Articles

1. Preparation for High-Frequency Soft Magnetic Composites with Carbonyl FeNi50

   • Jian Luo
   • Fei Shi
   • Shihai Guo

   New Insights into Processing and Manufacturing of Magnetic Materials 26 April 2024

   

2. Influence Mechanism of Sn on 2.7%Si-0.5%Al Non-oriented Silicon Steel

   • Hai-jun Wang
   • Kai-xuan Shao
   • Sheng-tao Qiu

   New Insights into Processing and Manufacturing of Magnetic Materials 26 April 2024

   

3. Cationic Effects of Calcium, Ferrous and Magnesium on Dephosphorization Ability of CaO-SiO₂-FeO-MgO Slag System

   • Rui Zhang
   • Yi Min
   • Zhenlei Cai

   Technical Article 26 April 2024

   

4. Enhanced Mechanical Properties and Wear Resistance of FeCrAl Alloys at ~ 300°C and Higher Temperatures

   • Evan J. Dolley
   • Wanming Zhang
   • Raul B. Rebak

   Environmental Degradation of High Temperature Structural Materials Open access 24 April 2024

   

5. Enhancement of Cobalt Bismuth Nano-Ferrite via Heat Treatment to be Applied in High-Frequency and Antimicrobial Applications

   • Asmaa. A. H. El-Bassuony
   • R. S. Hafez
   • H. K. Abdelsalam

   Advanced Functional and Structural Thin Films and Coatings Open access 24 April 2024

   

6. Grain Boundary Precipitation and Self-Organization in Two-Phase Alloys Under Irradiation: Phase Field Simulations and Experiments in Al-Sb

   • G. F. Bouobda Moladje
   • S. Das
   • P. Bellon

   Nanostructured Materials in Extreme Environments 24 April 2024

   

7. Correlation Between Microstructure and Tensile Properties in TC18 Alloy with Lamella Structure

   • Wengung Zhu
   • Qiang Ma
   • Tingchuan Shu

   Technical Article 24 April 2024

   

8. Effect of Heat Treatment on Corrosion Properties of Ti-6Al-4V Titanium Alloy Produced by Electron Powder Bed Fusion

   • Junyuan Huang
   • Wei Zhang
   • Weiping Fang

   Technical Article 23 April 2024

   

9. A Study on Stepped Clinching of AA5052/1060 Dissimilar Aluminum Alloy Sheets: Process, Joint Configuration, and Strength

   • Zongkai Fan
   • Chao Chen

   Technical Article 23 April 2024

   

10. Homogeneous Growth of 3C-SiC Crystal Surface at Solid–Liquid Interface and Its Competitive Relationship

    • Tinghong Gao
    • Guiyang Liu
    • Qingquan Xiao

    Materials Processing and Kinetic Phenomena: In Honor of Carl V. Thompson 23 April 2024

    

11. A Phenomenological Model for Interstitial Hydrogen Absorption in Niobium

    • Arvind Ramachandran
    • Houlong Zhuang
    • Klaus S. Lackner

    Technical Article 23 April 2024

    

12. Enhanced Supercapacitive Performance of FeAl₂O₄ Nanoparticles with Neodymium (Nd) Doping by Sonication Method

    • Mukhtiar Hussain
    • Meznah M. Alanazi
    • Hafiz Muhammad Tahir Farid

    Technical Article 22 April 2024

    

13. Photoelectric Properties of SZO/p-GaAs Heterojunction Solar Cells

    • M. Manoua
    • N. Al Armouzi
    • A. Liba

    Advanced Functional and Structural Thin Films and Coatings 22 April 2024

    

14. Effect of TiO₂ on the Phase Transformation and Microstructure Evolution of Ti-Containing Melting Slag in the Alkali Fusion Process

    • Jing Ma
    • Wei Li
    • Miaoyong Zhu

    Technical Article 22 April 2024

    

15. Technology Optimization Analysis of Three-Roll Rotary Piercing Process for Seamless Steel Pipe

    • Hao Liu
    • Qiang Li
    • Chunlei Shen

    Characterization Techniques and Methods for Low-Carbon Metallurgical Processes 22 April 2024

    

16. Finite Element Modeling of the Phase Change in Thermally-Grown SiO₂ in SiC Systems for Gas Turbines

    • Trevor G. Aguirre
    • Lianshan Lin
    • Bruce A. Pint

    Environmental Degradation of High Temperature Structural Materials 22 April 2024

    

17. Refinement of Large Primary Carbides by Adjusting Annealing Parameters in 45Cr9Si3 Valve Steel

    • Zeyou Li
    • Dongfeng Liu
    • Jin Ai

    Thermo-mechanical Processing of Steels for Sustainable Energy Utilization 22 April 2024

    

