1. Review of the binary mixture droplet evaporation studies

   • Chan Ho Jeong
   • Hyung Ju Lee
   • Seong Hyuk Lee

   Invited Review Article 08 December 2021 Pages: 5259 - 5272

2. Evaluating the influence of a high-fidelity generator model on the gearbox dynamic responses of wind turbines

   • Yunpeng Zhou
   • Chengwu Lee

   Original Article 08 December 2021 Pages: 5273 - 5285

3. A novel adaptive model following controller to enhance steering and roll stability of heavy vehicle

   • Yongjie Lu
   • Junning Zhang
   • Yinfeng Han

   Original Article 08 December 2021 Pages: 5287 - 5297

4. An effective residual life prediction method of rolling element bearings based on degradation trajectory analysis

   • Sifang Zhao
   • Qiang Song
   • Mingsheng Wang

   Original Article 08 December 2021 Pages: 5299 - 5307

5. Synthesis approach of multiaxial vibration test profile for non-gaussian excitation

   • Shuo Dou
   • Zhiming Liu
   • Liyong Mao

   Original Article 08 December 2021 Pages: 5309 - 5321

6. Predictive maintenance of abnormal wind turbine events by using machine learning based on condition monitoring for anomaly detection

   • Huan Chen
   • Jyh-Yih Hsu
   • Yu-Ju Lin

   Original Article 08 December 2021 Pages: 5323 - 5333

7. Parametric study on nonlinear dynamic characteristics of functionally graded graphene nanoplatelets reinforced composite plates

   • Wen-xing Lu
   • Jian-en Chen
   • Jun Liu

   Original Article 08 December 2021 Pages: 5335 - 5349

8. Mathematical modeling and nonlinear analysis of stiffness of double wishbone independent suspension

   • Bao Zhang
   • Zhi Li

   Original Article 08 December 2021 Pages: 5351 - 5357

9. Analysis of running depth and study of combined tubing of drill-grinding string in horizontal wells

   • Wenkang Chen
   • Chuanjun Han
   • Liangliang Ding

   Original Article 08 December 2021 Pages: 5359 - 5370

10. Data-driven prognostics method for turbofan engine degradation using hybrid deep neural network

    • Bin Xue
    • Zhong-bin Xu
    • Peng-cheng Nie

    Original Article 08 December 2021 Pages: 5371 - 5387

11. Formability evaluation of sheet metal forming on advanced high-strength steel via an integrative experimental-theoretical approach based on localized necking and fracture limits

    • Sansot Panich
    • Komkamol Chongbunwatana
    • Tanakorn Jantarasricha

    Original Article 08 December 2021 Pages: 5389 - 5404

12. Viscoplastic behavior of AA7075 aluminum alloy at high strain rate

    • Keguo Zhang
    • Yang Cao
    • Keyi Wang

    Original Article 08 December 2021 Pages: 5405 - 5413

13. Development of improved Manson-Coffin model considering the effect of yield stress under asymmetrical cyclic loading

    • Qipeng Liu
    • Guanglong Jiang
    • Yonghua Li

    Original Article 08 December 2021 Pages: 5415 - 5424

14. Low velocity impact resistance of ceramic/polyurea composite plates: experimental study

    • Yihua Xiao
    • Ziqiang Tang
    • Xiangfu Hong

    Original Article 08 December 2021 Pages: 5425 - 5434

15. Polymerization shrinkage and stress analysis during dental restoration observed by digital image correlation method

    • Jung-Hoon Park
    • Nak-Sam Choi

    Original Article 08 December 2021 Pages: 5435 - 5444

16. A case study on safety integrity level analysis for shale gas station

    • Yuan-Jian Yang
    • Chao Huang
    • Hong-Zhong Huang

    Original Article 08 December 2021 Pages: 5445 - 5452

17. Rapid warning of wind turbine blade icing based on MIV-tSNE-RNN

    • Zhiqiang Zhang
    • Bin Fan
    • Wenliang Du

    Original Article 10 December 2021 Pages: 5453 - 5459

18. Effect of additive cashew grain size on brake performance of non-asbestos linings

    • Faruk Karaca
    • İlhan Can

    Original Article 08 December 2021 Pages: 5461 - 5468

19. Mechanical and corrosion resistant properties of ATIG welded 2205 duplex stainless-steel via different fluxes

    • Hussein Alrobei
    • Kamel Touileb
    • El-Sayed M. Sherif

    Original Article 10 December 2021 Pages: 5469 - 5476

20. Nonlinear fatigue life prediction models based on material damage state correction

    • Bowen Wang
    • Qiwen Xue

    Original Article 08 December 2021 Pages: 5477 - 5487

21. Vacuum-assisted piezoelectric cantilever mass sensor performance

    • Shivanku Chauhan
    • Mohd. Zahid Ansari

    Original Article 08 December 2021 Pages: 5489 - 5494

22. Gradient folding metasurfaces with simultaneous phase and amplitude modulation

    • Zibin Lin
    • Weikai Xu
    • Shasha Yuan

    Original Article 08 December 2021 Pages: 5495 - 5501

23. Ultrasonic atomization of highly viscous biodegradable oils for MQL applications

    • Axel Lefebure
    • Dongha Shim

    Original Article 08 December 2021 Pages: 5503 - 5516

24. Suction performance improvement of an annular jet pump by J-groove passage shape optimization

    • Ujjwal Shrestha
    • Young-Do Choi

    Original Article 08 December 2021 Pages: 5517 - 5527

25. Design and analysis of one-degree statically indeterminate hydraulic support

    • Xiangpeng Hu
    • Xinhua Liu

    Original Article 10 December 2021 Pages: 5529 - 5539

26. Detection of surface roughness of mechanical drawings with deep learning

    • Hao Hu
    • Chao Zhang
    • Yanxue Liang

    Original Article 08 December 2021 Pages: 5541 - 5549

27. Reconstruction of primitive-shaped pipe elbows from a triangular mesh in ship outfitting model

    • Gun-Yeol Na
    • Jeongsam Yang
    • Sanguk Cheon

    Original Article 08 December 2021 Pages: 5551 - 5560

28. Experimental evaluation of different spectral methods for damage estimation of an electrical panel bracket mounted on a military wheeled vehicle

