JOM - Free Access to Editor's Choice Articles
All of these articles are free to read on SpringerLink
2024
Advances in Experimental Studies of Grain Growth in Thin Films (this opens in a new tab)
2023
Phase Stability During High-Temperature Oxidation (this opens in a new tab)
A Physically Based Model for Soft Magnets’ Anhysteretic Curve (this opens in a new tab)
Synchrotron x-Ray Study of Heterostructured Materials: A Review (this opens in a new tab)
A Hybrid Rotor Design with Reduced Rare Earth Magnets for Traction Motors (this opens in a new tab)
2022
Improving Tapping Experience—and Why to Choose a Comprehensive Approach (this opens in a new tab)
Influence of Hold Time on Dwell Fatigue Behavior in IMI834 Disc Forging (this opens in a new tab)
Interactive Exploration of High-Dimensional Phase Diagrams (this opens in a new tab)
Assessment of Outliers in Alloy Datasets Using Unsupervised Techniques (this opens in a new tab)
Fused Filament Fabrication on the Moon (this opens in a new tab)
2021
Gaps and Barriers to Successful Integration and Adoption of Practical Materials Informatics Tools and Workflows (this opens in a new tab)
Microstructure Generation via Generative Adversarial Network for Heterogeneous, Topologically Complex 3D Materials (this opens in a new tab)
Fe Thin Film Coated Optics for Corrosion Monitoring: Optical and Electrochemical Studies (this opens in a new tab)
Production Strategy for Manufacturing Large-Scale AlSi10Mg Components by Laser Powder Bed Fusion (this opens in a new tab)
A Review: Understanding the Science and the Impacts of Impurities upon the Electrolytic Bath of Hall–Héroult Reduction Cells (this opens in a new tab)
Review: Magnesium Sheet Alloy Development for Room Temperature Forming (this opens in a new tab)
Biotemplating of a Highly Porous Cellulose–Silica Composite from Apium graveolens by a Low-Toxicity Sol–Gel Technique (this opens in a new tab)
Automated Image Processing Workflow for Morphological Analysis of Fluorescence Microscopy Cell Images (this opens in a new tab)
Refining of Secondary Aluminum: Important Chemical Factors (this opens in a new tab)
Alternating-Current Electrophoretic Deposition of Spinel Coatings on Porous Metallic Substrates for Solid Oxide Fuel Cell Applications (this opens in a new tab)
Development of Aerospace Materials Using Integrated Numerical and Physical Simulation (this opens in a new tab)
Review and Preliminary Investigation into Fuel Loss from Cermets Composed of Uranium Nitride and a Molybdenum-Tungsten Alloy for Nuclear Thermal Propulsion Using Mesoscale Simulations (this opens in a new tab)
A Multi-modal Data Merging Framework for Correlative Investigation of Strain Localization in Three Dimensions (this opens in a new tab)
Carbide-Free Bainite Transformations Above and Below Martensite Start Temperature Investigated by In-Situ High-Energy X-Ray Diffraction (this opens in a new tab)
Manufacturability of Ti-Al-4V Hollow-Walled Lattice Struts by Laser Powder Bed Fusion (this opens in a new tab)
Demonstration of a High-Throughput Tensile Testing Technique Using Femtosecond Laser-Fabricated Tensile Bars in AISI 316 and Additively Manufactured Grade 91 Steel (this opens in a new tab)
Additive Manufacturing of NiTi Shape Memory Alloy for Biomedical Applications: Review of the LPBF Process Ecosystem (this opens in a new tab)
2020
Joining Technologies for Metal Additive Manufacturing in the Energy Industry (this opens in a new tab)
Machine Learning-Aided Parametrically Homogenized Crystal Plasticity Model (PHCPM) for Single Crystal Ni-Based Superalloys (this opens in a new tab)
Laser Powder Bed Fusion Parameter Selection via Machine-Learning-Augmented Process Modeling (this opens in a new tab)
Multiscale modelling of defect phenomena in Platinum using machine learning of force fields (this opens in a new tab)
Recent Advances in Mitigation of Whiskers from Electroplated Tin (this opens in a new tab)
Influence of Gas Flow Speed on Laser Plume Attenuation and Powder Bed Particle Pickup in Laser Powder Bed Fusion (this opens in a new tab)
Helical and Bouligand Porous Scaffolds Fabricated by Dynamic Low Strength Magnetic Field Freeze Casting (this opens in a new tab)