18. A Clean Process for the Recovery of Potash Fertilizer from Glauconitic Rock via Hydrogen Gas Pre-treatment and Mild Acid Leaching

    • Saurabh Shekhar
    • V. Kumari
    • K. K. Sahu

    Characterization Techniques and Methods for Low-Carbon Metallurgical Processes 19 April 2024

    

19. Effect of Ti Content on Microstructure Evolution and Mechanical Properties of High-Strength Anti-seismic Rebar

    • Chao Lu
    • Shubiao Yin
    • Jianchun Cao

    "Phase Transformation and Microstructure Evolution during Thermomechanical Processing 18 April 2024

    

20. Recovery of Vanadium from Rapid-Cooling Converter Vanadium Slag by Sodium Roasting and Water Leaching

    • Jin Ma
    • Baozhong Ma
    • Guosheng Feng

    Sustainable Recovery of Refractory and Photovoltaic Metals 18 April 2024

    

21. Effects of Process Parameters on the Accuracy of Directed Energy Deposition-Arc Lattice Structures

    • Bo Zheng
    • Shengfu Yu
    • Xiaohao Meng

    Technical Article 18 April 2024

    

22. A Comparative Study of Laser Additive Manufacturing of Ni-Base Superalloy and Low-Alloy High-Strength Steel

    • Hailong Cheng
    • Zhihao Han
    • Xin Wu

    Advanced Characterization of Additively Manufactured Materials 18 April 2024

    

23. Construction and Electrochemical Properties of Preferred Crystal Face (002) on Zn Anode Surface

    • Weishun Li
    • Hong Yun
    • Qunjie Xu

    Advanced Functional and Structural Thin Films and Coatings 18 April 2024

    

24. Microwave Anaerobic Thermal Removal of Bromine from Copper-Containing Glass Fiber Resin

    • Chengfei Liu
    • Chunyu Li
    • Libo Zhang

    Technical Article 17 April 2024

    

25. Effect of Orifice Position on Bubble Aggregation and Coalescence in Dynamic Rotating Flow

    • Lianyu Wang
    • Xiaoming Liu
    • Lianghua Feng

    Melt Refining, Solidification, and Downstream Processing to Mitigate Casting Defects 17 April 2024

    

26. Thin Film NiCr-, TiCr- and CuNi-Based Cermets for Low-Temperature Ultra-Low Magnetoresistance Thermometers

    • J. E. Palmer-Fortune
    • N. A. Fortune
    • A. Rydh

    Materials Processing and Kinetic Phenomena: In Honor of Carl V. Thompson 17 April 2024

    

27. Modeling of Casting Deformation Prediction During Investment Casting Based on Geometry Dependence

    • Yali Zhang
    • Kun Bu
    • Congle Liu

    Melt Refining, Solidification, and Downstream Processing to Mitigate Casting Defects 17 April 2024

    

28. Laser Treatment of Electrospark-Deposited Ti_0.8W_0.25Cr_0.5FeCo_1.75Ni₃AlB_0.6 High-Entropy Coatings

    • Oleksandr Myslyvchenko
    • Roman Lytvyn
    • Anatoliy Stegniy

    Advanced Functional and Structural Thin Films and Coatings 17 April 2024

    

29. Corrosion Behaviour of HVOF-Sprayed CoCrNi Coating on Copper Alloy Surface in NaCl Solution

    • Haitao Yu
    • Zhenlin Xu
    • Xiquan Jia

    Technical Article 17 April 2024

    

30. Cyclic Oxidation and Hot-Corrosion Behavior of HVOF-Sprayed NiCrAl Coating on Industrial Boiler Tube Steels

    • M. R. Ramesh
    • Subbarao Medabalimi
    • Shrishail B. Sollapur

    Technical Article 17 April 2024

    

31. Lubricated Wear Properties of Zn-30Al-3Cu-Si Alloys

    • Temel Savaşkan
    • Hasan Onur Tan

    Alloy Microstructural Design for Wear Resistance Open access 16 April 2024

    

32. A Study on the Correlation of Liquid Kinetic and Thermodynamic Distribution Mapping

    • Yangyang Zhang
    • Qing Zhang

    Materials Processing and Kinetic Phenomena: In Honor of Carl V. Thompson 16 April 2024

    

33. Towards Thallium Flows in China and Thallium Safety Utilization

    • Xiangyu Shi
    • Yong Geng

    Technical Article 16 April 2024

    

34. Anodic Behavior of Ni₄₈Fe₄₇Cu₅ and Ni₄₂Fe₃₈Cu₂₀ in Potassium-Rich NaF-KF-AlF₃-Al₂O₃ Melts

    • Sai Krishna Padamata
    • Kamaljeet Singh
    • Gudrun Saevarsdottir

    Aluminum: Eliminating GHG Emissions 15 April 2024

    

