1. in the final analysis

   News 08 September 2020 Pages: 3305 - 3305

2. Congratulations to Poster Contest Winners; TMS Member Named ANS Fellow

   News 08 September 2020 Pages: 3306 - 3308

3. In Case You Missed It: Business News from the Field

   News 08 September 2020 Pages: 3309 - 3309

4. Qi An Brings Passion and Focus to Electronic and Atomistic Modeling

   News 08 September 2020 Pages: 3310 - 3310

5. Standing Together While We Stay Apart: Your 2021 TMS Membership

   News 14 September 2020 Pages: 3311 - 3311

6. Workforce Development Survey Results: Industry, Government Laboratories, Academia, and Recent Graduates

   News 11 September 2020 Pages: 3312 - 3320

7. A Roundtable Discussion: Challenges for a Sustainable Aluminum Industry and Advice for the Next Generation

   News 14 September 2020 Pages: 3321 - 3324

8. Architectural Monel: Modernism, Counter-Modernism, and the "Aesthetic of Patina"

   News 10 September 2020 Pages: 3325 - 3328

9. TMS meeting headlines

   News 08 September 2020 Pages: 3329 - 3329

10. call for papers

    News 10 September 2020 Pages: 3330 - 3331

11. Aluminum: Recycling and Carbon/Environmental Footprint

    • David S. Wong
    • Anne Kvithyld
    • Hong Peng

    Aluminum: Recycling and Carbon / Environmental Footprint 18 August 2020 Pages: 3332 - 3333

12. Developing Guidance to Support Sustainable Spent Pot Lining (SPL) Management Across the Aluminum Industry

    • Pernelle Nunez

    Aluminum: Recycling and Carbon / Environmental Footprint Open access 19 August 2020 Pages: 3334 - 3340

    

13. Phase Transformation of Hercynite During the Oxidative Roasting Process

    • Xiaobin Li
    • Hongyang Wang
    • Zhihong Peng

    Aluminum: Recycling and Carbon / Environmental Footprint 20 May 2020 Pages: 3341 - 3347

    

14. Alumina and Silica Produced by Chlorination of Power Plant Fly Ash Treatment

    • Valery Kaplan
    • Nurlan Dosmukhamedov
    • Aidar Argyn

    Aluminum: Recycling and Carbon / Environmental Footprint 24 July 2020 Pages: 3348 - 3357

    

15. Production of Alpha-Alumina from Black Aluminum Dross Using NaOH Leaching Followed by Calcination

    • Murat Türk
    • Mahmut Altıner
    • Chafia Bouchekrit

    Aluminum: Recycling and Carbon / Environmental Footprint 27 July 2020 Pages: 3358 - 3366

    

16. Mechano-Chemical Processing of Diaspore Sample for Extraction and Synthesis of Gamma-Alumina and Potash Values

    • Ashwini Kumar
    • Shrey Agrawal
    • Nikhil Dhawan

    Aluminum: Recycling and Carbon / Environmental Footprint 26 May 2020 Pages: 3367 - 3376

    

17. Syntactic Aluminum Foam from Recycled Sawing Chips

    • Gy. Thalmaier
    • N. A. Sechel
    • I. Vida-Simiti

    Aluminum: Recycling and Carbon / Environmental Footprint 24 July 2020 Pages: 3377 - 3382

    

18. Dross Formation in Aluminum Melts During the Charging of Beverage Can Scrap Bales with Different Densities Using Various Thermal Pretreatments

    • Jan Steglich
    • Bernd Friedrich
    • Marcel Rosefort

    Aluminum: Recycling and Carbon / Environmental Footprint 28 July 2020 Pages: 3383 - 3392

    

19. Influence of Ferrous Sulfide on Carbothermic Reduction of Panzhihua Ilmenite Concentrate

    • Wei Lv
    • Shiqing Zhao
    • Mansoor Barati

    High Temperature Processing of Complex Ores 29 July 2020 Pages: 3393 - 3400

    

20. Phase Equilibria and Minor Element Distributions in Complex Copper/Slag/Matte Systems

    • Svetlana Sineva
    • Maksym Shevchenko
    • Evgueni Jak

    High Temperature Processing of Complex Ores 20 August 2020 Pages: 3401 - 3409

    

21. Solar Carbothermic Reduction of Ilmenite Using Palm Kernel Shell Biomass

    • Agung Setiawan
    • Matthew Shaw
    • M. Akbar Rhamdhani

    High Temperature Processing of Complex Ores 05 August 2020 Pages: 3410 - 3421

    

