1. Machine capability index evaluation of machining center

   • Won-Pyo Hong

   OriginalPaper 18 October 2013 Pages: 2905 - 2910

2. Effect of wafer size on material removal rate and its distribution in chemical mechanical polishing of silicon dioxide film

   • Hyunseop Lee
   • Yeongbong Park
   • Haedo Jeong

   OriginalPaper 18 October 2013 Pages: 2911 - 2916

3. Investigation of deformation and collapse mechanism for magnesium tube in axial crushing test

   • Jonghun Yoon
   • Youngseon Lee
   • Hoon Huh

   OriginalPaper 18 October 2013 Pages: 2917 - 2921

4. Numerical investigation on vibration characteristics of a micro-speaker diaphragm considering thermoforming effects

   • Kyeong-Min Kim
   • Keun Park

   OriginalPaper 18 October 2013 Pages: 2923 - 2928

5. Direct-write/cure conductive polymer nanocomposites for 3D structural electronics

   • Yanfeng Lu
   • Morteza Vatani
   • Jae-Won Choi

   OriginalPaper 18 October 2013 Pages: 2929 - 2934

6. Fundamental study on electron beam weld sections and strengths using AA6061-T6 aluminum alloy plate

   • Soosung Kim
   • Yongjin Jeong
   • Yoonsang Lee

   OriginalPaper 18 October 2013 Pages: 2935 - 2940

7. Failure characteristics of a thin metallic sandwich plate with metallic sheared dimple cores under low-velocity impact loading

   • Dong-Gyu Ahn
   • Woo-Chul Jeong

   OriginalPaper 18 October 2013 Pages: 2941 - 2946

8. Software supports and E-manufacturing for DMT process

   • Haeseong Jee
   • Jeonghun Suh

   OriginalPaper 18 October 2013 Pages: 2947 - 2953

9. Microstructure and mechanical properties of AM50 alloy according to thickness and forming condition of the products by a high pressure die-casting process

   • Joonhong Park
   • Chunggil Kang

   OriginalPaper 18 October 2013 Pages: 2955 - 2960

10. Design of multi-scaffold fabrication system for various 3D scaffolds

    • Min-Woo Sa
    • Jong Young Kim

    OriginalPaper 18 October 2013 Pages: 2961 - 2966

11. Model study on flow behavior for investigating coating conditions in the in-mold coating process

    • Phuong NguyenThi
    • Arim Kwon
    • Jae Sung Yoon

    OriginalPaper 18 October 2013 Pages: 2967 - 2971

12. Development of DMD-based micro-stereolithography apparatus for biodegradable multi-material micro-needle fabrication

    • Haeyong Yun
    • Hochan Kim

    OriginalPaper 18 October 2013 Pages: 2973 - 2978

13. Finite element analysis for temperature distributions in a cold forging

    • Dongbum Kim
    • Sungwook Kim
    • Haeyong Cho

    OriginalPaper 18 October 2013 Pages: 2979 - 2984

14. Design of a planar 3-DOF parallel micromanipulator

    • Jeong Jae Lee
    • Yanlu Dong
    • Moon Gu Lee

    OriginalPaper 18 October 2013 Pages: 2985 - 2990

15. Effect of heat treatment on the hydrogen delayed fracture of high strength spring steel

    • Yong-Jun Lee
    • Jun-Ho Park
    • Sung-Su Kang

    OriginalPaper 18 October 2013 Pages: 2991 - 2996

16. Die design optimization of die casting for fabrication of fuel cell aluminum bipolar plate with micro-channel through casting simulation and experimental investigation

    • Chul Kyu Jin
    • Chan Hyun Jang
    • Chung Gil Kang

    OriginalPaper 18 October 2013 Pages: 2997 - 3003

17. Transient liquid phase diffusion bonding for micro PCD tool fabrication

    • Bawi Jeong
    • Jeongwoo Park

    OriginalPaper 18 October 2013 Pages: 3005 - 3010

18. A study of the relationship between stick-slip and micro-scratches generation during chemical-mechanical polishing process

    • Soyoung Jung
    • Woo Yul Yang
    • In-Ha Sung

    OriginalPaper 18 October 2013 Pages: 3011 - 3015

19. Development of digital lithography masking method with focusing mechanism for fabrication of micro-feature on biomachining process