35. Effect and Role of NaCl in Na₂SO₄ Deposits on the 900°C Hot Corrosion of a 2nd-Generation Ni-based Superalloy

    • Preston Nguyen
    • Douglas Konitzer
    • Brian Gleeson

    Environmental Degradation of High Temperature Structural Materials 15 April 2024

    

36. Hot Forward-Extruded Nanocrystalline Anisotropic Nd-Fe-B Magnetic Sheets with High Magnetic Properties

    • Liyun Zheng
    • Lin Yue
    • Wei Li

    Phase Transformation and Microstructure Evolution during Thermomechanical Processing 15 April 2024

    

37. Decoupling the Effects of Strain Rate and Temperature Rise on Martensitic Transformation in a 316 Austenitic Stainless Steel

    • Dianqiang Shu
    • Huanran Wang
    • Wenshuai Yang

    Phase Transformation and Microstructure Evolution during Thermomechanical Processing 15 April 2024

    

38. Holistic Processing of Sawdust to Enable Sustainable Hybrid Li-Ion Capacitors

    • Xiaoyang Guo
    • Dick van de Kleut
    • Steven Boles

    Materials Processing and Kinetic Phenomena: In Honor of Carl V. Thompson Open access 15 April 2024

    

39. Study on the Quenching Hydration of Calcined Hydromagnesite and the Dissolving Properties of the Hydrated Products

    • Xiaojia Tang
    • Hui Zhang
    • Yimin Zhu

    Characterization Techniques and Methods for Low-Carbon Metallurgical Processes 15 April 2024

    

40. Uncertainty Analysis for Ferromagnetic-Paramagnetic Phase Transition Behavior of Magnetic Materials

    • Zekeriya Ender Eger
    • Pinar Acar

    Uncertainty Quantification and Design under Uncertainty for Metallic Systems Open access 15 April 2024

    

41. Investigation into the Influencing Factors of the Center Magnetic Force of Anisotropic Permanent Ferrite Magnets in Motor Stator Application

    • Chih-Liang Chien
    • Ching-Chien Huang
    • Chi-Ping Lee

    New Insights into Processing and Manufacturing of Magnetic Materials 12 April 2024

    

42. Novel Synthesis of CuW Composite Containing Micro- and Nano-tungsten Particles Coated with Si_xW_y Phase via Silicothermic Coupling with Aluminothermic Reduction

    • Chu Cheng
    • Meng-En Zhang
    • Yu-Lai Song

    Characterization Techniques and Methods for Low-Carbon Metallurgical Processes 12 April 2024

    

43. Modeling of the Sump Profile During DC and MC-DC Casting Based on a Functional Packing Fraction

    • Kangcai Yu
    • Yongfu Wu
    • Hu-Tian Li

    Melt Refining, Solidification, and Downstream Processing to Mitigate Casting Defects 11 April 2024

    

44. Investigation of Demagnetization Effect on C-Shape Anisotropic Ferrite Permanent Magnet

    • Chih-Liang Chien
    • Ching-Chien Huang
    • Chi-Ping Lee

    New Insights into Processing and Manufacturing of Magnetic Materials 10 April 2024

    

45. A New Method of Neodymium-Iron-Boron Magnets/Reduced Graphene Oxide Manufacturing Without a Controlled Atmosphere

    • J. C. Silva Filho
    • S. C. Silva
    • M. T. Escote

    Technical Article 10 April 2024

    

46. The Effect of the Percentage of Mg on the Properties of Cu-Mg Alloys Manufactured by Horizontal Continuous Casting Process

    • Paweł Strzępek
    • Małgorzata Zasadzińska
    • Piotr Osuch

    Technical Article 10 April 2024

    

47. Evolution of Surface Roughness of Wrought and Additively Manufactured Inconel 718 During Centrifugal Disc Finishing

    • Mustafa Rifat
    • Edward DeMeter
    • Saurabh Basu

    Alloy Microstructural Design for Wear Resistance 10 April 2024

    

48. Material Formulation of Strontium Ferrite Permanent Magnets from Phase Diagrams and Microstructures

    • Ching-Chien Huang
    • Min-Chih Chen
    • Chi-Ping Lee

    New Insights into Processing and Manufacturing of Magnetic Materials 05 April 2024

    

49. Hot Deformation Characteristics of GH4975 Nickel-Based Superalloy in the Coexistence Region of γ and γ′ Phases

    • Yushuo Li
    • Yanwu Dong
    • Zhiwen Hou

    Phase Transformation and Microstructure Evolution during Thermomechanical Processing 05 April 2024

    

50. Comparative Study of Oxidation Behavior of Cr₂O₃ Dispersed W-Zr Alloys at 800°C, 1000°C and 1200°C Fabricated Using Powder Metallurgy

    • Bappa Das
    • Vadla Suman
    • Anshuman Patra

    Technical Article 04 April 2024