1. The effects of a spray slurry nozzle on copper CMP for reduction in slurry consumption

   • Dasol Lee
   • Hyunseop Lee
   • Haedo Jeong

   OriginalPaper 12 December 2015 Pages: 5057 - 5062

2. Investigation of thermoplastic hot embossing process using soft polydimethylsiloxane (PDMS) micromold

   • Bong-Kee Lee
   • Bom-yee Lee

   OriginalPaper 12 December 2015 Pages: 5063 - 5067

3. Fast stabilization of web tension in drying process of roll-to-roll printing equipment for printed electronics

   • Sung Woong Jeon
   • Cheol Kim
   • Chung Hwan Kim

   OriginalPaper 12 December 2015 Pages: 5069 - 5074

4. Muscle activity and spinal loading in lifting symmetrical loads beside the body compared to in front of the body

   • Murali Subramaniyam
   • Seung Nam Min
   • Sangho Park

   OriginalPaper 12 December 2015 Pages: 5075 - 5081

5. A study on modeling customer preferences for conceptual design

   • Soonyoung Han
   • Seokhoon Seo
   • Hae-Jin Choi

   OriginalPaper 12 December 2015 Pages: 5083 - 5091

6. Improvement of structural design accuracy using a casting-structural interface (CSI) method in large-scale sand castings

   • Jae Hyun Yu
   • Zhi jun Zhao
   • Sang Hu Park

   OriginalPaper 12 December 2015 Pages: 5093 - 5098

7. Manufacture of a large-sized flat panel airlift photobioreactor (FPA PBR) case with characteristic shapes using a thermoforming process

   • Ho-Jin Lee
   • Dong-Gyu Ahn

   OriginalPaper 12 December 2015 Pages: 5099 - 5105

8. Superhydrophobic hierarchical structures produced through novel low-cost stamp fabrication and hot embossing of thermoplastic film

   • Chae-Hee Lim
   • Sol-Yi Han
   • Wook-Bae Kim

   OriginalPaper 12 December 2015 Pages: 5107 - 5111

9. Verification of product design using regulation knowledgebase and Web services

   • Ikjune Kim
   • Jaechul Lee
   • Duhwan Mun

   OriginalPaper 12 December 2015 Pages: 5113 - 5119

10. The effect of cryogenic cooling and minimum quantity lubrication on end milling of titanium alloy Ti-6Al-4V

    • Kyung-Hee Park
    • Gi-Dong Yang
    • Seok-Woo Lee

    OriginalPaper 12 December 2015 Pages: 5121 - 5126

11. An investigation into the anti-releasing performance of a serrated bolt

    • Jin Hwan Jeong
    • Hyun-Kyu Lee
    • Jong-Bong Kim

    OriginalPaper 12 December 2015 Pages: 5127 - 5132

12. Research for improved flexible tactile sensor sensitivity

    • Hae-yong Yun
    • Ho-chan Kim
    • In-hwan Lee

    OriginalPaper 12 December 2015 Pages: 5133 - 5138

13. Slicing algorithms for multi-axis 3-D metal printing of overhangs

    • Kyubok Lee
    • Haeseong Jee

    OriginalPaper 12 December 2015 Pages: 5139 - 5144

14. Aiming error analysis of guns in ground combat vehicles operating on bumpy roads

    • Jae-Bok Song
    • Sang-Yeong Choi
    • Kang Park

    OriginalPaper 12 December 2015 Pages: 5145 - 5150

15. Case study: Hybrid model for the customized wrist orthosis using 3D printing

    • Huhn Kim
    • Seongwon Jeong

    OriginalPaper 12 December 2015 Pages: 5151 - 5156

16. A component mode synthesis method for 3-D finite element models of aero-engines

    • Yanfei Zuo
    • Jianjun Wang

    OriginalPaper 12 December 2015 Pages: 5157 - 5166

17. Analysis of vibro-impacts in a torsional system under both wide open throttle and coast conditions with focus on the multi-staged clutch damper

