1. Fracture property of double cantilever beam of aluminum foam bonded with spray adhesive

   • Moon Sik Han
   • Hae Kyu Choi
   • Chong Du Cho

   OriginalPaper 15 January 2015 Pages: 5 - 10

2. Experimental and numerical investigation on hypervelocity impact response of 2D plain-woven C/SiC composite

   • Yang Yang
   • Fei Xu

   OriginalPaper 15 January 2015 Pages: 11 - 16

3. AE analysis of delamination crack propagation in carbon fiber-reinforced polymer materials

   • Sang-Jae Yoon
   • Dingding Chen
   • Kazuo Arakawa

   OriginalPaper 15 January 2015 Pages: 17 - 21

4. Fretting fatigue behavior in railway axle materials

   • Sung Jong Choi
   • Young Tae Cho

   OriginalPaper 15 January 2015 Pages: 23 - 31

5. Experimental investigation on the essential work of mixed-mode fracture of PC/ABS alloy

   • Huimin Li
   • Guiping Jiang
   • Tiejun Wang

   OriginalPaper 15 January 2015 Pages: 33 - 38

6. Real-time detection of surface cracks on silicon wafers during laser beam irradiation

   • Sungho Choi
   • Sung-Hee Yoon
   • Wan-Soon Shin

   OriginalPaper 15 January 2015 Pages: 39 - 43

7. Study on crack propagation of adhesively bonded DCB for aluminum foam using energy release rate

   • Hyejin Bang
   • Sang-kyo Lee
   • Jae Ung Cho

   OriginalPaper 15 January 2015 Pages: 45 - 50

8. Fatigue characteristics of dual-phase steel sheets

   • Irwan Herman Onn
   • Norhayati Ahmad
   • Mohd Nasir Tamin

   OriginalPaper 15 January 2015 Pages: 51 - 57

9. Transmission loss of orthogonally stiffened laminated composite plates

   • Cheng Shen
   • Fengxian Xin
   • Tianjian Lu

   OriginalPaper 15 January 2015 Pages: 59 - 66

10. Fatigue life prediction method for contact wire using maximum local stress

    • Yongseok Kim
    • Kiwon Lee
    • Yong Hyeon Cho

    OriginalPaper 15 January 2015 Pages: 67 - 70

11. A three-dimensional statistical damage constitutive model for geomaterials

    • Hangzhou Li
    • Hongjian Liao
    • Guiping Zhao

    OriginalPaper 15 January 2015 Pages: 71 - 77

12. The prediction of dynamic fatigue life of multi-axial loaded system

    • Moonyoung Yoon
    • Kyeungho Kim
    • Heungseob Kim

    OriginalPaper 15 January 2015 Pages: 79 - 83

13. Analysis of large concrete storage tank under seismic response

    • Jingyuan Li
    • Xiaochuan You
    • Jinsan Ju

    OriginalPaper 15 January 2015 Pages: 85 - 91

14. Fabrication of omni-directional driving system using unconstrained steel ball

    • Hyunseok Lee
    • Yeongmin Na
    • Jongkyu Park

    OriginalPaper 15 January 2015 Pages: 93 - 97

15. Residual stress and electromagnetic characteristics in loop type frequency selective surface embedded hybrid structures

