Journal of Thermal Spray Technology - ASM Top Cited Articles 2021-2022

1. Failure Analysis of a Working Roll Under the Influence of the Stress Field Due to Hot Rolling Process

2. Investigation of Anticorrosion and Mechanical Properties of Azole Functionalized Graphene Oxide Encapsulated Epoxy Coatings on Mild Steel

3. Mechanical Fractography and Worn Surface Analysis of Nanographite and ZrO2-Reinforced Al7075 Alloy Aerospace Metal Composites

4. Prognostics Analysis of Rolling Bearing Based on Bi-Directional LSTM and Attention Mechanism

5. Free Vibration Analysis of Composite Structures Using Semi-Analytical Finite Strip Method

6. Analysis of the Adhesive Damage for Different Patch Shapes in Bonded Composite Repair of Corroded Aluminum Plate Under Thermo-Mechanical Loading

7. Elaeocarpus Seed Extraction and Their Impact as a Corrosion Inhibitor for Mild Steel Submerged in HCl Wash Solution: Insight from Experimental, Mathematical, and Theoretical Views

8. Risk Analysis of Equipment Failure through Failure Mode and Effect Analysis and Fault Tree Analysis

9. The Effect of Core Shape on the Bending Response of Sandwich Panels with Filled and Unfilled Sine and Square Corrugated Cores

10. Study of Defects in the Petrochemical Storage Tank Floor using the Magnetic Flux Leakage (MFL) Technique

11. Microstructure, Mechanical Behavior and Tensile Fractography of 90-Micron-Sized Titanium Carbide Particles Reinforced Al2219 Alloy Die Cast Metal Composites

12. Experimental and Numerical Study of the Effect of Patch Shape for Notched Cracked Composite Structure Repaired by Composite Patching

13. Classification of Surface Defects on Steel Strip Images using Convolution Neural Network and Support Vector Machine

14. Developing a Comprehensive Technique for Investigating Hazmat Transport Accidents

15. Corrosion Under Insulation Examination to Prevent Failures in Equipment at a Petrochemical Plant

16. Development of Fatigue Machine to Accommodate the Application of Overloads During Fatigue Crack Propagation Tests of Polymeric Materials

17. Experimental Study on Frictional Pairs of Piston Pumps

18. Tailings Dam Failures: A Historical Analysis of the Risk

19. Failure Analysis of Boiler Water Wall Tube: A Case Study from Thermal Power Plant

20. Time-Dependent Reliability Analysis of Composite Repaired Pipes Subjected to Multiple Failure Modes

21. Impact, Tensile and Fatigue Failure Analysis of Boron Carbide Particles Reinforced Al-Mg-Si (Al6061) Alloy Composites

22. Cavitation Erosion of Ni-Based Superalloys Manufactured by Forging and Additive Manufacturing

23. MODWT and VMD Based Intelligent Gearbox Early Stage Fault Detection Approach

24. Assessment of Cooling Water and Spacing Sensitivities for Fire Propagation Prevention in Cylindrical Fuel Tank Farms

25. Fractal Dimensions of a Propagating Fatigue Crack in Metallic Materials

1. Comparison of the Weldability of AA6061-T6 Joint under Different Friction Stir Welding Conditions

2. Structural, Elastic Moduli, and Radiation Shielding of SiO2-TiO2-La2O3-Na2O Glasses Containing Y2O3

3. Defects in Metal Additive Manufacturing Processes

4. Mechanical Reliability and In Vitro Bioactivity of 3D-Printed Porous Polylactic Acid-Hydroxyapatite Scaffold

5. Development of Biomedical Implants through Additive Manufacturing: A Review

6. Characterization of Friction Stir-Welded Polylactic Acid/Aluminum Composite Primed through Fused Filament Fabrication

7. High-Performance Polyamide/Carbon Fiber Composites for Fused Filament Fabrication: Mechanical and Functional Performances

8. Effects of Post-processing on the Surface Finish, Porosity, Residual Stresses, and Fatigue Performance of Additive Manufactured Metals: A Review

9. Effect of Multiwalled Carbon Nanotubes on Improvement of Fracture Toughness of Spark-Plasma-Sintered Yttria-Stabilized Zirconia Nanocomposites

10. Friction Spot Extrusion Welding on Dissimilar Materials AA2024-T3 to AA5754-O: Effect of Shoulder Plunge Depth

11. Influence of Process Parameters on the Properties of Additively Manufactured Fiber-Reinforced Polymer Composite Materials: A Review

12. Microstructural Features and Mechanical Integrity of Wire Arc Additive Manufactured SS321/Inconel 625 Functionally Gradient Material

