1. Kinematics and dynamics modeling of the 6-3-\(\underset{\raise0.3em\hbox{$\smash{\scriptscriptstyle-}$}}{\text{P}}\text{US}\)-type Hexapod parallel mechanism

   • Jaqueline Bernal
   • Ricardo Campa
   • Israel Soto

   OriginalPaper 23 October 2018 Pages: 4555 - 4570

2. Numerical and experimental investigations on the hydrodynamic radial force of single-channel pumps

   • Linwei Tan
   • Weidong Shi
   • Elemam Mahmoud

   OriginalPaper 23 October 2018 Pages: 4571 - 4581

3. Effect of fastening method on the vibration energy flow through bolted structural joints

   • Maryam Faiiazee
   • Jeong-Guon Ih

   OriginalPaper 23 October 2018 Pages: 4583 - 4588

4. Adaptive combined HOEO based fault feature extraction method for rolling element bearing under variable speed condition

   • Danchen Zhu
   • Yongxiang Zhang
   • Qunwei Zhu

   OriginalPaper 23 October 2018 Pages: 4589 - 4599

5. Free vibration analysis of joined conical-cylindrical shells by matched Fourier-Chebyshev collocation method

   • Jinhee Lee

   OriginalPaper 23 October 2018 Pages: 4601 - 4612

6. Nano- and submicro-sized three-dimensional shape measuring system using a SAW-based capacitance sensor

   • Kyoung-Su Park

   OriginalPaper 23 October 2018 Pages: 4613 - 4619

7. A study on life evaluation & prediction of railway vehicle contactor based on accelerated life test data

   • Minheung Park
   • Sehun Rhee

   OriginalPaper 23 October 2018 Pages: 4621 - 4628

8. Numerical simulation on high speed impact behavior of Al-W and Al-Ni mixture

   • Kyungsun Chung
   • Hyoungjoon Kwon
   • Soonho Song

   OriginalPaper 23 October 2018 Pages: 4629 - 4636

9. Multiple failure mode reliability modeling and analysis in failure crack propagation based on time-varying copula

   • Yuantao Sun
   • Zengzeng Zhang
   • Lifu Luo

   OriginalPaper 23 October 2018 Pages: 4637 - 4648

10. Numerical estimation of non-equilibrium condensation of steam in supersonic nozzles

    • E. Jabir
    • Brezgin Dmitrii
    • Heuy Dong Kim

    OriginalPaper 23 October 2018 Pages: 4649 - 4655

11. Numerical simulation of vapor volume fraction in a vertical channel under low-pressure conditions

    • Sivaranjani Sivalingam
    • SalaiSargunan S. Paramanantham
    • Warn-Gyu Park

    OriginalPaper 23 October 2018 Pages: 4657 - 4664

12. Computational investigation of variation in wing aerodynamic load under effect of aeroelastic deformations

    • Ngoc T. B. Hoang

    OriginalPaper 23 October 2018 Pages: 4665 - 4673

13. Prevention of air entrainment during liquid draining using disc-type vortex suppressor

    • Jong Hyeon Son
    • Il Seouk Park

    OriginalPaper 23 October 2018 Pages: 4675 - 4682

14. Numerical study on the internal flow characteristics of an axial-flow pump under stall conditions

    • Kan Kan
    • Yuan Zheng
    • Chunxia Yang

    OriginalPaper 23 October 2018 Pages: 4683 - 4695

15. Effect of teeth bending and mushrooming damages on leakage performance of a labyrinth seal

    • Xin Yan
    • Xinbo Dai
    • Kun He

    OriginalPaper 23 October 2018 Pages: 4697 - 4709

16. An experimental study on the cavitation vibration characteristics of a centrifugal pump at normal flow rate

    • Yi Li
    • Guangwei Feng
    • Zuchao Zhu

    OriginalPaper 23 October 2018 Pages: 4711 - 4720

17. An experimental study on the effect of square grooves on decay characteristics of a supersonic jet from a circular nozzle

    • S. Ilakkiya
    • B. T. N. Sridhar

    OriginalPaper 23 October 2018 Pages: 4721 - 4729

18. Experimental study on slippery droplet dynamics using optical correction method

    • Yeonghyeon Gim
    • Dong Kyu Jang
    • Han Seo Ko

    OriginalPaper 23 October 2018 Pages: 4731 - 4736

19. Fabrication and experiment of piezoelectric pump imitating peristalsis

    • Yeong-min Na
    • Hyun-seok Lee
    • Jong-kyu Park

    OriginalPaper 23 October 2018 Pages: 4737 - 4745

20. A study on piezoelectric energy harvester using kinetic energy of ocean

    • Yeong-min Na
    • Hyun-seok Lee
    • Jong-kyu Park

    OriginalPaper 23 October 2018 Pages: 4747 - 4755

21. Dynamic crack tip fields, T-stress and energy release rate in anisotropy

    • Kwang Ho Lee

    OriginalPaper 23 October 2018 Pages: 4757 - 4765

22. Asymmetric impermeable wedge crack in a piezoelectric material under anti-plane deformation

    • Sung Ryul Choi
    • Ilsup Chung

    OriginalPaper 23 October 2018 Pages: 4767 - 4773

23. Evolutionary multi-objective optimization of energy efficiency in electrical discharge machining

    • Marin Gostimirovic
    • Vladimir Pucovsky
    • Milos Madic

    OriginalPaper 23 October 2018 Pages: 4775 - 4785

24. Warpage reduction through optimized process parameters and annealed process of injection-molded plastic parts

    • Supattarachai Sudsawat
    • Wipoo Sriseubsai

    OriginalPaper 23 October 2018 Pages: 4787 - 4799

25. Microstructure and mechanical properties of 2060-T8 Al-Li alloy after warm incremental forming

    • Hui Wang
    • Yanbo Gu
    • Yong Xu

    OriginalPaper 23 October 2018 Pages: 4801 - 4812

26. Roll design method using virtual flow line for multi-stage profile rolling process

    • Hyeon-Seok Jung
    • Jeong-Hun Kim
    • Byung-Min Kim

    OriginalPaper 23 October 2018 Pages: 4813 - 4819

27. The investigation of wear properties of different hard filling welding electrodes used in repair welding

    • Ahmet Akkus

    OriginalPaper 23 October 2018 Pages: 4821 - 4827

28. Investigation on the semi-conjugate tooth model and disc milling process of logarithmic spiral bevel gears of pure-rolling contact

