1. Health management of laser rangefinder considering maximum continuous working time

   • Ying Zeng
   • Hai-Tao Chen
   • Hong-Zhong Huang

   Original Article 03 October 2022 Pages: 4875 - 4883

2. Probabilistic fatigue life prediction of bearings via the generalized polynomial chaos expansion

   • Aodi Yu
   • Yan-Feng Li
   • Qing Diao

   Original Article 03 October 2022 Pages: 4885 - 4894

3. Failure mechanism-based reliability assessment framework: a case study in an automotive component

   • Moonsik Kang
   • Daeil Kwon

   Original Article 03 October 2022 Pages: 4895 - 4903

4. Remaining useful life estimation using accelerated degradation test, a gamma process, and the arrhenius model for nuclear power plants

   • Minkoo Kang
   • Sunjae Lee
   • Sangchul Park

   Original Article 22 September 2022 Pages: 4905 - 4912

5. Design and performance research of a hydro-pneumatic suspension with variable damping and stiffness characteristics

   • Chunfang Yin
   • Xuhui Zhai
   • Pak Kin Wong

   Original Article 03 October 2022 Pages: 4913 - 4923

6. Nonlinear vibration characteristics of accelerating viscoelastic membrane

   • Mingyue Shao
   • Jing Wang
   • Zhicheng Xue

   Original Article 28 September 2022 Pages: 4925 - 4933

7. Sound quality change of the automotive engine noise by variation of engine oil condition

   • Wan-Ho Cho
   • Sung-Hwan Shin
   • Jeong-Guon Ih

   Original Article 03 October 2022 Pages: 4935 - 4942

8. Experimental investigation on a static rollover angle model for commercial vehicle: new measurement method and theoretical model for double rear axle vehicle

   • Yo Han Choi
   • Ken-An Kwon
   • Chul-Hee Lee

   Original Article 03 October 2022 Pages: 4943 - 4951

9. Gear dynamic modelling based on the concept of dynamic mesh stiffness: theoretical study and experimental verification

   • Chongyang Xie
   • Wei Yu

   Original Article 06 October 2022 Pages: 4953 - 4965

10. Adaptive robust control for fully electric pitch system of tank with dynamic friction compensation

    • Darui Lin
    • Xiuye Wang
    • Qinqin Sun

    Original Article 21 September 2022 Pages: 4967 - 4978

11. Fault diagnosis method for rolling bearing based on VMD and improved SVM optimized by METLBO

    • Chao Tan
    • Long Yang
    • Liang Xin

    Original Article 03 October 2022 Pages: 4979 - 4991

12. Tool wear state recognition under imbalanced data based on WGAN-GP and lightweight neural network ShuffleNet

    • Wen Hou
    • Hong Guo
    • Yuan Mao

    Original Article 03 October 2022 Pages: 4993 - 5009

13. A study on the band split of power spectral density for a vibration test

    • Wonho Lee
    • Jinseok Park
    • Jongmin Kim

    Original Article 03 October 2022 Pages: 5011 - 5017

14. Parametric analysis of the damage characterization tests of aluminum bulk material

    • Chaima Hammami
    • Nouha Kammoun
    • Mohamed Haddar

    Original Article 28 September 2022 Pages: 5019 - 5025

15. Nb reinforced Fe-Mn-Si shape memory alloy composite coating fabricated by laser cladding on 304 stainless steel surface

    • Xiaochen Liu
    • Peng Xu
    • Yi Liang

    Original Article 05 October 2022 Pages: 5027 - 5033

16. Numerical simulation of the wall shear stress distribution in a carotid artery bifurcation

    • Marzieh Rezazadeh
    • Ramin Ostadi

    Original Article 05 October 2022 Pages: 5035 - 5046

17. Weak compressibility effects on the pressure fluctuation at RSI in a highspeed centrifugal pump

    • Shaolong Wang
    • Xiaoping Chen
    • Zuchao Zhu

    Original Article 05 October 2022 Pages: 5047 - 5057

18. A multi-factor comprehensive optimization of a supercritical carbon dioxide radial inflow turbine with low specific speed