22. From Ore Body to High Temperature Processing of Complex Ores: Manganese—A South African Perspective

    • Joalet Dalene Steenkamp
    • Deshenthree Chetty
    • Glen Michael Denton

    High Temperature Processing of Complex Ores 21 August 2020 Pages: 3422 - 3435

    

23. Extraction of Copper from Copper-Bearing Materials by Sulfation Roasting with SO₂-O₂ Gas

    • Xingbang Wan
    • Junjie Shi
    • Ari Jokilaakso

    High Temperature Processing of Complex Ores Open access 11 August 2020 Pages: 3436 - 3446

    

24. Processing of Complex Materials in the Copper Industry: Challenges and Opportunities Ahead

    • Gerardo Alvear Flores
    • Carlos Risopatron
    • Joe Pease

    High Temperature Processing of Complex Ores 06 July 2020 Pages: 3447 - 3461

    

25. Evaluation of Titania-Rich Slag Produced from Titaniferous Magnetite Under Fluxless Smelting Conditions

    • I. J. Geldenhuys
    • Q. G. Reynolds
    • G. Akdogan

    High Temperature Processing of Complex Ores Open access 03 August 2020 Pages: 3462 - 3471

    

26. Ultrasonic Vibration-Strengthened Adhesive Bonding of CFRP/Aluminum Alloy Joints with Anodizing Pretreatment

    • Hui Wang
    • Cheng Gao
    • Lin Hua

    Interfacial Stability in Multi-component Systems 24 July 2020 Pages: 3472 - 3482

    

27. Density Functional Theory Analysis of the Adsorption Behavior of C₄ and Cl₂ on the TiO₂ (110) Surface

    • Liangying Wen
    • Jie Qin
    • Zhongqing Yang

    Interfacial Stability in Multi-component Systems 05 August 2020 Pages: 3483 - 3490

    

28. Liberation Mechanism of Uranium from Radioactive Metallurgical Waste Containing Uranium by a Clean Leaching Method

    • Fangying Gao
    • Mi Li
    • Qi Fang

    Interfacial Stability in Multi-component Systems 22 July 2020 Pages: 3491 - 3501

    

29. Kinetics of Reverted Austenite in 18 wt.% Ni Grade 300 Maraging Steel: An In-Situ Synchrotron X-Ray Diffraction and Texture Study

    • Luis Paulo Mourão dos Santos
    • Miloslav Béreš
    • Hamilton Ferreira Gomes de Abreu

    Interfacial Stability in Multi-component Systems 06 July 2020 Pages: 3502 - 3512

    

30. Clean and SO₂-Free Method for Bismuth Extraction from Bismuthinite by Multiphase Roasting: Thermodynamic Equilibria and Reaction Mechanisms

    • Longgang Ye
    • Ping Wen
    • Zhimei Xia

    Interfacial Stability in Multi-component Systems 23 June 2020 Pages: 3513 - 3520

    

31. Influence of Interface Electric Field on Wettability Between Molten Iron and Submerged Entry Nozzle Interface

    • Xin Yang
    • Yuanyuan Zhang
    • Zhijun He

    Interfacial Stability in Multi-component Systems 02 June 2020 Pages: 3521 - 3528

    

32. Surface Silanization of Polyimide for Autocatalytic Metallization

    • Jun-Nan Liu
    • Manik Chandra Sil
    • Chih-Ming Chen

    Interfacial Stability in Multi-component Systems 27 July 2020 Pages: 3529 - 3537

    

33. Formation of a Diffusion Barrier-Like Intermetallic Compound to Suppress the Formation of Micro-voids at the Sn-0.7Cu/Cu Interface by Optimal Ga Additions

    • Ting-Li Yang
    • Yu-chen Liu
    • Shih-kang Lin

    Interfacial Stability in Multi-component Systems 03 August 2020 Pages: 3538 - 3546

    

34. Preparation of 2024-Al/AZ31-Mg Laminated Composite by Powder Metallurgy Integrated Forming and Sintering

    • Tao Wang
    • Yufeng Huang
    • Wensheng Liu

    Interfacial Stability in Multi-component Systems 04 August 2020 Pages: 3547 - 3557

    

35. Liquid-State Interfacial Reactions of Sn and Sn-Ag-Cu Solders with p-Type (Bi,Sb)₂Te₃ Thermoelectric Material

    • Chao-hong Wang
    • Mei-hau Li
    • Xin-He Wang

    Interfacial Stability in Multi-component Systems 27 July 2020 Pages: 3558 - 3566

    