13. Wire Arc Additive Manufacturing: A Comprehensive Review and Research Directions

14. Microstructure and Mechanical Properties of Ti-6Al-4V Manufactured by Selective Laser Melting after Stress Relieving, Hot Isostatic Pressing Treatment, and Post-Heat Treatment

15. Insight into the Mechanical Properties and Fracture Behavior of Pt3Al Coating by Experiment and Theoretical Simulation

16. 3D-Printed Ti6Al4V Scaffolds with Graded Triply Periodic Minimal Surface Structure for Bone Tissue Engineering

17. Application of the Hot Press Method to Produce New Mg Alloys: Characterization, Mechanical Properties, and Effect of Al Addition

18. Microstructural Evolution and Mechanical Properties of Al0.5CoCrFeNi High-Entropy Alloy after Cold Rolling and Annealing Treatments

19. Integrated Fuzzy Analytic Hierarchy Process and Technique for Order of Preference by Similarity to Ideal Solution for Additive Manufacturing Printer Selection

20. 3D-Printed Objects for Multipurpose Applications

21. Effect of Friction Stir Processing on Mechanical Properties and Wear Resistance of Tungsten Inert Gas Welded Joint of Dissimilar Aluminum Alloys

22. Optimization and Fabrication of Customized Scaffold Using Additive Manufacturing to Match the Property of Human Bone

23. First-Principles Investigation of the Structural, Mechanical, and Thermodynamic Properties of Hexagonal and Cubic MoAl5 Alloy

24. Effect of Fillers and Autogenous Welding on Dissimilar Welded 316L Austenitic and 430 Ferritic Stainless Steels

25. Statistical Analysis of the Effect of the Cutting Tool Coating Type on Sustainable Machining Parameters

1. Microstructural Development in As Built and Heat Treated IN625 Component Additively Manufactured by Laser Powder Bed Fusion

2. Effect of Cooling Rate on the Phase Formation of AlCoCrFeNi High-Entropy Alloy

3. Local Ordering Tendency in Body-Centered Cubic (BCC) Multi-Principal Element Alloys

4. Thermodynamics and Chemical Ordering of Liquid Cu-Hf-Ni-Ti-Zr Alloys

5. New Insights into Phase Equilibria of the Sb-Sn System

6. Phase Equilibria in the Ti-Rich Part of the Ti-Al-Nb System-Part I: Low-Temperature Phase Equilibria Between 700 and 900 degrees C

7. Stability and Thermodynamics Properties of CrFeNiCoMn/Pd High Entropy Alloys from First Principles

8. Stability of High Entropy Alloys to Spinodal Decomposition

9. Additive Manufacturing of High-Entropy Alloys: Microstructural Metastability and Mechanical Behavior

10. Influence of 5 at.%Al-Additions on the FCC to BCC Phase Transformation in CrFeNi Concentrated Alloys

11. Investigation on the Phase Relationship and Solidification Processes of Mg-rich Mg-Mn-Y Alloys

12. Ab Initio Modeling of fcc Fe-Co-Cr-Ni High Entropy Alloys with Full Composition Range

13. Thermal Stability of Medium- and High-Entropy Alloys of 3d-Transition Metals

14. Measurement of Interdiffusion and Tracer Diffusion Coefficients in FCC Co-Cr-Fe-Ni Multi-Principal Element Alloy

15. Computational Assessment of Novel Predicted Compounds in Ni-Re Alloy System

16. Phase Relations in the ZrO2-MgO-FeOx System: Experimental Data and Assessment of Thermodynamic Parameters

17. High-Temperature Area of the Fe-Ni-Co-Cu Phase Diagram: Experimental Study and Computer Design

18. Experimental Investigation and Thermodynamic Modeling of the Phase Equilibria in the Cu-Nb-Ni Ternary System

19. Phase Equilibria in the Al-Cr-Co System in the Range of Compositions 0-70 at.% Al

20. Insight into Phase Stability in the Mg-Pt System. The Ab Initio Calculations

21. Phase Equilibria in the Fe-Al-Nb(-B) System at 700 degrees C

22. A Third Generation Calphad Description of Fe: Revisions of Fcc, Hcp and Liquid

23. Phase Equilibria in the Ti-Zr-Sn System

24. Zentropy Theory for Positive and Negative Thermal Expansion

25. What is the Enthalpy Contribution to the Stabilization of the Co–Cr–Fe–Mn–Ni Faced-centered Cubic Solid Solution?

1. Microstructure and Tribological Properties of Plasma-Sprayed CoCrFeNi-based High-Entropy Alloy Coatings Under Dry and Oil-Lubricated Sliding Conditions

2. Perspectives on Environmental Barrier Coatings (EBCs) Manufactured via Air Plasma Spray (APS) on Ceramic Matrix Composites (CMCs): A Tutorial Paper