    • Agung Shamsuddin Saragih
    • Tae Jo Ko

    OriginalPaper 18 October 2013 Pages: 3017 - 3022

20. Conditions of rib design for polycarbonate resin with high glossy surfaces

    • Seong Won Jeong

    OriginalPaper 18 October 2013 Pages: 3023 - 3028

21. Surface roughness for dispensing patterns in nozzle dispensing solid freeform technology

    • Hyun Jun Jung
    • In Hwan Lee
    • Hae Yong Cho

    OriginalPaper 18 October 2013 Pages: 3029 - 3033

22. Rotordynamic analysis and experimental validation of a high speed induction motor made by copper die casting process

    • Do-Kwan Hong
    • Jae-Hak Choi
    • Chan-Woo Ahn

    OriginalPaper 18 October 2013 Pages: 3035 - 3041

23. Sensitivity analysis of design parameters of an anti-aircraft gun for hit probability enhancement

    • Kang Park
    • Hwan-il Kang
    • Chong-man Kim

    OriginalPaper 18 October 2013 Pages: 3043 - 3046

24. A study on the restoration method of friction, wear and fatigue performance of remanufactured crankshaft

    • Yasutoshi Tominaga
    • Jinsoo Kim
    • Juha Woo

    OriginalPaper 18 October 2013 Pages: 3047 - 3051

25. A study on process parameters for cold U-bending of SUS304L heat transfer tube using rotary draw bending

    • Tae-Wan Ku
    • Jin-Hyun Cha
    • Beom-Soo Kang

    OriginalPaper 18 October 2013 Pages: 3053 - 3061

26. Induced nonlocal electric wave propagation of boron nitride nanotubes

    • Ali Ghorbanpour Arani
    • Ali Hafizi Bidgoli
    • Mohammad Bagher Azizkhani

    OriginalPaper 18 October 2013 Pages: 3063 - 3071

27. Finite element simulation of crack propagation based on phase field theory

    • Joonyeoun Cho
    • Kwan-Soo Lee

    OriginalPaper 18 October 2013 Pages: 3073 - 3085

28. Hydro-thermo-mechanical analysis on high cycle thermal fatigue induced by thermal striping in a T-junction

    • Sun-Hye Kim
    • Nam-Su Huh
    • Jae-Boong Choi

    OriginalPaper 18 October 2013 Pages: 3087 - 3095

29. Analysis of three collinear antiplane interfacial cracks in dissimilar piezoelectric materials under non-self equilibrated electromechanical loadings on a center crack

    • Sung Ryul Choi
    • Ilsup Chung

    OriginalPaper 18 October 2013 Pages: 3097 - 3101

30. A numerical study of the gas and particle dynamics in a needle free drug delivery device

    • Md. Alim Iftekhar Rasel
    • Heuy-Dong Kim

    OriginalPaper 18 October 2013 Pages: 3103 - 3112

31. Wind tunnel experiment for wind breakage of Actinidia deliciosa P. shoots

    • Jong-Hoon Kang
    • Eui-Jae Lee
    • Sang-Joon Lee

    OriginalPaper 18 October 2013 Pages: 3113 - 3121

32. Fabrication of 3D soft morphing structure using shape memory alloy (SMA) wire/polymer skeleton composite

    • Ji-Soo Kim
    • Jang-Yeob Lee
    • Sung-Hoon Ahn

    OriginalPaper 18 October 2013 Pages: 3123 - 3129

33. Qualitative verification of the dispersion level in nano-composite and its application to YD-128/MWCNT composite to assess the wear characteristics with respect to the dispersion level

    • Ghi Pyoung Choi
    • Dongwoo Sohn
    • Young-Sam Cho

    OriginalPaper 18 October 2013 Pages: 3131 - 3138

34. Micromechanics-based evaluation of the poroelastic effect and stress concentration in thermochemically-decomposed composites

    • Sung Jun Kim
    • Su Yeon Han
    • Eui Sup Shin

    OriginalPaper 18 October 2013 Pages: 3139 - 3147

35. Assessment of ZK60A magnesium billets for forging depending on casting methods by upsetting and tomography

    • K. H. Jung
    • S. Lee
    • G. A. Lee

    OriginalPaper 18 October 2013 Pages: 3149 - 3153

36. Study on the effect of various machining speeds on the wafer polishing process

    • Eun Sang Lee
    • Sang Gyun Lee
    • Seung Geon Choi

    OriginalPaper 18 October 2013 Pages: 3155 - 3160

37. Analysis of the assistance characteristics for the knee extension motion of knee orthosis using muscular stiffness force feedback

    • Kyung Kim
    • Chang-Ho Yu
    • Tae-Kyu Kwon

    OriginalPaper 18 October 2013 Pages: 3161 - 3169

38. Anti-sway trajectory generation of incompletely restrained wire-suspended system

    • Jaehwan Park
    • Ohung Kwon
    • Jong Hyeon Park

    OriginalPaper 18 October 2013 Pages: 3171 - 3176

39. The effect of surface area on pool boiling heat transfer coefficient and CHF of Al₂O₃/water nanofluids

    • Eung Surk Kim
    • Jung-Yeul Jung
    • Yong Tae Kang

    OriginalPaper 18 October 2013 Pages: 3177 - 3182

40. Total emissivity of CO₂ near earth atmospheric condition

    • K. H. Byun
    • L. -D. Chen

    OriginalPaper 18 October 2013 Pages: 3183 - 3189

41. Lifter design for enhanced heat transfer in a rotary kiln reactor

    • Hookyung Lee
    • Sangmin Choi

    OriginalPaper 18 October 2013 Pages: 3191 - 3197