Cryogenic Stress-Driven Grain Growth Observed via Microcompression with in situ Electron Backscatter Diffraction (this opens in a new tab)
A Brief Review of Fly Ash as Reinforcement for Composites with Improved Mechanical and Tribological Properties (this opens in a new tab)
Isothermal Continuous Equal Channel Angular Pressing of Magnesium Alloy AZ31 (this opens in a new tab)
Cold Spray Deposition of Thermoelectric Materials (this opens in a new tab)
Powder Casting: Producing Bulk Metal Components from Powder Without Compaction (this opens in a new tab)
Electromagnetic Effects on Solidification Defect Formation in Continuous Steel Casting (this opens in a new tab)
Dross Formation in Aluminum Melts During the Charging of Beverage Can Scrap Bales with Different Densities Using Various Thermal Pretreatments (this opens in a new tab)
Rate Theory Model of Irradiation-Induced Solute Clustering in b.c.c. Fe-Based Alloys (this opens in a new tab)
Influence of Induced Convection on Transformation Kinetics During Rapid Solidification of Steel Alloys: The Retained Damage Model (this opens in a new tab)
2019
The Effect of Cooling Rate on High-Temperature Precipitation in a Powder-Metallurgy, Gamma/Gamma-Prime Nickel-Base Superalloy (this opens in a new tab)
From Wire to Seamless Flow-Formed Tube: Leveraging the Combination of Wire Arc Additive Manufacturing and Metal Forming (this opens in a new tab)
Characterization of Additive Manufacturing for Process Tubing (this opens in a new tab)
Powder Recycling Effects on the Tensile and Fatigue Behavior of Additively Manufactured Ti-6Al-4V Parts (this opens in a new tab)
The Interface Between Degradable Mg and Tissue (this opens in a new tab)
Repeatedly Applied Peptide Film Kills Bacteria on Dental Implants (this opens in a new tab)
Strain Rate Dependent Mechanical Properties of TWIP Steel (this opens in a new tab)
Anatase TiO2 Nanotubes-Aggregated Porous Microspheres for Ti Foil-Based Quasi-Solid State Dye-Sensitized Solar Cells with Improved Photo-voltaic Performance (this opens in a new tab)
Recent development of graphene-based ink and other conductive-material-based inks for flexible electronics (this opens in a new tab)
In Situ Study of the Stress Relaxation During Aging of Nickel-Base Superalloy Forgings (this opens in a new tab)
Alloy Design and Processing Design of Magnesium Alloys Using 2nd Phases (this opens in a new tab)
Benchmark for Tap-Hole Lifecycle Management Practices in Silicomanganese Production When Submerged Arc Furnace Technology of Circular Design is Applied (this opens in a new tab)
Predicting Microstructure-Sensitive Fatigue-Crack Path in 3D Using a Machine Learning Framework (this opens in a new tab)
Development of Fe-9Cr Alloy via High-Energy Ball Milling and Spark Plasma Sintering (this opens in a new tab)
Advanced Manufacturing for Nuclear Energy (this opens in a new tab)
Multiscale Computational Strategies for Heterogeneous Materials with Defects: Coupling Modeling with Experiments and Uncertainty Quantification (this opens in a new tab)
The Sandy Desilication Product Process Concept (this opens in a new tab)
Selective Laser Melting of Al0.3CoCrFeNi High-Entropy Alloy: Printability, Microstructure, and Mechanical Properties (this opens in a new tab)
Integrated Simulation Framework for Additively Manufactured Ti-6Al-4V: Melt Pool Dynamics, Microstructure, Solid-State Phase Transformation, and Microelastic Response (this opens in a new tab)
Characterization of Plastic Deformation in Lath Martensitic Steel by Micro-pillar Compression Focused on Sub-block and Lath Boundaries (this opens in a new tab)
Improved Tolerance of Lanthanum Nickelate (La2NiO4+δ) Cathodes to Chromium Poisoning Under Current Load in Solid Oxide Fuel Cells (this opens in a new tab)
Phonon Transport Across Coherent and Incoherent Interfaces (this opens in a new tab)
Packing Changes in Melting, Freezing, and Coalescence of Titanium Nanoparticles from Atomic Simulations (this opens in a new tab)
Disassembly Automation for Recycling End-of-Life Lithium-Ion Pouch Cells (this opens in a new tab)
