1. Announcing the JTST 2021 Editor’s Choice Selections

   Editorial 22 February 2022 Pages: 329 - 330

   

2. Preparation, Microstructure and Thermal Properties of Y₂O₃ Hollow-Sphere Composite Films

   • YanXin Dan
   • Atsushi Nakamura
   • Hua Li

   Review 06 January 2022 Pages: 331 - 341

   

3. Advances in Thermally Sprayed WC-Based Wear-Resistant Coatings: Co-free Binders, Processing Routes and Tribological Behavior

   • Kaveh Torkashvand
   • Shrikant Joshi
   • Mohit Gupta

   Review Open access 02 March 2022 Pages: 342 - 377

   

4. Life Cycle Assessment of a Thermal Sprayed Al₂O₃-NiCr Resistive Heating Coating for Pipe Freeze Protection

   • Zeynab Yousefzadeh
   • Milad Rezvani Rad
   • Shannon M. Lloyd

   Peer Reviewed 04 January 2022 Pages: 378 - 395

   

5. Porous APS YSZ TBC Manufactured at High Powder Feed Rate (100 g/min) and Deposition Efficiency (70%): Microstructure, Bond Strength and Thermal Gradients

   • Rogerio S. Lima

   Peer Reviewed Open access 04 January 2022 Pages: 396 - 414

   

6. A Comparison Study of the Friction and Wear Behavior of Nanostructured Al₂O₃-YSZ Composite Coatings With and Without Nano-MoS₂

   • Junfeng Gou
   • Maotong Sun
   • Xiaofeng Zhang

   Peer Reviewed 11 February 2022 Pages: 415 - 428

   

7. Suspension HVOF Sprayed Ytterbium Disilicate Environmental Barrier Coatings

   • Dianying Chen

   Peer Reviewed 11 February 2022 Pages: 429 - 435

   

8. Effect of Critical Plasma Spray Parameters on Microstructure and Mechanical Properties of Plasma-Sprayed YSZ-20 wt%LSM Composite Coating

   • Jindong Zhang
   • Wenzhi Huang
   • Xizhi Fan

   Peer Reviewed 10 January 2022 Pages: 436 - 448

   

9. Effect of Melting Behavior of Al₂O₃ Powder on the Structure and Dielectric Properties of Plasma-Sprayed Coatings

   • Zhenyu Bu
   • Xiaoqin Zhao
   • Huidi Zhou

   Peer Reviewed 16 February 2022 Pages: 449 - 461

   

10. Crystallization Behavior of Novel Al₂O₃-YAG Amorphous Ceramic Coating Deposited by Atmospheric Plasma Spraying

    • Zheyi Zhang
    • Kai Yang
    • Shunyan Tao

    Peer Reviewed 17 February 2022 Pages: 462 - 476

    

11. Coercivity Enhancement of Sintered Nd-Fe-B Magnets by Diffusing Tb₄O₇ Based on Suspension Plasma Spraying

    • Pengxiang Zhao
    • Yu Bai
    • Qiang Wang

    Peer Reviewed 28 January 2022 Pages: 477 - 484

    

12. Numerical Predictions of the Influence of Structure on Thermal Shock Resistance of CuAl-Polyester Abradable Sealing Coating

    • Wei Sun
    • Peixuan Ouyang
    • Jinhe Yang

    Peer Reviewed 22 February 2022 Pages: 485 - 497

    

13. Heterogeneous Distribution of Mechanical Properties of Single-Particle Cold Spray Impacts

    • A. A. Hemeda
    • A. Mishra
    • Y. Ma

    Peer Reviewed 09 March 2022 Pages: 498 - 507

    

14. A Modeling Study of Bonding Mechanisms Between Similar and Dissimilar Materials in Cold Spraying on Polymeric Substrates

    • Nand Kishore Singh
    • Kazi Zahir Uddin
    • Behrad Koohbor

    Peer Reviewed 11 February 2022 Pages: 508 - 524

    

15. Artificial Neural Networks Approach for Hardness Prediction of Copper Cold Spray Laser Heat Treated Coatings

    • Maryam Razavipour
    • Jean-Gabriel Legoux
    • Bertrand Jodoin

    Peer Reviewed 11 January 2022 Pages: 525 - 544

    

16. Study of the Properties of Titanium Porous Coating with Different Porosity Gradients on 316L Stainless Steel by a Cold Spray Process

    • K. Wathanyu
    • K. Tuchinda
    • C. Bauer

    Peer Reviewed 11 January 2022 Pages: 545 - 558

    

17. Effect of Metallic Interlayer Hardness on Deposition Characteristics of Cold-Sprayed Copper Particles on Carbon Fiber-Reinforced Polymers

    • Panteha Fallah
    • Rohan Chakrabarty
    • Stephen Yue

    Peer Reviewed 11 January 2022 Pages: 559 - 573

    

18. Mechanical Behavior of Annealed Cold Sprayed Cu-Ni Coatings

    • Adrian Chua
    • Chanman Park
    • Andy Nieto

    Peer Reviewed 30 January 2022 Pages: 574 - 584

    

19. Sensitivity Analysis of Process Parameters of Warm Spraying Process Based on Response Surface Method

    • Chang Li
    • Xing Gao
    • Xing Han

    Peer Reviewed 27 January 2022 Pages: 585 - 597

    

20. Detonation Spraying of Cr₃C₂-NiCr Coatings and Their Properties

    • Vladimir Yu. Ulianitsky
    • Igor S. Batraev
    • Arina V. Ukhina

    Peer Reviewed 28 January 2022 Pages: 598 - 608

    

21. Thick Cu-hBN Coatings Using Pulsed Gas Dynamic Spray Process: Coating Formation Analysis and Characterization

    • R. Nikbakht
    • B. Jodoin

    Peer Reviewed 01 February 2022 Pages: 609 - 622

    

22. Mechanical Properties and Microstructure of 316 Stainless Steel Processed by Pulsed Micro-Plasma Additive Manufacturing

    • Xiaojing Yuan
    • Xiaohui Guo
    • Fanqi Zeng

    Peer Reviewed 11 February 2022 Pages: 623 - 635

    

23. Tantalum Coatings Deposited on Ti₆Al₄V Alloy by Self-Designed Wire Electrical Explosion Spraying

    • Hui Zhou
    • Xudong Wang
    • Liang Zhu

    Peer Reviewed 11 February 2022 Pages: 636 - 643

    

24. Microstructure and Tribological Properties of Fe-Based Composite Coatings Prepared by High-Velocity Arc Spraying

    • Jitao Liu
    • Jinran Lin
    • Fang Huang

    Peer Reviewed 11 February 2022 Pages: 644 - 657

    

25. Correction to: HVOF-Sprayed AlSi50 Alloy Coatings as a Novel Electrothermal Anti-icing/De-icing System for Polymer-based Composite Structures

    • Shouliang Yan
    • Xin Zhou
    • Xueqiang Cao

    Correction 28 December 2021 Pages: 658 - 658

26. Correction to: Life Cycle Assessment of a Thermal Sprayed Al₂O₃-NiCr Resistive Heating Coating for Pipe Freeze Protection

    • Zeynab Yousefzadeh
    • Milad Rezvani Rad
    • Shannon M. Lloyd

    Correction 15 February 2022 Pages: 659 - 659