1. Special Issue Featuring Papers From the International Thermal Spray Conference 2016

   Editorial 29 December 2016 Pages: 1 - 2

   

2. The Main Issues to Address in Modeling Plasma Spray Torch Operation

   • C. Chazelas
   • J. P. Trelles
   • A. Vardelle

   Peer Reviewed 16 December 2016 Pages: 3 - 11

   

3. Numerical Study of Suspension Plasma Spraying

   • Amirsaman Farrokhpanah
   • Thomas W. Coyle
   • Javad Mostaghimi

   Peer Reviewed 08 December 2016 Pages: 12 - 36

   

4. Suspensions Plasma Spraying of Ceramics with Hybrid Water-Stabilized Plasma Technology

   • Radek Musalek
   • Jan Medricky
   • Nicholas Curry

   Peer Reviewed 07 December 2016 Pages: 37 - 46

   

5. Effect of Oxidation on the Bonding Formation of Plasma-Sprayed Stainless Steel Splats onto Stainless Steel Substrate

   • Jun Wang
   • Chang-Jiu Li
   • Cheng-Xin Li

   Peer Reviewed 05 December 2016 Pages: 47 - 59

   

6. Particle In-Flight Velocity and Dispersion Measurements at Increasing Particle Feed Rates in Cold Spray

   • M. Meyer
   • S. Yin
   • R. Lupoi

   Peer Reviewed 08 December 2016 Pages: 60 - 70

   

7. Thermal Conductivity in Suspension Sprayed Thermal Barrier Coatings: Modeling and Experiments

   • Ashish Ganvir
   • Chamara Kumara
   • Per Nylen

   Peer Reviewed 09 December 2016 Pages: 71 - 82

   

8. Investigations on the Nature of Ceramic Deposits in Plasma Spray–Physical Vapor Deposition

   • W. He
   • G. Mauer
   • R. Vaßen

   Peer Reviewed 22 December 2016 Pages: 83 - 92

   

9. Influence of Laser Glazing on the Characterization of Plasma-Sprayed YSZ Coatings

   • Yan Wang
   • Jiangwei Liu
   • Marie-Pierre Planche

   Peer Reviewed 05 December 2016 Pages: 93 - 99

   

10. Comparison of ZrB₂-MoSi₂ Composite Coatings Fabricated by Atmospheric and Vacuum Plasma Spray Processes

    • Yaran Niu
    • Zhong Wang
    • Chuanxian Ding

    Peer Reviewed 07 December 2016 Pages: 100 - 107

    

11. Erosion Performance of Gadolinium Zirconate-Based Thermal Barrier Coatings Processed by Suspension Plasma Spray

    • Satyapal Mahade
    • Nicholas Curry
    • Robert Vaßen

    Peer Reviewed 05 December 2016 Pages: 108 - 115

    

12. Failure Behavior of Plasma-Sprayed Yttria-Stabilized Zirconia Thermal Barrier Coatings Under Three-Point Bending Test via Acoustic Emission Technique

    • L. Wang
    • J. X. Ni
    • D. Y. Li

    Peer Reviewed 13 December 2016 Pages: 116 - 131

    

13. Thermal Cycling Behavior of Quasi-Columnar YSZ Coatings Deposited by PS-PVD

    • Jiasheng Yang
    • Huayu Zhao
    • Shunyan Tao

    Peer Reviewed 05 December 2016 Pages: 132 - 139

    

14. Hot Corrosion Mechanism in Multi-Layer Suspension Plasma Sprayed Gd₂Zr₂O₇ /YSZ Thermal Barrier Coatings in the Presence of V₂O₅ + Na₂SO₄

    • Krishna Praveen Jonnalagadda
    • Satyapal Mahade
    • Ru Lin Peng

    Peer Reviewed Open access 07 December 2016 Pages: 140 - 149

    

15. Anti-icing Behavior of Thermally Sprayed Polymer Coatings

    • Heli Koivuluoto
    • Christian Stenroos
    • Petri Vuoristo

    Peer Reviewed 07 December 2016 Pages: 150 - 160

    

16. A Comparison of the Potential Capability of SFS, SPS and HVSFS for the Production of Photocatalytic Titania Coatings

    • B. Robinson
    • A. Tabecki
    • H. L. de Villiers Lovelock

    Peer Reviewed 22 December 2016 Pages: 161 - 172

    

17. Optimization of In-Situ Shot-Peening-Assisted Cold Spraying Parameters for Full Corrosion Protection of Mg Alloy by Fully Dense Al-Based Alloy Coating

    • Ying-Kang Wei
    • Xiao-Tao Luo
    • Chang-Jiu Li

    Peer Reviewed 27 December 2016 Pages: 173 - 183

    

18. Can Thermally Sprayed Aluminum (TSA) Mitigate Corrosion of Carbon Steel in Carbon Capture and Storage (CCS) Environments?

    • S. Paul
    • B. Syrek-Gerstenkorn

    Peer Reviewed 16 December 2016 Pages: 184 - 194

    

19. Flame-Sprayed Y₂O₃ Films with Metal-EDTA Complex Using Various Cooling Agents

    • Keiji Komatsu
    • Ayumu Toyama
    • Hidetoshi Saitoh

    Peer Reviewed 05 December 2016 Pages: 195 - 202

    

20. Microstructure and Thermal Properties of Atmospheric Plasma-Sprayed Yb₂Si₂O₇ Coating

    • Xin Zhong
    • Yaran Niu
    • Jinliang Sun

    Peer Reviewed 05 December 2016 Pages: 203 - 210

    

21. Effect of Sulfur Acid Corrosion on the Luminescent Intensity of Plasma-Sprayed YAG:Ce Coatings

    • Weize Wang
    • Peng Zeng
    • Liangmin Wu

    Peer Reviewed 05 December 2016 Pages: 211 - 216

    

22. Study of Traverse Speed Effects on Residual Stress State and Cavitation Erosion Behavior of Arc-Sprayed Aluminum Bronze Coatings

    • Michél Hauer
    • Knuth Michael Henkel
    • Werner Kroemmer

    Peer Reviewed 08 December 2016 Pages: 217 - 228

    

23. Investigation on the Tribological Behavior of Arc-Sprayed and Hammer-Peened Coatings Using Tungsten Carbide Cored Wires

    • W. Tillmann
    • L. Hagen
    • P. Schröder

    Peer Reviewed 07 December 2016 Pages: 229 - 242

    

24. Microstructure Effect of Intermediate Coat Layer on Corrosion Behavior of HVAF-Sprayed Bi-Layer Coatings

    • Esmaeil Sadeghimeresht
    • Nicolaie Markocsan
    • Per Nylén

    Peer Reviewed 08 December 2016 Pages: 243 - 253

    

25. Microstructure and Sliding Wear Performance of Cr₇C₃-(Ni,Cr)₃(Al,Cr) Coating Deposited from Cr₇C₃ In Situ Formed Atomized Powder

    • Hong-Bin Zhu
    • Jie Shen
    • Changhai Li

    Peer Reviewed 09 December 2016 Pages: 254 - 264

    

26. Warm Spraying of High-Strength Ni-Al-Bronze: Cavitation Characteristics and Property Prediction

    • Sebastian Krebs
    • Seiji Kuroda
    • Simon Frede

    Peer Reviewed 19 December 2016 Pages: 265 - 277