1. Theoretical and numerical investigation on impact noise radiated by collision of two cylinders

   • Yinggang Li
   • Tianning Chen
   • Chao Zhang

   OriginalPaper 14 June 2014 Pages: 2017 - 2024

2. Transfer characteristics of vehicle air conditioners’ booming noise

   • Seung Taek Lim
   • Kyung Hoon Joo
   • Yeon June Kang

   OriginalPaper 14 June 2014 Pages: 2025 - 2031

3. Dynamic analysis of the drive train of a wind turbine based upon the measured load spectrum

   • Caichao Zhu
   • Shuang Chen
   • Fei Ma

   OriginalPaper 14 June 2014 Pages: 2033 - 2040

4. Identifying the frequency dependent material property of a hydraulic engine mount through an iterative procedure using 3D finite element modeling

   • Kamal Jahani
   • Masoud Dehnad

   OriginalPaper 14 June 2014 Pages: 2041 - 2047

5. Vibratory synchronization transmission of two exciters in a super-resonant vibrating system

   • Xueliang Zhang
   • Bangchun Wen
   • Chunyu Zhao

   OriginalPaper 14 June 2014 Pages: 2049 - 2058

6. On a combination of ground-hook controllers for semi-active tuned mass dampers

   • L. D. Viet
   • N. B. Nghi
   • L. X. Hung

   OriginalPaper 14 June 2014 Pages: 2059 - 2064

7. Prediction on building vibration induced by moving train based on support vector machine and wavelet analysis

   • Jinbao Yao
   • He Xia
   • Bin Yu

   OriginalPaper 14 June 2014 Pages: 2065 - 2074

8. Characteristic recognition of chatter mark vibration in a rolling mill based on the non-dimensional parameters of the vibration signal

   • Yimin Shao
   • Xiao Deng
   • Zaigang Chen

   OriginalPaper 14 June 2014 Pages: 2075 - 2080

9. Free vibration analysis of corroded steel plates

   • Alireza Eslami-Majd
   • Ahmad Rahbar-Ranji

   OriginalPaper 14 June 2014 Pages: 2081 - 2088

10. Smart health evaluation of slewing bearing based on multiple-characteristic parameters

    • Hua Wang
    • Mingmin Tang
    • Xiaodiao Huang

    OriginalPaper 14 June 2014 Pages: 2089 - 2097

11. Response-only modal identification using random decrement algorithm with time-varying threshold level

    • Chang-Sheng Lin
    • Tse-Chuan Tseng

    OriginalPaper 14 June 2014 Pages: 2099 - 2109

12. A trigonometric series expansion based method for the research of static and dynamic characteristics of eccentric seals

