1. Numerical study of droplet dynamics in a PEMFC gas channel with multiple pores

   • Jiyoung Choi
   • Gihun Son

   OriginalPaper 29 July 2009 Pages: 1765 - 1772

2. Strengths of horseshoe vortices around a circular cylinder with an upstream cavity

   • K. J. Kang
   • T. Kim
   • S. J. Song

   OriginalPaper 29 July 2009 Pages: 1773 - 1778

3. Friction-induced ignition modeling of energetic materials

   • Min-cheol Gwak
   • Tae-yong Jung
   • Jack Jai-ick Yoh

   OriginalPaper 29 July 2009 Pages: 1779 - 1787

4. Evaporation of inkjet printed pico-liter droplet on heated substrates with different thermal conductivity

   • Taewoong Lim
   • Jaeik Jeong
   • Jin Taek Chung

   OriginalPaper 29 July 2009 Pages: 1788 - 1794

5. Direct numerical simulation of multiphase flow for arbitrary geometry using level contour reconstruction method

   • Seungwon Shin

   OriginalPaper 29 July 2009 Pages: 1795 - 1800

6. Study on the light receiving characteristics of a compact solar power generation system with a plant shoot shape

   • Shin’ya Obara

   OriginalPaper 29 July 2009 Pages: 1801 - 1807

7. Effects of initial parameters on the internal-melt ice-on-tube while icing

   • Bingxi Li
   • Xinhai Xu
   • Linhua Liu

   OriginalPaper 29 July 2009 Pages: 1808 - 1812

8. Measurement of three-dimensional flame structure by combined laser diagnostics

   • Takashi Ueda
   • Masayasu Shimura
   • Toshio Miyauchi

   OriginalPaper 29 July 2009 Pages: 1813 - 1820

9. Temperature measurement of microfluids with high temporal resolution by laser-induced fluorescence

   • Masahiro Motosuke
   • Dai Akutsu
   • Shinji Honami

   OriginalPaper 29 July 2009 Pages: 1821 - 1828

10. Analysis of low Reynolds number flow around a heated circular cylinder

    • László Baranyi
    • Szilárd Szabó
    • Róbert Bordás

    OriginalPaper 29 July 2009 Pages: 1829 - 1834

11. Hydraulics conveyances of mud slurry by a spiral pipe

    • Yanuar
    • Ridwan
    • Raldi A. Koestoer

    OriginalPaper 29 July 2009 Pages: 1835 - 1839

12. The effect of blade angle on the flow and pressure distributions in the vicinity of the diffuser blades of a room air conditioner

    • Hyeon-Seok Seo
    • Jin-Beak Kim
    • Youn-Jea Kim

    OriginalPaper 29 July 2009 Pages: 1840 - 1845

13. Removal of submicron aerosol particles and bioaerosols using carbon fiber ionizer assisted fibrous medium filter media

    • Jae-Hong Park
    • Ki-Young Yoon
    • Jungho Hwang

    OriginalPaper 29 July 2009 Pages: 1846 - 1851

14. Effects of injection type on slot film cooling for a ramjet combustor

    • Kwang Hoon Park
    • Kang Mo Yang
    • Ki Young Hwang

    OriginalPaper 29 July 2009 Pages: 1852 - 1857

15. A numerical study on oil retention and migration characteristics in the heat pump system

    • Jong Won Choi
    • Mo Se Kim
    • Min Soo Kim

    OriginalPaper 29 July 2009 Pages: 1858 - 1865

16. Investigation of emission characteristics affected by new cooling system in a diesel engine

    • Kyung-Wook Choi
    • Ki-Bum Kim
    • Ki-Hyung Lee

    OriginalPaper 29 July 2009 Pages: 1866 - 1870

17. Energy and exergy analysis of kalina cycle system (KCS) 34 with mass fraction ammonia-water mixture variation

    • Nasruddin
    • Rama Usvika
    • Agus Noor

    OriginalPaper 29 July 2009 Pages: 1871 - 1876

18. Numerical analysis of flow characteristics of fire extinguishing agents in aircraft fire extinguishing systems

    • Jintaek Kim
    • Byungjoon Baek
    • Jeekeun Lee

    OriginalPaper 29 July 2009 Pages: 1877 - 1884

19. The effect of chemical structure of dimethyl ether (DME) on NOx formation in nonpremixed counterflow flames

    • Tae-Hyun Kim
    • Jong-Min Kim
    • Chang-Eon Lee

    OriginalPaper 29 July 2009 Pages: 1885 - 1892

20. Development of a reduced relaxation function and comparison of stress relaxation for anatomically paired tendons

    • Keyoung Jin Chun
    • Robert P. Hubbard

    OriginalPaper 29 July 2009 Pages: 1893 - 1898

21. Optimization of mixed casting processes considering discrete ingot sizes

    • Yong Kuk Park
    • Jung-Min Yang

    OriginalPaper 29 July 2009 Pages: 1899 - 1910

22. New approach to designing an MR brake using a small steel roller and MR fluid

    • Tran Hai Nam
    • Kyoung Kwan Ahn

    OriginalPaper 29 July 2009 Pages: 1911 - 1923

23. Characteristics of complicated AISI316L automobile components manufactured by powder/metallurgy

    • L. Zhong Liang
    • L. Jin Hui
    • Y. Chun Ze

    OriginalPaper 29 July 2009 Pages: 1924 - 1931

24. Investigation of penetration force of living cell using an atomic force microscope

    • Eun-Young Kwon
    • Young-Tae Kim
    • Dae-Eun Kim

    OriginalPaper 29 July 2009 Pages: 1932 - 1938

25. Automatic simplification of solid models for engineering analysis independent of modeling sequences

    • Yoonhwan Woo

    OriginalPaper 29 July 2009 Pages: 1939 - 1948

26. Nanomechanics of biomolecules: focus on DNA

    • Y. Eugene Pak
    • Dae Shick Kim
    • Sanghyo Kim

    OriginalPaper 29 July 2009 Pages: 1949 - 1958

27. Environmentally conscious hard turning of cemented carbide materials on the basis of micro-cutting in SEM (2^nd report): stress turning with three kinds of cutting tools

    • Heo Sung Jung

    OriginalPaper 29 July 2009 Pages: 1959 - 1966

28. A rational B-spline hypervolume for multidimensional multivariate modeling

    • Sangkun Park

    OriginalPaper 29 July 2009 Pages: 1967 - 1981

29. Micro machining of an STS 304 bar by magnetic abrasive finishing

    • Ik-Tae Im
    • Sang Don Mun
    • Seong Mo Oh

    OriginalPaper 29 July 2009 Pages: 1982 - 1988