1. Stick-slip conditions in the general motion of a planar rigid body

   • Iman Kardan
   • Mansour Kabganian
   • Mostafa Bagheri

   OriginalPaper 19 September 2013 Pages: 2577 - 2583

2. Dynamic response of coupled shaft torsion and blade bending in rotor blade system

   • Hwanhee Lee
   • Ji-Seok Song
   • Sungsoo Na

   OriginalPaper 19 September 2013 Pages: 2585 - 2597

3. An investigation into diesel engine air-borne acoustics using continuous wavelet transform

   • Alhussein Albarbar

   OriginalPaper 19 September 2013 Pages: 2599 - 2604

4. Structural and mechanism design of an active trailing-edge flap blade

   • Jae Hwan Lee
   • Balakumaran Natarajan
   • Sang Joon Shin

   OriginalPaper 19 September 2013 Pages: 2605 - 2617

5. Effects of eccentricity on dynamic behavior of electromechanical integrated electrostatic harmonic actuator

   • Lizhong Xu
   • Xu Shi

   OriginalPaper 19 September 2013 Pages: 2619 - 2627

6. Development of a diagnostic system using LPC/cepstrum analysis in machine vibration

   • Monica Chamay
   • Se-do Oh
   • Young-Jin Kim

   OriginalPaper 19 September 2013 Pages: 2629 - 2636

7. Eulerian and lagrangian descriptions for the vibration analysis of a deploying beam

   • Sungpil Park
   • Hong Hee Yoo
   • Jintai Chung

   OriginalPaper 19 September 2013 Pages: 2637 - 2643

8. Nonlinear vibration and instability of fluid-conveying DWBNNT embedded in a visco-Pasternak medium using modified couple stress theory

   • A. Ghorbanpour Arani
   • M. R. Bagheri
   • Z. Khoddami Maraghi

   OriginalPaper 19 September 2013 Pages: 2645 - 2658

9. Vibrational energy flow models for the 1-D high damping system

   • Ju-Bum Han
   • Suk-Yoon Hong
   • Hyun-Wung Kwon

   OriginalPaper 19 September 2013 Pages: 2659 - 2671

10. Effect of turbulent boundary layer on the surface pressure around trench cavities

    • Young-Tae Lee
    • Hee-Chang Lim

    OriginalPaper 19 September 2013 Pages: 2673 - 2681

11. Mean moment effect on sharp-notched circular tubes under cyclic bending

    • Kao-Hua Chang
    • Kuo-Long Lee

    OriginalPaper 19 September 2013 Pages: 2683 - 2689

12. A study on structural safety of mechanical ground support equipment during the launch operation of a Korea small launch vehicle (KSLV-1)

    • Daerae Kim
    • Young-Shin Lee

    OriginalPaper 19 September 2013 Pages: 2691 - 2699

13. Effects of temperature on mechanical properties of SU-8 photoresist material

    • Soonwan Chung
    • Seungbae Park

    OriginalPaper 19 September 2013 Pages: 2701 - 2707

14. Evaluation of surface residual stresses in HVOF sprayed WC-12Co coatings by XRD and ED-hole drilling

    • M. Jalali Azizpour
    • S. Nourouzi

    OriginalPaper 19 September 2013 Pages: 2709 - 2713

15. Evaluation of sensitization and corrosive damages of the weldment for SUS 316 stainless steel

    • Eui Gyun Na

    OriginalPaper 19 September 2013 Pages: 2715 - 2719

16. Muffler fatigue life prediction considering weld-zone shapes

    • Yong-Jun Lee
    • Jong-Yun Kim
    • Sung-Su Kang

    OriginalPaper 19 September 2013 Pages: 2721 - 2727

17. High temperature design and damage evaluation of a helical type sodium-to-air heat exchanger in a sodium-cooled fast reactor