3. Sliding Wear of Conventional and Suspension Sprayed Nanocomposite WC-Co Coatings: An Invited Review

4. Microstructure and Properties of Al2O3-13wt.%TiO2-Reinforced CoCrFeMnNi High-Entropy Alloy Composite Coatings Prepared by Plasma Spraying

5. Microstructural and Tribological Behavior of Thermal Spray CrMnFeCoNi High Entropy Alloy Coatings

6. Effect of Coating Thickness on the Slurry Erosion Resistance of HVOF-Sprayed WC-10Co-4Cr Coatings

7. Thermal Spray Copper Alloy Coatings as Potent Biocidal and Virucidal Surfaces

8. Size Effects of Brittle Particles in Aerosol Deposition-Molecular Dynamics Simulation

9. A Self-Consistent Scheme for Understanding Particle Impact and Adhesion in the Aerosol Deposition Process

10. Development of Highly Durable Superhydrophobic Coatings by One-Step Plasma Spray Methodology

11. Prediction of Particle Properties in Plasma Spraying Based on Machine Learning

12. Ablative Property and Mechanism of ZrC-TaC/ZrC-SiC Coatings on C/C Composites under Different Heat Fluxes

13. Thermal Effects in Sn Coating on a Carbon Fiber Reinforced Plastic by Cold Spraying

14. A Numerical Approach to Study the Oxide Layer Effect on Adhesion in Cold Spray

15. Numerical Modeling of Bond Formation in Polymer Surface Metallization Using Cold Spray

16. Plasma-Sprayed Graphene Nanosheets/ZnO/Al2O3 Coatings with Highly Efficient Microwave Absorption Properties

17. Comparison of Micro-nano FeCoNiCrAl and FeCoNiCrMn Coatings Prepared from Mechanical Alloyed High-entropy Alloy Powders

18. Effects of Particle Size on the Microstructure and Mechanical Properties of HVAF-Sprayed Al-Based Quasicrystalline Coatings

19. Benefits of Hydrogen in a Segmented-Anode Plasma Torch in Suspension Plasma Spraying

20. Sliding Wear Behavior of the Nanoceria-Doped AlCrFeCoNi High-Entropy Alloy Coatings Deposited by Air Plasma Spraying Technique

21. Microstructural, Mechanical and Wear Behavior of HVOF and Cold-Sprayed High-Entropy Alloys (HEAs) Coatings

22. Evaluation of New High Entropy Alloy as Thermal Sprayed Bondcoat in Thermal Barrier Coatings

23. Predicted Anode Arc Attachment by LTE (Local Thermodynamic Equilibrium) and 2-T (Two-Temperature) Arc Models in a Cascaded-Anode DC Plasma Spray Torch

24. Establishing a Cold Spray Particle Deposition Window on Polymer Substrate

25. Influence of Plasma Transferred Arc Remelting on Microstructure and Properties of PTAW-Deposited Ni-Based Overlay Coating

1. Experimental Study on Micro-Friction Stir Welding of Dissimilar Butt Joints Between Al 1050 and Pure Copper

2. Development of an Empirical Model on Melt Pool Variation in Laser Foil Printing Additive Manufacturing Process Using Statistical Analysis

3. Microstructural Development in Inconel 718 Nickel-Based Superalloy Additively Manufactured by Laser Powder Bed Fusion

4. Effect of Strain Rate on Mechanical Behavior and Microstructure Evolution of Ti-Based T110 Alloy

5. Mechanical Properties And Microstructure Evolution in Arc Stud Welding Joints of AISI 1020 with AISI 316L and AISI 304

6. Microstructural and Electrochemical Characterization of Zinc Coating onto Low Carbon Steel Substrate

7. Creep Behaviors Evaluation of IN738 Superalloy Welded by Pulsed Nd:YAG Laser Through the Small Punch Creep Test

8. Interlayers in Resistance Spot-Welded Lap Joints: A Critical Review

9. Static and Fatigue Characteristics of Heat-Treated Ti-6Al-3Mo-2Zr-2 Sn-2Nb-1.5Cr-0.1Si Alloy

10. X-ray Diffraction Analysis of a Class of AlMgCu Alloy Using Williamson-Hall and Scherrer Methods

11. High-Temperature Oxidation Studies of Plasma-Sprayed NiCrAlY/TiO2 and NiCrAlY/Cr2O3/YSZ Cermet Composite Coatings on MDN-420 Special Steel Alloy

12. Fretting Wear and Scratch Resistance of Cold-Sprayed Pure Cu and Ti

13. Investigation on Microstructural and Mechanical Properties of Microwave Welded Al6061-SiC-Graphite Hybrid Metal Matrix Composites

