1. Calculation of coupled added mass of multibody system immersed in fluids

   • Jin Haeng Lee
   • Jae-Hun Cho
   • Sung-Kyun Kim

   Original Article 22 July 2021 Pages: 3781 - 3792

2. Quantitative study on area fraction of precipitated carbides of HP40Nb steel as a function of service period

   • Hyo Jung Bang
   • Thi Giang Le
   • Kee Bong Yoon

   Original Article 22 July 2021 Pages: 3793 - 3801

3. Effects of processing parameters on creep behavior of 316L stainless steel produced using selective laser melting

   • Jae Hyeon Bae
   • Jong Min Yu
   • Kee Bong Yoon

   Original Article 22 July 2021 Pages: 3803 - 3812

4. Structural analysis of spinner for glass wool fabrication by axial angle variation of outlet

   • Kwan-Yong Jeong
   • Sang-Young Kim

   Original Article 22 July 2021 Pages: 3813 - 3819

5. Integrity assessment of spent fuel assembly in vertically and obliquely dropping cask

   • SaeHanSol Kang
   • Dong-Hyun Kim
   • SangHwan Lee

   Original Article 22 July 2021 Pages: 3821 - 3827

6. Hydrogen gaseous effects on fracture resistance of API-X70 estimated by XFEM

   • Dong-Hyun Kim
   • Jae Min Sim
   • Un Bong Baek

   Original Article 22 July 2021 Pages: 3829 - 3835

7. Mechanical and fracture properties of poly(ethylene terephthalate) with glycol/carbon nanotube nanocomposite films under accelerated weathering conditions

   • Min-Seok Choi
   • Jin Hyoung Lee
   • Byoung-Ho Choi

   Original Article 22 July 2021 Pages: 3837 - 3845

8. Novel specimen for the effective measurement of the fracture strain along with stress triaxiality and Lode parameter

   • Seok Woo Ham
   • Jae Ung Cho
   • Seong S. Cheon

   Original Article 22 July 2021 Pages: 3847 - 3854

9. Evaluation of fatigue limit and harmless crack size of needle peened offshore structure steel F690

   • Min-Heon Kim
   • Won-Gu Lee
   • Ki-Woo Nam

   Original Article 28 August 2021 Pages: 3855 - 3862

10. Lamb wave propagation on a unidirectional CFRP plate: comparison of FEM simulations, experiments, and analytical calculations

    • Joonseo Song
    • Subin Kim
    • Young H. Kim

    Original Article 01 September 2021 Pages: 3863 - 3869

11. Spatial synchronization behavior of vibration system with tri-motor excitation

    • Pan Fang
    • Shuangquan Shi
    • Zhiliang Zhang

    Original Article 28 August 2021 Pages: 3871 - 3885

12. Optimal design of vibration-isolation systems by means of a numerical simulation

    • Igor Maciejewski
    • Mariusz Zlobinski
    • Tomasz Krzyzynski

    Original Article 28 August 2021 Pages: 3887 - 3894

13. Static and dynamic nonlinear stability analyses of hybrid sandwich composite beams under variable in-plane loads

    • Achchhe Lal
    • Kanif Markad

    Original Article 01 September 2021 Pages: 3895 - 3908

14. Calculation method of radial displacement in the engaging process of wet friction clutch

    • Heyun Bao
    • Xiang Li
    • Wei Huang

    Original Article 28 August 2021 Pages: 3909 - 3918

15. Fabrication of transparent homogeneous functionally graded materials and crack analysis by photoelasticity

    • Kwang Ho Lee
    • Bum Su Kim
    • Ji Sik Kim

    Original Article 01 September 2021 Pages: 3919 - 3929

16. Preliminary study on a composite steel slit damper

    • Jinkyu Kim
    • Min-Cheol Kim
    • Dong-Keon Kim

    Original Article 28 August 2021 Pages: 3931 - 3942

17. Influence of cleaning modes on the microstructure and performance of 5083 alloy substrate

    • Yunkai Li
    • Chunming Wang
    • Gaoyang Mi

    Original Article 28 August 2021 Pages: 3943 - 3949

18. Cutting tool performance analysis of P/M alloy steel under turning of copper material

    • T. Panneerselvam
    • T. K. Kandavel
    • K. S. Tarun

    Original Article 28 August 2021 Pages: 3951 - 3958

19. Experimental study on mechanical behaviors of injection molded PC/PMMA blends

    • Van Thanh Hoang
    • Quang Bang Tao
    • Duc Binh Luu

    Original Article 01 September 2021 Pages: 3959 - 3966

20. Study on shaped charge cutting of carbon-fiber-reinforced epoxy resin-based composite laminate under prestressing force

    • Meng Wang
    • Zhijie He
    • Haijun Xuan

    Original Article 28 August 2021 Pages: 3967 - 3977

21. Engineering design and analysis of flow distribution in multiple flow circuits with partial contractions

    • Ju Hyeong Cho

    Original Article 01 September 2021 Pages: 3979 - 3987

22. A novel optimization approach for axial turbine blade cascade via combination of a continuous-curvature parameterization method and genetic algorithm