    • Jong-Yun Yoon
    • Byeongil Kim

    OriginalPaper 12 December 2015 Pages: 5167 - 5181

18. Experimental investigation of friction noise in lead screw system under mode-coupling

    • Jaeyoung Kang
    • Kangsuk Seo
    • Keysun Kim

    OriginalPaper 12 December 2015 Pages: 5183 - 5188

19. Optimal design of planar slider-crank mechanism using teaching-learning-based optimization algorithm

    • Kailash Chaudhary
    • Himanshu Chaudhary

    OriginalPaper 12 December 2015 Pages: 5189 - 5198

20. Temporal and spectral characteristics of BSR noises and influence on auditory perception

    • Jongho Lee
    • Sinyeob Lee
    • Junhong Park

    OriginalPaper 12 December 2015 Pages: 5199 - 5204

21. Dynamic analysis of the machine drive system

    • Huiduan Zhang

    OriginalPaper 12 December 2015 Pages: 5205 - 5215

22. Ultrasonic signal analysis according to laser ultrasound generation position for the detection of delamination in composites

    • Kyung Min Hong
    • Young June Kang
    • Gil Dong Lee

    OriginalPaper 12 December 2015 Pages: 5217 - 5222

23. Influence of heat treated microstructures on the dynamic deformation characteristics of Ti-6Al-4V alloy

    • Yongseok Seo
    • Sung-Choong Woo
    • Young-Shin Lee

    OriginalPaper 12 December 2015 Pages: 5223 - 5232

24. The effect of mechanical properties on hole flangeability of stainless steel sheets

    • Min Li
    • Chester J. VanTyne
    • Young Hoon Moon

    OriginalPaper 12 December 2015 Pages: 5233 - 5239

25. Crack initiation and propagation under fretting fatigue of inconel 600 alloy

    • Han-Kyu Jeung
    • Jae-Do Kwon
    • Choon Yeol Lee

    OriginalPaper 12 December 2015 Pages: 5241 - 5244

26. A computational study on the influence of a bleed slot on the flowfield of a bump-type inlet

    • Sang Dug Kim

    OriginalPaper 12 December 2015 Pages: 5245 - 5250

27. Effect of the number of blades on the performance and cavitation instabilities of a turbopump inducer with an identical solidity

    • Byung Yun Kang
    • Shin-Hyoung Kang

    OriginalPaper 12 December 2015 Pages: 5251 - 5256

28. Large eddy simulation of cooling flows in underground subway station according to different psd operating conditions

    • Yong-Jun Jang
    • Jin-Ho Kim
    • Dong-Hoe Koo

    OriginalPaper 12 December 2015 Pages: 5257 - 5265

29. Numerical investigation of flow-induced deformation along the human respiratory upper airway

    • So-Hee Kim
    • Seung-Kyu Chung
    • Yang Na

    OriginalPaper 12 December 2015 Pages: 5267 - 5272

30. Temporal discretization of viscous stress terms of incompressible Navier–Stokes equations with surface tension effect

    • Sanghun Choi
    • Hyoung Gwon Choi

    OriginalPaper 12 December 2015 Pages: 5273 - 5279

31. Three-dimensional wing behaviors of a rhinoceros beetle during takeoff flights

    • Boogeon Lee
    • Hyungmin Park
    • Sun-Tae Kim

    OriginalPaper 12 December 2015 Pages: 5281 - 5288

32. Enhanced volume decomposition minimizing overlapping volumes for the recognition of design features

    • Byung Chul Kim
    • Duhwan Mun

    OriginalPaper 12 December 2015 Pages: 5289 - 5298

33. Optimal design of a composite space shield based on numerical simulations

    • Byung Jin Son
    • Jeonghoon Yoo
    • Minhyung Lee

    OriginalPaper 12 December 2015 Pages: 5299 - 5308

34. Semi-analytic formulation and its experimental verification to determine the radiation patterns of ultrasonic guided waves generated on a plate by a magnetostrictive patch transducer