    • Kyung-Mi Park
    • Yun-Seok Seo
    • Yoon-Jae Kim

    OriginalPaper 15 January 2015 Pages: 99 - 102

16. Mechanical properties of CO₂/MIG welded structural rolled steel and stainless steel

    • Jong Young Lim
    • Myong Jin Yoon
    • Tae Gyu Kim

    OriginalPaper 15 January 2015 Pages: 103 - 108

17. Electric field induced variation of temperature and entropy in dielectric elastomers

    • Liwu Liu
    • Jinrong Li
    • Jianwen Zhao

    OriginalPaper 15 January 2015 Pages: 109 - 114

18. A study on perforation prediction of metal targets by cylindrical tungsten penetrator

    • Sangwon Lee
    • Taeho Yang
    • Youngwoon Bae

    OriginalPaper 15 January 2015 Pages: 115 - 120

19. Effects of microstructure on material properties of modified 9Cr-1Mo steel subject to creep-fatigue

    • Mayu Muramatsu
    • Takayuki Suzuki
    • Yuji Nakasone

    OriginalPaper 15 January 2015 Pages: 121 - 129

20. Investigation on aerodynamic instability of high-voltage transmission lines under rain-wind condition

    • Chao Zhou
    • Yibing Liu
    • Zhiyong Ma

    OriginalPaper 15 January 2015 Pages: 131 - 139

21. Prediction of the aeromechanics for HART II rotor in descending flight using mixed variational geometrically exact beam analysis

    • Han-Yeol Ryu
    • Sang-Joon Shin

    OriginalPaper 15 January 2015 Pages: 141 - 150

22. Support vector machine based estimation of remaining useful life: current research status and future trends

    • Hong-Zhong Huang
    • Hai-Kun Wang
    • Zhiliang Liu

    OriginalPaper 15 January 2015 Pages: 151 - 163

23. Numerical simulation of the transient ultrasonic wave reflection at a liquid-solid interface

    • Nadir Maghlaoui
    • Hakim Djelouah
    • Djema Belgroune

    OriginalPaper 15 January 2015 Pages: 165 - 172

24. Dynamic performance analysis of high speed flexible coupling of gas turbine engine transmission system

    • S. Nagesh
    • A. M. Junaid Basha
    • Thakur Dinesh Singh

    OriginalPaper 15 January 2015 Pages: 173 - 179

25. Vibration and noise source identification methods for a diesel engine

    • Jiaxin Xi
    • Zengming Feng
    • Fei Wang

    OriginalPaper 15 January 2015 Pages: 181 - 189

26. Modeling and control of lateral vibration of an axially translating flexible link

    • Heonseop Shin
    • Sungsoo Rhim

    OriginalPaper 15 January 2015 Pages: 191 - 198

27. Damage detection in composite under in-plane load using tap test

    • Sung Joon Kim

    OriginalPaper 15 January 2015 Pages: 199 - 207

28. Microstructural control of hot rolled strips and their tensile strengths after hot stamping process

    • Won Ha
    • Chang-Hoon Lee
    • Cheol Jae Park

    OriginalPaper 15 January 2015 Pages: 209 - 213

29. Design techniques to improve the performance of a centrifugal pump using CFD

    • Joon-Hyung Kim
    • Him-Chan Lee
    • Young-Seok Choi

    OriginalPaper 15 January 2015 Pages: 215 - 225

30. High performance hydraulic design techniques of mixed-flow pump impeller and diffuser

    • Sung Kim
    • Kyoung-Yong Lee
    • Young-Seok Choi

    OriginalPaper 15 January 2015 Pages: 227 - 240

31. Effect of gas temperature on flow rate characteristics of an averaging pitot tube type flow meter

    • Seung Hwa Yeo
    • Su Ryong Lee
    • Choong Hoon Lee

    OriginalPaper 15 January 2015 Pages: 241 - 249

32. Effect of guide vanes on recovering uniform flow in a ventilation duct in an existing twin-track subway tunnel

    • Makhsuda Juraeva
    • Kyung Jin Ryu
    • Dong Joo Song

    OriginalPaper 15 January 2015 Pages: 251 - 258

33. Numerical and experimental investigations on the cavitation characteristics of a high-speed centrifugal pump with a splitter-blade inducer