A Study on the Performance of Dye Sensitized Solar Cells Using Extract from Wrightia tinctoria R.Br. as Photosensitizers (this opens in a new tab)
2018
Integrating Fiber Optic Strain Sensors into Metal Using Ultrasonic Additive Manufacturing (this opens in a new tab)
Achieving Functionally Graded Material Composition Through Bicontinuous Mesostructural Geometry in Material Extrusion Additive Manufacturing (this opens in a new tab)
Effects of Testing Method on Stretch-Flangeability of Dual-Phase 980/1180 Steel Grades (this opens in a new tab)
Data-Driven Correlation Analysis Between Observed 3D Fatigue-Crack Path and Computed Fields from High-Fidelity, Crystal-Plasticity, Finite-Element Simulations (this opens in a new tab)
Damascus Steel Revisited (this opens in a new tab)
Corrosion of Structural Alloys in High-Temperature Molten Fluoride Salts for Applications in Molten Salt Reactors (this opens in a new tab)
Nanoscale Solute Partitioning and Carbide Precipitation in a Multiphase TRIP Steel Analyzed by Atom Probe Tomography (this opens in a new tab)
A Review of Nanoporous Metals in Interconnects (this opens in a new tab)
Redefining the β-Phase Stability in Ti-Nb-Zr Alloys for Alloy Design and Microstructural Prediction (this opens in a new tab)
PRISMS: An Integrated, Open-Source Framework for Accelerating Predictive Structural Materials Science (this opens in a new tab)
Variables Applicable to Benchmarking of Tap-Hole Life-Cycle Management Practices in Coke-Bed-Based Ferroalloy Production (this opens in a new tab)
Application of ICME to Engineer Fatigue-Resistant Ni-Base Superalloys Microstructures (this opens in a new tab)
Corrosion Characteristics of Laser-Engineered Net Shaping Additively-Manufactured 316L Stainless Steel (this opens in a new tab)
Removal of Antimony and Bismuth from Copper Electrorefining Electrolyte: Part II—An Investigation of Two Proprietary Solvent Extraction Extractants (this opens in a new tab)
Numerical Assessment of a Filtration Experiment Influenced by Microscale Carbon Monoxide Bubbles Arising in Steel Melt (this opens in a new tab)
2017
Mechanical Characterization of Mesoscale Interfaces Using Indentation Techniques (this opens in a new tab)
Airborne Emissions from Si/FeSi Production (this opens in a new tab)
Computer Vision and Machine Learning for Autonomous Characterization of AM Powder Feedstocks (this opens in a new tab)
Strategy for Texture Management in Metals Additive Manufacturing (this opens in a new tab)
Effect of Pre-annealing on Sintering of Stainless Steel Fiber Felt (this opens in a new tab)
Identifying Structure–Property Relationships Through DREAM.3D Representative Volume Elements and DAMASK Crystal Plasticity Simulations: An Integrated Computational Materials Engineering Approach (this opens in a new tab)
Submerged Gas Jet Penetration: A Study of Bubbling Versus Jetting and Side Versus Bottom Blowing in Copper Bath Smelting (this opens in a new tab)
An Industrial Perspective on Environmentally Assisted Cracking of Some Commercially Used Carbon Steels and Corrosion-Resistant Alloys (this opens in a new tab)
Toward Low-Cost, High-Energy Density, and High-Power Density Lithium-Ion Batteries (this opens in a new tab)
Crystallographic Orientation Effect on Electromigration in Ni-Sn Microbump (this opens in a new tab)
Review of the Methods for Production of Spherical Ti and Ti Alloy Powder (this opens in a new tab)
A Comparative Study of Electrolyte Flow and Slime Particle Transport in a Newly Designed Copper Electrolytic Cell and a Laboratory-Scale Conventional Electrolytic Cell (this opens in a new tab)
Strong and ductile non-equiatomic high-entropy alloys: Design, processing, microstructure and mechanical properties (this opens in a new tab)
High entropy alloys - a current evaluation of founding ideas, core effects and exploring 'non-linear alloys' (this opens in a new tab)
Criticality in Bulk Metallic Glass Constituent Elements (this opens in a new tab)
Nanocrystalline Aluminum Truss Cores for Lightweight Sandwich Structures (this opens in a new tab)
New Development in Selective Laser Melting of Ti–6Al–4V: A Wider Processing Window for the Achievement of Fully Lamellar α + β Microstructures (this opens in a new tab)