    • Hocheol Lee
    • Yoon Young Kim

    OriginalPaper 12 December 2015 Pages: 5309 - 5316

35. MHD mixed convection slip flow in a vertical parallel plate microchannel heated at asymmetric and uniform heat flux

    • Mehdi Moslehi
    • Mohsen Saghafian

    OriginalPaper 12 December 2015 Pages: 5317 - 5324

36. Effect of carbon nano tube (CNT) particles in magnetic abrasive finishing of Mg alloy bars

    • Lida Heng
    • Gyun Eui Yang
    • Sang Don Mun

    OriginalPaper 12 December 2015 Pages: 5325 - 5333

37. A parametric study of the confined spraying distance, solution concentration, and spraying time for the spraying technique used to fabricate PS superhydrophobic surfaces

    • Ki Myoung Song
    • Young-Sam Cho

    OriginalPaper 12 December 2015 Pages: 5335 - 5343

38. Risk assessment of remanufacturing arm structure for crane based on potential failure mode

    • Qing Dong
    • Gening Xu
    • Huili Ren

    OriginalPaper 12 December 2015 Pages: 5345 - 5357

39. Mechanism of rock breaking by pick assisted with water jet of different modes

    • Xiaohui Liu
    • Songyong Liu
    • Huifu Ji

    OriginalPaper 12 December 2015 Pages: 5359 - 5368

40. Fabrication and evaluation of 3D β-TCP scaffold by novel direct-write assembly method

    • Min-Woo Sa
    • Jong Young Kim

    OriginalPaper 12 December 2015 Pages: 5369 - 5376

41. Direct-print/cure as a molded interconnect device (MID) process for fabrication of automobile cruise controllers

    • Yanfeng Lu
    • Hae-Yong Yun
    • Jae-Won Choi

    OriginalPaper 12 December 2015 Pages: 5377 - 5385

42. Prediction of punch life in notching process for automatic transmission retainer considering fatigue and wear

    • In-Kyu Lee
    • Myeong-Sik Joeng
    • Byung-Min Kim

    OriginalPaper 12 December 2015 Pages: 5387 - 5393

43. Control of spool position of on/off solenoid operated hydraulic valve by sliding-mode controller

    • Jae-Hak Lee
    • Young-Won Yun
    • Myeong-Kwan Park

    OriginalPaper 12 December 2015 Pages: 5395 - 5408

44. Coordinated control with electronic stability control and active steering devices

    • Seongjin Yim

    OriginalPaper 12 December 2015 Pages: 5409 - 5416

45. Trajectory following control of mobile inverted pendulum robot with pre-determined tilt angle

    • Mihee Nam
    • Seongik Han
    • Jangmyung Lee

    OriginalPaper 12 December 2015 Pages: 5417 - 5424

46. Object tracking and following six-legged robot system using Kinect camera based on Kalman filter and backstepping controller

    • Amruta Vinod Gulalkari
    • Pandu Sandi Pratama
    • Sang Bong Kim

    OriginalPaper 12 December 2015 Pages: 5425 - 5436

47. A modified perturbation/correlation method for force-guided assembly

    • Jaesung Oh
    • Jun-Ho Oh

    OriginalPaper 12 December 2015 Pages: 5437 - 5446

48. Experimental study of R134a/R410A cascade cycle for variable refrigerant flow heat pump systems

    • Jeonghun Kim
    • Jaewan Lee
    • Warn-Gyu Park

    OriginalPaper 12 December 2015 Pages: 5447 - 5458

49. Effect of corrugation geometry on the moisture transfer and pressure drop for humidifying element made of cellulose and PET

    • Nae-Hyun Kim

    OriginalPaper 12 December 2015 Pages: 5459 - 5467

50. Thermal analysis of high-speed permanent magnet motor with cooling flows supported on gas foil bearings: part I - coupled thermal and loss modeling

    • Kyuho Sim
    • Yong-Bok Lee
    • Tae Ho Kim

    OriginalPaper 12 December 2015 Pages: 5469 - 5476