36. Honoring Practical Processing Science at TMS 2020

    • Adam Pilchak

    Practical Research in Processing Science 08 September 2020 Pages: 3567 - 3569

    

37. Development of Aerospace Materials Using Integrated Numerical and Physical Simulation

    • Bruce F. Antolovich
    • Anthony Banik
    • Ramesh S. Minisandram

    Practical Research in Processing Science 18 August 2020 Pages: 3570 - 3581

    

38. Investigating Mechanical and Corrosion Behavior of Plain and Reinforced AA1050 Sheets Fabricated by Friction Stir Processing

    • Vinayak R. Malik
    • Padmakumar A. Bajakke
    • Anand S. Deshpande

    Practical Research in Processing Science 14 August 2020 Pages: 3582 - 3593

    

39. An Expanded Martensite Variant Selection Theory Accounting for Transformation Rotations and Applied Stress Fields: Predictions of Variant Clusters in Titanium

    • Zach D. Brunson
    • Adam L. Pilchak
    • Aaron P. Stebner

    Practical Research in Processing Science 25 August 2020 Pages: 3594 - 3607

    

40. Solidification Behavior in the Presence of External Fields: Part I

    • Lang Yuan
    • Andrew Kao

    Solidification Behavior in the Presence of External Fields 26 August 2020 Pages: 3608 - 3609

41. Electromagnetic Effects on Solidification Defect Formation in Continuous Steel Casting

    • Seong-Mook Cho
    • Brian G. Thomas

    Solidification Behavior in the Presence of External Fields 03 September 2020 Pages: 3610 - 3627

    

42. Effect of Electromagnetic Stirring on the Solidification Behavior of High-Magnetic-Induction Grain-Oriented Silicon Steel Continuous Casting Slab

    • Xin Li
    • Xianhui Wang
    • Min Wang

    Solidification Behavior in the Presence of External Fields 11 February 2020 Pages: 3628 - 3633

    

43. Improvement of Spatial Inhomogeneity of Solute Elements and Mechanical Properties of Twin-Roll Cast Al-Mg-Si Alloy in Presence of Electromagnetic Fields

    • C. He
    • S. J. Li
    • D. Wu

    Solidification Behavior in the Presence of External Fields 21 July 2020 Pages: 3634 - 3644

    

44. Magnetic Effects on Microstructure and Solute Plume Dynamics of Directionally Solidifying Ga-In Alloy

    • Andrew Kao
    • Natalia Shevchenko
    • Koulis Pericleous

    Solidification Behavior in the Presence of External Fields Open access 19 August 2020 Pages: 3645 - 3651

    

45. Visible Observation and Formation Mechanism of Porous TiAl₃ Intermetallics During the Continuous Sintering Process

    • Xinyang Jiao
    • Xuanru Ren
    • Peizhong Feng

    Technical Article 07 August 2020 Pages: 3652 - 3660

    

46. Microstructure of Biodegradable Zn-Fe Alloys and Mechanical and Corrosion Properties

    • Jiajia Lin
    • Yuxiang Wang
    • Huinan Liu

    Technical Article 25 August 2020 Pages: 3661 - 3671

    

47. Phase and Microstructural Evolution of Calcium Aluminum Phosphate Cement for Potential Biological Applications: Effect of Aluminum Hydroxide Sources

    • Reyhaneh Goodarzi
    • Hajar Ghanbari
    • Hossein Sarpoolaky

    Technical Article 03 August 2020 Pages: 3672 - 3682

    

48. Synthesis, Characterization, and In Vitro Biochemical Analysis of Hydroxyapatite–Bioglass^® Composite Scaffolds for Bone Tissue Repair

    • Muhammad Rizwan
    • Sumra Yousuf
    • Wan Jeffrey Basirun

    Technical Article 24 July 2020 Pages: 3683 - 3692

    

49. Effects of Micron/Submicron TiC on Additively Manufactured AlSi10Mg: A Comprehensive Study from Computer Simulation to Mechanical and Microstructural Analysis

    • S. Y. Zhou
    • Z. Y. Wang
    • M. Yan

    Technical Article 08 January 2020 Pages: 3693 - 3704

    

50. Correction to: Selective Laser Melting of Al_0.3CoCrFeNi High Entropy Alloy: Printability, Microstructure, and Mechanical Properties

    • Florian Peyrouzet
    • Dorian Hachet
    • Stéphane Gorsse

    Correction 15 April 2020 Pages: 3705 - 3705