    • XiaoMei Guo
    • Linhang Zhu
    • Yi Li

    OriginalPaper 15 January 2015 Pages: 259 - 267

34. Two-step design process for optimal suction muffler in reciprocating compressor

    • Kee Seung Oh
    • Jin Woo Lee

    OriginalPaper 15 January 2015 Pages: 269 - 278

35. Robust estimation of support vector regression via residual bootstrap adoption

    • Won-Young Choi
    • Dong-Hoon Choi
    • Kyung-Joon Cha

    OriginalPaper 15 January 2015 Pages: 279 - 289

36. Fatigue life of stainless steel 304 enhancement by addition of multi-walled carbon nanotubes (MWCNTs)

    • Rizwanulhaque Syed
    • Wei Jiang
    • M. Iqbal Sabir

    OriginalPaper 15 January 2015 Pages: 291 - 296

37. P1-Nonconforming shell element and its application to topology optimization

    • Chen Lei
    • Tae Hyun Baek
    • Gang-Won Jang

    OriginalPaper 15 January 2015 Pages: 297 - 308

38. Load sharing and distributed on the gear flank of wind turbine planetary gearbox

    • Young-Jun Park
    • Jeong-Gil Kim
    • Sung Bo Shim

    OriginalPaper 15 January 2015 Pages: 309 - 316

39. Reducing particle loss in a critical orifice and an aerodynamic lens for focusing aerosol particles in a wide size range of 30 nm — 10 μm

    • Tae-Hyun Hwang
    • Seok-Hwan Kim
    • Donggeun Lee

    OriginalPaper 15 January 2015 Pages: 317 - 323

40. Size-dependent dynamic stability analysis of microbeams actuated by piezoelectric voltage based on strain gradient elasticity theory

    • Saeid Sahmani
    • Mohsen Bahrami

    OriginalPaper 15 January 2015 Pages: 325 - 333

41. Influence of repetitive pulsed laser irradiation on the surface characteristics of an aluminum alloy in the melting regime

    • Sungho Choi
    • Kyung-Young Jhang

    OriginalPaper 15 January 2015 Pages: 335 - 340

42. 3-D numerical evaluation of residual stress and deformation due welding process using simplified heat source models

    • Amir Hossein Eslampanah
    • Mohammad Ebrahim Aalami-aleagha
    • Mohammad Reza Ghaderi

    OriginalPaper 15 January 2015 Pages: 341 - 348

43. Study of energy distribution to electrodes in a micro-EDM process by utilizing the electro-thermal model of single discharges

    • Kien Trung Hoang
    • Satish Kumar Gopalan
    • Seung-Han Yang

    OriginalPaper 15 January 2015 Pages: 349 - 356

44. The application of imperialist competitive algorithm for optimization of deposition rate in submerged arc welding process using TiO₂ nano particle

    • Mohammad Reza Ghaderi
    • Masood Aghakhani
    • Kianoosh Ghaderi

    OriginalPaper 15 January 2015 Pages: 357 - 364

45. Maskless laser direct imaging lithography using a 355-nm UV light source in manufacturing of flexible fine dies

    • Kitaek Ryoo
    • Minwook Kim
    • Myungchang Kang

    OriginalPaper 15 January 2015 Pages: 365 - 370

46. Voronoi diagram and microstructure of weldment

    • Jungho Cho

    OriginalPaper 15 January 2015 Pages: 371 - 374

47. Characteristics of tool wear in a combined double cup extrusion process

    • Jeong Hoon Noh
    • Beong Bok Hwang

    OriginalPaper 15 January 2015 Pages: 375 - 386

48. Energy-saving in excavators with application of independent metering valve

    • Kyujeong Choi
    • Jaho Seo
    • Kyeong Uk Kim

    OriginalPaper 15 January 2015 Pages: 387 - 395

49. Virtual excavator simulator featuring HILS and haptic joysticks

    • Yun-Joo Nam
    • Myeong-Kwan Park

    OriginalPaper 15 January 2015 Pages: 397 - 407

50. Emission and heat recovery characteristics of combustor-type CO₂ generator with an after-treatment device and regenerative heating device for greenhouses

    • Byungchul Choi
    • Jung-Hyun Lee

    OriginalPaper 15 January 2015 Pages: 409 - 417