2022 Pages: 3469 - 3475

25. Aggregation behavior analysis of hydrate particles in the bend pipe based on the population balance model

    • Cheng Yu
    • Lin Wang
    • Longyao Zhang

    Original Article 06 July 2022 Pages: 3477 - 3486

26. Effect of blade tip pattern on blade load and vibration characteristics of a twin-stage axial flow fan

    • Jiankun Zhang
    • Haihu Liu

    Original Article 06 July 2022 Pages: 3487 - 3500

27. Experimental investigation of low-frequency instabilities of dual-swirl pressure-atomization spray flames

    • Myungho Kim
    • Kyu Tae Kim

    Original Article 02 July 2022 Pages: 3501 - 3508

28. Bi-directional evolutionary 3D topology optimization with a deep neural network

    • Junseok Shin
    • Cheol Kim

    Original Article 06 July 2022 Pages: 3509 - 3519

29. Numerical study of coupling damage between contact fatigue and sliding wear

    • Yutao Yan
    • Xin Wu
    • Cheng Jiang

    Original Article 06 July 2022 Pages: 3521 - 3533

30. Multi-objective optimization of cycloidal gear based on segmental modification of pressure angle

    • Yinghui Zhang
    • JinYong Huang
    • Weidong He

    Original Article 06 July 2022 Pages: 3535 - 3545

31. Multi-objective variable parameter optimization algorithm for spiral bevel gear tooth surface considering meshing efficiency and contact performance

    • Fei Li
    • Sanmin Wang
    • Qi’an Peng

    Original Article 06 July 2022 Pages: 3547 - 3559

32. Particle generation to minimize the computing time of the discrete element method for particle packing simulation

    • Jinsu Nam
    • Jaehee Lyu
    • Junyoung Park

    Original Article 06 July 2022 Pages: 3561 - 3571

33. Time-evolution of electrical resistance-strain hysteresis curve of embroidered stretch sensors and their application in reliable human motion tracking

    • Yuri Cho
    • Giau Thi Nguyen
    • Seung Tae Choi

    Original Article 05 July 2022 Pages: 3573 - 3584

34. Lightweight design of hinge beam based on Kriging agent model

    • Guizhong Xie
    • Shixin Zhang
    • Zeheng Zhi

    Original Article 06 July 2022 Pages: 3585 - 3595

35. Numerical analysis of elastohydrodynamic lubrication characteristics of the spatial cam mechanism in the air splicer

    • Fuqin Yang
    • Dexing Hu
    • Jingwei Jiang

    Original Article 06 July 2022 Pages: 3597 - 3607

36. A helix slope deviation compensation model for milling small modulus copper electrode gears

    • Zhipeng Feng
    • Zhaoyao Shi
    • Guoqing Wu

    Original Article 02 July 2022 Pages: 3609 - 3618

37. Thermal effect of high-velocity particle impingements on coating quality in cold gas dynamic spray operations

    • Si-Jia Dong
    • Jian Ye
    • Tien-Chien Jen

    Original Article 06 July 2022 Pages: 3619 - 3629

38. Experimental study on ultrasonic-assisted grinding of micro-structured surface on silicon carbide using small diameter grinding wheel

    • Hongbo Li
    • Tao Chen
    • Haotian Li

    Original Article 06 July 2022 Pages: 3631 - 3642

39. Tool life evaluation of CFRP drilling with three kinds of drill

    • Xinyi Qiu
    • Pengnan Li
    • Lingyan Tang

    Original Article 05 July 2022 Pages: 3643 - 3651

40. Motion blur processing method for visual SLAM system based on local residual blur discrimination network

    • Jiahao Chen
    • Yehu Shen
    • Jing Miao

    Original Article 06 July 2022 Pages: 3653 - 3666

41. Ridge-following control for agricultural tractors using deep learning and stereo camera

    • Hojun Kang
    • Dongoh Seo
    • Mooncheol Won

    Original Article 02 July 2022 Pages: 3667 - 3675

42. Vibration isolation control performance for an innovative 3-DOF parallel stabilization platform

    • Shuo Jiang
    • Junzheng Wang
    • Wei Shen

    Original Article 02 July 2022 Pages: 3677 - 3689

43. Boiling heat transfer-based temperature rise characteristics of automotive permanent magnet synchronous motors at peak operating conditions

    • He Liange
    • Chen Hongling
    • Shi Wenjun

    Original Article 02 July 2022 Pages: 3691 - 3699

44. Numerical analysis of thermal dynamics and mixing performance in the blade-type static mixers

    • Yanfang Yu
    • Yaxin Chen
    • Jianhua Wu

    Original Article 02 July 2022 Pages: 3701 - 3716

45. Effect of steering wheel heating system on hand thermal sensation

    • Gwi Taek Kim
    • Joo Young Jung

    Original Article 06 July 2022 Pages: 3717 - 3725

46. Thermal management modeling for cylindrical lithium-ion battery packs considering safety and lifespan

    • Peyman Gholamali Zadeh
    • Yijun Wang
    • Jae Dong Chung

    Original Article 06 July 2022 Pages: 3727 - 3733

47. Operating characteristics of a flat evaporator loop heat pipe having a flexible heat transport path

    • Joohyun Lee
    • Wukchul Joung

    Original Article 06 July 2022 Pages: 3735 - 3751

48. Theoretical modelling and simulation analysis of the thermal performance of a steel-basalt fiber polymer concrete machine tool joint surface

    • Jiaxing Shen
    • Zihao Pan
    • Yinghua Yu

    Original Article 06 July 2022 Pages: 3753 - 3765

49. Preload control of the increased outflow of a dual pulsatile extracorporeal membrane oxygenator

    • Chang Young Yoo
    • Seong Min Kang
    • Seong Wook Choi

    Original Article 05 July 2022 Pages: 3767 - 3772

50. Erratum to “Research on feature enhancement method of weak fault signal of rotating machinery based on adaptive stochastic resonance”

    • Kangping Gao
    • Xinxin Xu
    • Ning Shi

    Erratum 13 June 2022 Pages: 3773 - 3774