    • Dan Sun
    • Jiangang Yang
    • Yanting Ai

    OriginalPaper 14 June 2014 Pages: 2111 - 2120

13. Using stress relief grooves to reduce stress concentration on axle drive shaft

    • Jae-Myung Shin
    • Dong-Sub Han
    • Seung-Ho Han

    OriginalPaper 14 June 2014 Pages: 2121 - 2127

14. Influence of density variation on the arbitrarily propagating crack tip fields in functionally graded materials

    • Kwang Ho Lee

    OriginalPaper 14 June 2014 Pages: 2129 - 2140

15. Quarter elliptical crack growth using three dimensional finite element method and crack closure technique

    • Mohammad-Hosein Gozin
    • Mehrdad Aghaie-Khafri

    OriginalPaper 14 June 2014 Pages: 2141 - 2151

16. Correlation between fretting and plain fatigue using fatigue damage gradient

    • Donghyeon Hwang
    • Sung-San Cho

    OriginalPaper 14 June 2014 Pages: 2153 - 2159

17. Residual stress analysis of the thermal barrier coating system by considering the plasma spraying process

    • Myung-Jae Lee
    • Byung-Chai Lee
    • Moon-Ki Kim

    OriginalPaper 14 June 2014 Pages: 2161 - 2168

18. Assessment of combined V/Z clamp-on ultrasonic flow metering

    • Sejong Chun
    • Byung-Ro Yoon
    • Hyu-Sang Kwon

    OriginalPaper 14 June 2014 Pages: 2169 - 2177

19. Numerical simulations of impact flows with incompressible smoothed particle hydrodynamics

    • Abdelraheem M. Aly
    • Sang-Wook Lee

    OriginalPaper 14 June 2014 Pages: 2179 - 2188

20. Experimental and numerical investigations of radial flow compressor component losses

    • Mohammad Mojaddam
    • Ali Hajilouy-Benisi
    • Mohammad Durali

    OriginalPaper 14 June 2014 Pages: 2189 - 2196

21. Starting characteristics of the hypersonic wind tunnel with the mach number variation

    • Yang Ji Lee
    • Sang Hun Kang
    • Se Jin Kwon

    OriginalPaper 14 June 2014 Pages: 2197 - 2204

22. Multi-objective optimization of drive gears for power split device using surrogate models

    • Jixin Wang
    • Wanghao Shen
    • Xiaohua Zeng

    OriginalPaper 14 June 2014 Pages: 2205 - 2214

23. The conceptual design of grid-connected wind turbine based on speed regulating differential mechanism

    • Xiaoming Rui
    • Rui Su
    • Qidong Yin

    OriginalPaper 14 June 2014 Pages: 2215 - 2220

24. Design parameter study on the performance of lead-acid batteries

    • Vahid Esfahanian
    • Amir Babak Ansari
    • Goodarz Ahmadi

    OriginalPaper 14 June 2014 Pages: 2221 - 2229

25. Multidisciplinary wing design optimization considering global sensitivity and uncertainty of approximation models

    • Hyeong-Uk Park
    • Joon Chung
    • Jae-Woo Lee

    OriginalPaper 14 June 2014 Pages: 2231 - 2242

26. Effect of crack on the impact response of plates by the extended finite element method (X-FEM)

    • Rachid Tiberkak
    • Mourad Bachene
    • Said Rechak

    OriginalPaper 14 June 2014 Pages: 2243 - 2252

27. Effects of dynamic transmission errors and vibration stability in helical gears

    • Jing Wei
    • Pan Gao
    • Jing Zeng

    OriginalPaper 14 June 2014 Pages: 2253 - 2262

28. Deduction of geometrical approximation yield criterion and its application

    • Shunhu Zhang
    • Binna Song
    • Xiaodong Chen

    OriginalPaper 14 June 2014 Pages: 2263 - 2271

29. Analysis of edge slipping in a complete and adhesive contact of elastically dissimilar bodies subject to normal indentation

    • Hyung-Kyu Kim
    • Jae-Yong Kim

    OriginalPaper 14 June 2014 Pages: 2273 - 2280

30. Negative electrode structure design in InSb focal plane array detector for deformation reduction

    • Xiaoling Zhang
    • Qingduan Meng
    • Yanqiu Lv

    OriginalPaper 14 June 2014 Pages: 2281 - 2285

31. Prediction of phonon and electron contributions to thermal conduction in doped silicon films

    • Jae Sik Jin

    OriginalPaper 14 June 2014 Pages: 2287 - 2292

32. Effects of silica addition on the particle characteristics and phase transition of flame-synthesized γ-Al₂O₃ nanoparticles

    • Man Young Kim
    • Gyo Woo Lee

    OriginalPaper 14 June 2014 Pages: 2293 - 2298

33. Application of non-dominated sorting genetic algorithm for multi-objective optimization of electrical discharge diamond face grinding process

    • Ravindra Nath Yadav
    • Vinod Yadava
    • G. K. Singh

    OriginalPaper 14 June 2014 Pages: 2299 - 2306

34. Experimental estimation and optimization of process parameters under minimum quantity lubrication and dry turning of AISI-4340 with different carbide inserts

    • Akash Saini
    • Suresh Dhiman
    • Sunil Setia

    OriginalPaper 14 June 2014 Pages: 2307 - 2318

35. Effect of clearance and inclined angle on sheared edge and tool failure in trimming of DP980 sheet

    • Hong-Seok Choi
    • Byung-Min Kim
    • Dae-Cheol Ko

    OriginalPaper 14 June 2014 Pages: 2319 - 2328

36. Fabrication accuracy analysis of micromilling tools with complicated geometries by wire EDM

    • Xiang Cheng
    • Xianhai Yang
    • Li Li

    OriginalPaper 14 June 2014 Pages: 2329 - 2335

37. RETRACTED ARTICLE: Accumulative radial-forward extrusion (ARFE) processing as a novel severe plastic deformation technique

    • H. Jafarzadeh
    • A. Babaei

    OriginalPaper 06 September 2016 Pages: 2337 - 2341

38. Regulated model-based and non-model-based sliding mode control of a MEMS vibratory gyroscope

    • Asghar Ebrahimi

    OriginalPaper 14 June 2014 Pages: 2343 - 2349

39. Optimal synthesis of four-bar steering mechanism using AIS and genetic algorithms

    • Mir Mohammad Ettefagh
    • Morteza Saeidi Javash

    OriginalPaper 14 June 2014 Pages: 2351 - 2362

40. An investigation of the spray characteristics of diesel-DME blended fuel with variation of ambient pressure in a constant volume combustion chamber

    • Jiwoong Yang
    • Ocktaeck Lim

    OriginalPaper 14 June 2014 Pages: 2363 - 2368

41. Computational investigation of the temperature separation in vortex chamber

    • S. Anish
    • T. Setoguchi
    • H. D. Kim

    OriginalPaper 14 June 2014 Pages: 2369 - 2376

42. Effect of piston bowl shape on the in-cylinder flow characteristics of IC engines

    • Seung Man Nam
    • Kye Bock Lee
    • Seok Ho Rhi

    OriginalPaper 14 June 2014 Pages: 2377 - 2384

43. Constructal design of finned tubes used in air-cooled heat exchangers

    • Hossein Shokouhmand
    • Shoeib Mahjoub
    • Mohammad Reza Salimpour

    OriginalPaper 14 June 2014 Pages: 2385 - 2391

44. Determining the heat flux absorbed by satellite surfaces with temperature data

    • Hojjat Behrooz Khaniki
    • S. M. Hossein Karimian

    OriginalPaper 14 June 2014 Pages: 2393 - 2398

45. Identifying a simplified model for heavy duty gas turbine

    • Saeed Bahrami
    • Ali Ghaffari
    • Marcus Thern

    OriginalPaper 14 June 2014 Pages: 2399 - 2408

46. Characteristics of pressure and force considering friction in a closed cylinder with a holed piston

    • Nguyen Minh Phu
    • Geun Sik Lee

    OriginalPaper 14 June 2014 Pages: 2409 - 2415

47. Artificial neural network based on genetic algorithm for emissions prediction of a SI gasoline engine

    • José D. Martínez-Morales
    • Elvia R. Palacios-Hernández
    • Gerardo A. Velázquez-Carrillo

    OriginalPaper 14 June 2014 Pages: 2417 - 2427

48. Enhancement of combined cycle performance using transpiration cooling of gas turbine blades with steam

    • Sanjay Kumar
    • Onkar Singh

    OriginalPaper 14 June 2014 Pages: 2429 - 2437