    • Mehmet Sefa Gümüş
    • Abdullah Erdemir
    • Mete Kalyoncu

    Original Article 08 December 2021 Pages: 5561 - 5569

29. Compound motion characteristics analysis of eccentric herringbone curve-face gear pair

    • Chao Lin
    • Gui Ran
    • Yanan Hu

    Original Article 08 December 2021 Pages: 5571 - 5578

30. Influences of rubber cushion and bearing position on the mesh characteristics of small-module spiral bevel gear

    • Maohao Xia
    • Chaosheng Song
    • Peitang Wei

    Original Article 08 December 2021 Pages: 5579 - 5589

31. Nonlinear bending and free vibration analyses of metal-ceramic functionally graded plates by 2-D natural element method

    • Jin-Rae Cho

    Original Article 08 December 2021 Pages: 5591 - 5599

32. Reliability-based design of reflector antennas with integrated structural-electromagnetic analysis using adaptive kriging modeling

    • Naigang Hu
    • Wanye Xu

    Original Article 10 December 2021 Pages: 5601 - 5610

33. Multiphysics design and analysis of an impeller-type superfine grinding turbulence mill driven by a high-speed permanent magnet machine

    • Mengzi Zheng
    • Fuxian Wu
    • Suoli Liu

    Original Article 08 December 2021 Pages: 5611 - 5620

34. Assessment of positional error and hole quality during vibration-based drilling of aerospace alloy

    • Malkeet Singh
    • Sahil Dhiman
    • Christopher Charles Berndt

    Original Article 08 December 2021 Pages: 5621 - 5630

35. Effect of burrs on the friction performance of hierarchical micro-dimple textured AISI 1045 steel

    • Gun Chul Park
    • Saood Ali
    • Tae Jo Ko

    Original Article 10 December 2021 Pages: 5631 - 5642

36. Study on design and processing performance verification of a 600 dpi f-theta lens

    • Yong-Woo Park
    • Zhen Qin
    • Sung-Ki Lyu

    Original Article 08 December 2021 Pages: 5643 - 5653

37. Framework of integrating trajectory replanning with tracking for self-driving cars

    • Jin-kai Yin
    • Wei-ping Fu

    Original Article 08 December 2021 Pages: 5655 - 5663

38. Speed control strategy for pump-motor hydraulic transmission subsystem in hydro-mechanical continuously variable transmission

    • Xiaozhao Wei
    • Lei Wang
    • Shen Li

    Original Article 10 December 2021 Pages: 5665 - 5679

39. A new structure of sliding mode observer in dynamic sliding mode control of generator torque wind turbine

    • Ali Karami-Mollaee

    Original Article 08 December 2021 Pages: 5681 - 5687

40. Cooperative compliance control of the dual-arm manipulators with elastic joints

    • Xin Jing
    • Haibo Gao
    • Zhengsheng Chen

    Original Article 08 December 2021 Pages: 5689 - 5697

41. Study on optimal control strategy for regulated two-stage turbocharged diesel engine during transient process

    • Huiyan Zhang
    • Xuyang Tang
    • Kangyao Deng

    Original Article 08 December 2021 Pages: 5699 - 5712

42. Experimental study of desorption and regeneration analysis of cylindrical desiccant layer arrangements

    • P. Balthazar
    • M. A. Ismail
    • K. H. Yu

    Original Article 08 December 2021 Pages: 5713 - 5722

43. New design of a hot mixing chamber for lowering its surface temperature by adopting a perforated inner cylinder

    • Tu Thien Ngo
    • Tianjun Zhou
    • Geun Sik Lee

    Original Article 08 December 2021 Pages: 5723 - 5731

44. Method to evaluate heat leakage of vertical cryogenic vessels at different liquid levels

    • Zheng-qing Li
    • Sheng-sheng Yang
    • Xiao-xia Li

    Original Article 08 December 2021 Pages: 5733 - 5739

45. Fuel injection rate and its variation of a GDI injector operated in engine motoring conditions

    • Byoung Jin Lee
    • Choong Hoon Lee

    Original Article 08 December 2021 Pages: 5741 - 5751

46. Performance analysis of hybrid microchannel heat sink for varying nozzle geometry and layout on the basis of first- and second-law of thermodynamics

    • Jyoti Pandey
    • Mohd. Zahid Ansari
    • Afzal Husain

    Original Article 08 December 2021 Pages: 5753 - 5764

47. Experimental study on the thermal performance of a KNO₂-KNO₃ mixture in a trapezoidal solar pond

    • P. Dineshkumar
    • M. Raja

    Original Article 08 December 2021 Pages: 5765 - 5772

48. Experimental study of a micro-scale sloped solar chimney power plant

    • Muhammed Huseyin Guzel
    • Recep Emre Unal
    • Faruk Kose

    Original Article 10 December 2021 Pages: 5773 - 5779

49. Design of directional stiffness catheter for enhancing target accessibility

    • Jajun Ryu
    • Jung Hwan Ahn
    • Hwa Young Kim

    Original Article 10 December 2021 Pages: 5781 - 5786