    • Hyeong-Yeon Lee
    • Jae-Hyuk Eoh
    • Yong-Bum Lee

    OriginalPaper 19 September 2013 Pages: 2729 - 2735

18. Stability analysis of the confined mixing layer

    • Dongshin Shin

    OriginalPaper 19 September 2013 Pages: 2737 - 2741

19. Assessment of a turbulence model for numerical predictions of sheet-cavitating flows in centrifugal pumps?

    • Houlin Liu
    • Yong Wang
    • Jian Wang

    OriginalPaper 19 September 2013 Pages: 2743 - 2750

20. A direct shape optimization approach for contact problems with boundary stress concentration

    • H. Ou
    • B. Lu
    • C. Lin

    OriginalPaper 19 September 2013 Pages: 2751 - 2759

21. Manufacturing and testing of a GFRP composite bogie frame with straight side beam members

    • Jung-Seok Kim
    • Woo-Geun Lee
    • Il-Kyeom Kim

    OriginalPaper 19 September 2013 Pages: 2761 - 2767

22. Effect of uncertainty parameters on graphene sheets Young’s modulus prediction

    • Habib Sahlaoui
    • Mohamed Guedri
    • Habib Sidhom

    OriginalPaper 19 September 2013 Pages: 2769 - 2774

23. Welding strain analysis of friction stir-welded aluminum alloy structures using inherent strain-based equivalent loads

    • Hyung-Suk Mun
    • Sung-Il Seo

    OriginalPaper 19 September 2013 Pages: 2775 - 2782

24. Analysis method of climbing stairs with the rocker-bogie mechanism

    • Dongkyu Choi
    • Jongkyun Oh
    • Jongwon Kim

    OriginalPaper 19 September 2013 Pages: 2783 - 2788

25. Calculation of design sensitivity for large-size transient dynamic problems using Krylov subspace-based model order reduction

    • Jeong Sam Han

    OriginalPaper 19 September 2013 Pages: 2789 - 2800

26. Three-point method for measuring the geometric error components of linear and rotary axes based on sequential multilateration

    • Zhenjiu Zhang
    • Hong Hu

    OriginalPaper 19 September 2013 Pages: 2801 - 2811

27. Prediction of cutting force, tool wear and surface roughness of Al6061/SiC composite for end milling operations using RSM

    • S. Jeyakumar
    • K. Marimuthu
    • T. Ramachandran

    OriginalPaper 19 September 2013 Pages: 2813 - 2822

28. Ceramic to metal joining by using 1064 nm pulsed and CW laser energy source

    • Young Min Lee
    • Soo Won Kim
    • Hae Woon Choi

    OriginalPaper 19 September 2013 Pages: 2823 - 2827

29. Multiple-response optimization of turning machining by the taguchi method and the utility concept using uni-directional glass fiber-reinforced plastic composite and carbide (k10) cutting tool

    • Surinder Kumar
    • Meenu
    • P. S. Satsangi

    OriginalPaper 19 September 2013 Pages: 2829 - 2837

30. Application of QFA coupled with CFD analysis to predict the hardness of T6 heat treated Al6061 cylinder

    • Dae-Hoon Ko
    • Dae-Cheol Ko
    • Byung-Min Kim

    OriginalPaper 19 September 2013 Pages: 2839 - 2844

31. Influence of gas turbine specification and integration option on the performance of integrated gasification solid oxide fuel cell/gas turbine systems with CO₂ capture

    • Ji Ho Ahn
    • Sung Ku Park
    • Tong Seop Kim

    OriginalPaper 19 September 2013 Pages: 2845 - 2856

32. Combustion and emission characteristics of low rank-coals utilized in Korea

    • Yong-Gyun Kim
    • Byoung-Hwa Lee
    • Chung-Hwan Jeon

    OriginalPaper 19 September 2013 Pages: 2857 - 2868

33. Optimum residence time for steel productivity and energy saving in a hot rolled reheating furnace

    • Dong Eun Lee
    • Man Young Kim

    OriginalPaper 19 September 2013 Pages: 2869 - 2877

34. A simple model for the prediction of thermal conductivity of Ge₂Sb₂Te₅ thin film

    • Jae Sik Jin

    OriginalPaper 19 September 2013 Pages: 2879 - 2883

35. Strain effect and phonon transport in strained-silicon-based transistors

    • Jae Sik Jin

    OriginalPaper 19 September 2013 Pages: 2885 - 2891

36. Thermal conduction of stable graphite suspensions considering structural characteristics of graphite aggregations

    • Jae Sik Jin

    OriginalPaper 19 September 2013 Pages: 2893 - 2898