    • Rulong Tan
    • Changyan Peng
    • Bingkui Chen

    OriginalPaper 23 October 2018 Pages: 4829 - 4838

29. Modeling and analysis of multi-shot injection molding of Blu-ray objective lens

    • Min-Wen Wang
    • Chao-Hsien Chen
    • Jian-Jr Lin

    OriginalPaper 23 October 2018 Pages: 4839 - 4849

30. Evaluation of machinability in milling by controlling chip thickness using NC simulation

    • Makoto Nikawa
    • Masato Okada
    • Minoru Yamashita

    OriginalPaper 23 October 2018 Pages: 4851 - 4858

31. Spring back analysis in incremental forming of polypropylene sheet: An experimental study

    • Khalid A. Al-Ghamdi

    OriginalPaper 23 October 2018 Pages: 4859 - 4869

32. The application of a regularization method to the estimation of geometric errors of a three-axis machine tool using a double ball bar

    • Wenjie Tian
    • Guang Yang
    • Weiguo Gao

    OriginalPaper 23 October 2018 Pages: 4871 - 4881

33. Cutting mechanism and surface integrity in milling of Ti-5553 processed by selective laser melting

    • Thilo Grove
    • Berend Denkena
    • Uta Kühn

    OriginalPaper 23 October 2018 Pages: 4883 - 4892

34. Study on the pitch angle control of a robotized hydraulic drive roadheader using different control methods

    • Minjun Zhang
    • Fuyan Lyu
    • Miao Wu

    OriginalPaper 23 October 2018 Pages: 4893 - 4901

35. Novel design of stair climbing wheelchair

    • Pravat Kumar Behera
    • Ankur Gupta

    OriginalPaper 23 October 2018 Pages: 4903 - 4908

36. Sensor-less external force detection for industrial manipulators to facilitate physical human-robot interaction

    • Bitao Yao
    • Zude Zhou
    • Quan Liu

    OriginalPaper 23 October 2018 Pages: 4909 - 4923

37. Unified model for the output accuracy of open-chain manipulators that considers joint clearance and structural parameters

    • Shuwei Qu
    • Ruiqin Li
    • Shijie Liang

    OriginalPaper 23 October 2018 Pages: 4925 - 4931

38. A study on the optimal route design considering time of mobile robot using recurrent neural network and reinforcement learning

    • Min Hyuk Woo
    • Soo-Hong Lee
    • Hye Min Cha

    OriginalPaper 23 October 2018 Pages: 4933 - 4939

39. Dynamic characteristics and test analysis of a new drilling downhole tool with anti-stick-slip features

    • Jialin Tian
    • Tangjia Zhang
    • Changfu Yuan

    OriginalPaper 23 October 2018 Pages: 4941 - 4949

40. Force-balancing algorithm to remove the discontinuity in soil force during wheel loader excavation

    • Heejong Lee
    • Mooseung Kim
    • Wansuk Yoo

    OriginalPaper 23 October 2018 Pages: 4951 - 4957

41. Vibration response and parameter influence of TBM cutterhead system under extreme conditions

    • Jingxiu Ling
    • Wei Sun
    • Ning Zhang

    OriginalPaper 23 October 2018 Pages: 4959 - 4969

42. Effect of pressure ratio and oil viscosity on rotary compressor efficiency

    • Sangkyung Na
    • Myeongsu Shin
    • Byungchae Min

    OriginalPaper 23 October 2018 Pages: 4971 - 4981

43. Investigation of entropy generation rate and its minimization in helical grooved tubes

    • Shamoon Jamshed
    • Shafiq R. Qureshi
    • Ahmad Hussain

    OriginalPaper 23 October 2018 Pages: 4983 - 4991

44. Analytical modeling of parabolic linear collectors for solar power plant

    • Atwari Rawani
    • S. P. Sharma
    • Kumari Namarata

    OriginalPaper 23 October 2018 Pages: 4993 - 5004

45. Natural convective hybrid fin heat sinks for lightweight and high performance thermal management

    • Nico Setiawan Effendi
    • Kyoung Joon Kim

    OriginalPaper 23 October 2018 Pages: 5005 - 5013

46. Investigations into film cooling and unsteady flow characteristics in a blade trailing-edge cutback region

    • Yan Gao
    • Xin Yan
    • Kun He

    OriginalPaper 23 October 2018 Pages: 5015 - 5029

47. Experimental analysis of HRSG for simulating internal flow behavior using Euler and swirl similitudes

    • Hyun-Kyoo So
    • Tae-Hyun Jo
    • Do-Hyung Lee

    OriginalPaper 23 October 2018 Pages: 5031 - 5038

48. Development of a survivability evaluation procedure for bullet penetration into human body

    • Gil Ho Yoon
    • Ki Hyun Kim
    • Se Jin Hwang

    OriginalPaper 23 October 2018 Pages: 5039 - 5047