14. Revealing the Hierarchical Microstructure of Innovative Additively Manufactured Metal Parts with Conventional Light Microscopy

15. Flow Curve and Microstructure Analysis of a ZK60 Magnesium Alloy during Hot Compression Tests

16. High Strain Behaviour of Ultrafine-grained Aluminium Alloys Processed Through the Severe Plastic Deformation Techniques: A Review

17. Influence of Microalloying Additions (Nb, Ti, Ti/B, V and Mo) on the Microstructure of TWIP Steels

18. Influence of Grain Refiner, Modifier and Graphene on the Dry Sliding Wear of Hypereutectic Al-Si Alloys

19. Effect of Initial alpha-Phase Morphology on Microstructure, Mechanical Properties, and Work-Hardening Instability During Heat Treatment of TC21 Ti-Alloy

20. A Study on the Phase Formation and Physical Characteristics of Hot-Dip Aluminized Coating at 750 degrees C

21. Microstructure Analysis of High-Density 316L Stainless Steel Manufactured by Selective Laser Melting Process

22. Behavior of Carbon Steel Machine Elements in Acidic Environment Surface Texture Using Abbott Firestone Curve

23. Synthesis and Characterization of Al-SiC Composite Coatings on 316L Stainless Steel Fabricated via Laser Cladding Technique

24. Effects of Grain Refiners and Cooling Rates on the Microstructure and Tensile Properties of A357Alloy

25. Corrosion of a Spark Plasma Sintered Fe-Cr-Mo-B-C Alloy in Hydrochloric Acid

1. Processing and Scalability of NiTiHf High-Temperature Shape Memory Alloys

2. Martensite Transformation and Superelasticity at High Temperature of (TiHfZr)(74)(NbTa)(26) High-Entropy Shape Memory Alloy

3. Unraveling Frequency Effects in Shape Memory Alloys: NiTi and FeMnAlNi

4. Structure and Superelasticity of Novel Zr-Rich Ti-Zr-Nb Shape Memory Alloys

5. Lattice Defects Generated by Cyclic Thermomechanical Loading of Superelastic NiTi Wire

6. On the Influence of Thermal History on the Martensitic Transformation in Ti-24Nb-4Zr-8Sn (wt%)

7. Applying Full-Field Measurement Techniques for the Thermomechanical Characterization of Shape Memory Alloys: A Review and Classification

8. Effect of Crystallographic Orientation and Grain Boundaries on Martensitic Transformation and Superelastic Response of Oligocrystalline Fe-Mn-Al-Ni Shape Memory Alloys

9. Fatigue Crack Growth in Austenitic and Martensitic NiTi: Modeling and Experiments

10. A Top-Down Characterization of NiTi Single-Crystal Inelastic Properties within Confidence Bounds through Bayesian Inference

11. Structure and Properties of Ti-50.2Ni Alloy Processed by Laser Powder Bed Fusion and Subjected to a Combination of Thermal Cycling and Heat Treatments

12. Shape Memory Alloy-Enabled Expandable Space Habitat-Case Studies for Second CASMART Student Design Challenge

13. Multi-objective Optimization of Cutting Parameters for Machining Process of Ni-Rich NiTiHf High-Temperature Shape Memory Alloy Using Genetic Algorithm

14. Effect of Specimen Thickness on the Fracture Toughness of a NiTi Shape Memory Alloy

15. Pre-strain and Mean Strain Effects on the Fatigue Behavior of Superelastic Nitinol Medical Devices

16. Coherent Precipitates as a Condition for Ultra-Low Fatigue in Cu-Rich Ti53.7Ni24.7CU21.6 Shape Memory Alloys

17. Effect of Ni/Ti Ratio and Ta Content on NiTiTa Alloys

18. Production and Mechanical Properties of Cu-Al-Ni-Be Shape Memory Alloy Thin Ribbons Using a Cold Co-Rolled Process

19. Effect of Nickel Content on Processing of Ni-Rich NiTiHf High-Temperature Shape Memory Alloys

20. Quantification of Shape Memory Alloy Damping Capabilities Through the Prediction of Inherent Behavioral Aspects

21. Valence Electron Ratio for Design of Shape Memory Alloys with Desired Phase Transformation Temperatures

22. The Build Orientation Dependency of NiTi Shape Memory Alloy Processed by Laser Powder Bed Fusion

23. A Shape Memory Alloy Constitutive Model with Polynomial Phase Transformation Kinetics

24. Role of Structural Heredity in Aging-Induced Microstructure and Transformation Behavior in Ni-rich Titanium Nickelide

25. Nitinol Release of Nickel under Physiological Conditions: Effects of Surface Oxide, pH, Hydrogen Peroxide, and Sodium Hypochlorite