    • Jinxing Li
    • Dongbo Shi
    • Yonghui Xie

    Original Article 05 October 2022 Pages: 5059 - 5074

19. Investigation of the pressure changes in rocket engine during the impact of a gas jet on bulk-loaded liquid

    • Jian Wang
    • Kun Jiang
    • Hao Wang

    Original Article 05 October 2022 Pages: 5075 - 5086

20. Numerical analysis of nozzle shape effect on fluid motion in LPCVD batch-type furnace

    • Yun Young Ji
    • Dong Kee Sohn
    • Han Seo Ko

    Original Article 05 October 2022 Pages: 5087 - 5095

21. Experimental study and prediction model of the cleaning effect induced by self-resonating cavitating waterjet

    • Yunan Yao
    • Hua Wang
    • Bin Wang

    Original Article 05 October 2022 Pages: 5097 - 5106

22. Investigation on the influence of number of blades on flow-induced noise optimization design of a centrifugal pump

    • Chang Guo
    • Feiran Lv
    • Shen Cheng

    Original Article 28 September 2022 Pages: 5107 - 5116

23. A new mathematical approach to improve residual stress measurement in ring-core method

    • Behnoud Salehebrahimnejad
    • Ali Doniavi
    • Mehrdad Shahbaz

    Original Article 03 October 2022 Pages: 5117 - 5124

24. Damage evaluation and prediction of steel box structures under internal blast

    • Shujian Yao
    • Zhifu Wang
    • Yanjing Wang

    Original Article 03 October 2022 Pages: 5125 - 5133

25. Performance analysis of modular mover hybrid excited flux switching linear machine

    • Basharat Ullah
    • Faisal Khan
    • Zahoor Ahmad

    Original Article 05 October 2022 Pages: 5135 - 5141

26. An alternative testing method to investigate creep-dominant creep-fatigue interaction and its application on modified 9Cr-1Mo steel

    • Uijeong Ro
    • Jeong Hwan Kim
    • Moon Ki Kim

    Original Article 28 September 2022 Pages: 5143 - 5151

27. Step-size adaptive parametric level set method for structural topology optimization

    • Chen-Dong Yang
    • Jian-Hu Feng
    • Ya-Dong Shen

    Original Article 03 October 2022 Pages: 5153 - 5164

28. Meshing principle and characteristics analysis of an abnormal cycloidal internal gear transmission

    • Jingyu Mo
    • Shanming Luo
    • Xuefeng Chang

    Original Article 05 October 2022 Pages: 5165 - 5179

29. Translocation of charged particles through a thin micropore under pressure-driven flow

    • Junsang Moon
    • Chang Woo Song
    • Chang-Soo Han

    Original Article 05 October 2022 Pages: 5181 - 5189

30. Molecular-resolution micro-resonant biosensor with adjustable natural frequency

    • Xiaorui Fu
    • Ming Zhang
    • Chong Li

    Original Article 28 September 2022 Pages: 5191 - 5199

31. Effect of weld geometry on fatigue performance of 6061-T6 aluminum GMAW: part 1. Butt joint

    • Sang-Woo Han
    • Geonho Lee
    • Jungho Cho

    Original Article 03 October 2022 Pages: 5201 - 5208

32. Effect of weld geometry on fatigue performance of 6061-T6 aluminum GMAW: part 2. Lap joint

    • Sang-Woo Han
    • Geonho Lee
    • Jungho Cho

    Original Article 05 October 2022 Pages: 5209 - 5214

33. Effect of weld geometry on fatigue performance of 6061-T6 aluminum GMAW: part 3. T-fillet joint

    • Sang Woo Han
    • Geonho Lee
    • Jungho Cho

    Original Article 03 October 2022 Pages: 5215 - 5221

34. A study of surface quality and mechanical strength in 5083 aluminum alloy plates using pulsed laser cleaning

    • Ji Lin
    • Chunming Wang

    Original Article 03 October 2022 Pages: 5223 - 5229

35. A fuzzy-based impedance control for force tracking in unknown environment

    • Yichao Shen
    • Yan Lu
    • Chungang Zhuang

    Original Article 05 October 2022 Pages: 5231 - 5242

36. Hydrogen production from acid- and ammonia-pretreated biomass

    • Min Jong Ku
    • Dae Gyun Lee
    • Chung Hwan Jeon

    Original Article 28 September 2022 Pages: 5243 - 5251

37. Study of the heat transfer performance of gravity heat pipes based on lattice Boltzmann surface modification

    • Hongren Zhan
    • Shuai Li
    • Zhigang Zhang

    Original Article 05 October 2022 Pages: 5253 - 5266

38. Comparison of optimized roughness parameters of some artificially roughened solar air heaters

    • Cihan Yıldırım
    • Ibrahim Aydoǧdu

    Original Article 05 October 2022 Pages: 5267 - 5280

39. Heat transfer of a sustainable personal garment cooling system

    • Yijie Zhang
    • Ziyi Guo
    • Fengyuan Zou

    Original Article 05 October 2022 Pages: 5281 - 5290

40. Numerical investigation on Rayleigh-Bénard-Marangoni flow of water near the maximum density in cylindrical pools with large aspect ratios

    • Dong-Ming Mo
    • Liu-Zhu Cao
    • You-Rong Li

    Original Article 05 October 2022 Pages: 5291 - 5298

41. Performance analysis of PVT systems applicable to apartment housing structures: experiment and simulation

    • Hongjie Piao
    • Hakan Caliskan
    • Hiki Hong

    Original Article 03 October 2022 Pages: 5299 - 5307

42. Design and experimental testing of a tactile sensor for self-compensation of contact error in soft tissue stiffness measurement

    • Frank Efe Erukainure
    • Victor Parque
    • Ahmed M. R. FathEl-Bab

    Original Article 21 September 2022 Pages: 5309 - 5324