    • Mehrdad Nafar-Sefiddashti
    • Mahdi Nili-Ahmadabadi
    • Kyung Chun Kim

    Original Article 28 August 2021 Pages: 3989 - 4000

23. Effects of a moving weir on tundish flow during continuous-casting grade-transition

    • Soohwan Jeon
    • Sangseung Lee
    • Donghyun You

    Original Article 28 August 2021 Pages: 4001 - 4009

24. Interactions of a short-pulsed plane acoustic wave with complex rigid objects: a numerical study

    • Sangmo Kang

    Original Article 28 August 2021 Pages: 4011 - 4022

25. Development of interpolation-free PTV

    • Min-Gyu Jeon
    • Deog-Hee Doh
    • Gyeong-Rae Cho

    Original Article 28 August 2021 Pages: 4023 - 4032

26. Thermocapillary migration of a fluid compound droplet

    • Vinh T. Nguyen
    • Truong V. Vu
    • Hung V. Vu

    Original Article 28 August 2021 Pages: 4033 - 4044

27. Deep particulate matter forecasting model using correntropy-induced loss

    • Jongsu Kim
    • Changhoon Lee

    Original Article 28 August 2021 Pages: 4045 - 4063

28. Experiment and computation multi-fidelity multi-objective airfoil design optimization of fixed-wing UAV

    • Tharathep Phiboon
    • Krittin Khankwa
    • Atthaphon Ariyarit

    Original Article 28 August 2021 Pages: 4065 - 4072

29. Time-varying meshing stiffness calculation of an internal gear pair with small tooth number difference by considering the multi-tooth contact problem

    • Guangjian Wang
    • Qing Luo
    • Shuaidong Zou

    Original Article 01 September 2021 Pages: 4073 - 4083

30. Study on the detailed and homogenized models for functionally graded carbon nanotube-reinforced composite beams

    • Huiseop Jeong
    • Jin-Rae Cho

    Original Article 28 August 2021 Pages: 4085 - 4092

31. Artillery structural dynamic responses uncertain optimization based on robust Nash game method

    • Fengjie Xu
    • Guolai Yang
    • Liqun Wang

    Original Article 28 August 2021 Pages: 4093 - 4104

32. Optimization of laminated composite structures under nonlinear dynamic loading using the equivalent static load method

    • Yijae Choi
    • Jaemin Moon
    • Chang-Wan Kim

    Original Article 28 August 2021 Pages: 4105 - 4113

33. Augmented reality assisted facility layout digitization and planning

    • Chee Hau Tan
    • Hwa Jen Yap
    • Luqman Hakim Baharudin

    Original Article 28 August 2021 Pages: 4115 - 4123

34. A contact model for electrical contact resistance between a rigid plane and a cylindrical surface

    • Yulian Jiang
    • Yangzhen Gao
    • Zhiguo Feng

    Original Article 28 August 2021 Pages: 4125 - 4134

35. Economic evaluation and machining performance in Ti-6Al-4V titanium alloy milling by integrated CO₂ & MQL injection system

    • Seok-Jae Ha
    • Dong-Wook Lim
    • Ki-Hyeok Song

    Original Article 28 August 2021 Pages: 4135 - 4142

36. Machining of brittle materials: micro milling of glass

    • Ali Mamedov

    Original Article 28 August 2021 Pages: 4143 - 4148

37. Optimal torso design selection for dual 7-DOF robot arm using von Mises stress and workspace analysis

    • Hamza Khan
    • Saad Jamshed Abbasi
    • Min Cheol Lee

    Original Article 01 September 2021 Pages: 4149 - 4159

38. Stochastic fixed-time synchronization of chaotic systems via smooth control

    • Jie Wu
    • Xiaofeng Wang
    • Ru-ru Ma

    Original Article 01 September 2021 Pages: 4161 - 4168

39. Parameter design method for the heat transfer performance of a fan-driven gearbox under planetary gear opening and oil-return conditions

    • Fengxia Lu
    • Lijuan Yuan
    • Heyun Bao

    Original Article 26 July 2021 Pages: 4169 - 4178

40. Design of a supersonic turbine for the organic Rankine cycle system

    • J. Seo
    • Bum-Seog Choi
    • S. Han

    Original Article 28 August 2021 Pages: 4179 - 4192

41. Experimental study on U-shape flat thermosyphon for thermal management of power battery

    • Tao Wang
    • Sicong Tan
    • Yuyan Jiang

    Original Article 28 August 2021 Pages: 4193 - 4200

42. Influencing factors on thermal comfort and biosignals of occupant-a review

    • Yeonghun Kim
    • Yunchan Shin
    • Honghyun Cho

    Original Article 01 September 2021 Pages: 4201 - 4224

43. Refrigerant distribution in an evaporator having a horizontal header and horizontal mini-channel tubes

    • Cheol-Hwan Kim
    • Nae-Hyun Kim

    Original Article 28 August 2021 Pages: 4225 - 4237

44. Packaging effects on the sensing performance of RTDs on an AlN substrate of a wafer heater

    • Nico Setiawan Effendi
    • Kyoung Joon Kim

    Original Article 28 August 2021 Pages: 4239 - 4246

45. Numerical investigation of dual-fuel direct injection on RCCI combustion performance at low load condition

    • Peng Jiang
    • Xu Liu
    • Zhixia He

    Original Article 28 August 2021 Pages: 4247 - 4259

46. In-situ measurement of reflection coefficient and its application to predicting combustion instability in a gas turbine combustor

    • Won Joon Song
    • Gyu Seong Youn
    • Dong Jin Cha

    Original Article 01 September 2021 Pages: 4261 - 4270

47. Continuum-based modeling of collective cell migration

    • Hyungmin Jun
    • Hwanseok Jang
    • Eun Bo Shim

    Original Article 28 August 2021 Pages: 4271 - 4277