1. Energy Absorption Characteristics of Fused Deposition Modeling 3D Printed Auxetic Re-entrant Structures: A Review

   • Niranjan Kumar Choudhry
   • Biranchi Panda
   • Uday Shanker Dixit

   Review 03 May 2023 Pages: 8981 - 8999

   

2. Effect of Triple Tempering Temperature on Microstructure, Mechanical, and Wear Properties of K340 Cold Work Tool Steel

   • Saeed Farahany
   • Mehdi Ziaie
   • Nur Azmah Nordin

   Technical Article 27 December 2022 Pages: 9000 - 9010

   

3. Wear and Corrosion of UNS S32750 Steel Subjected to Nitriding and Cathodic Cage Deposition

   • Lauriene G. L. Silva
   • M. Naeem
   • Rômulo R. M. Sousa

   Technical Article 04 January 2023 Pages: 9011 - 9018

   

4. Microstructure, Corrosion Resistance, and Hardness of Simulated Heat-Affected Zone of Duplex UNS S32205 and Superduplex UNS S32750 Stainless Steels

   • P. H. R. Pecly
   • B. B. Almeida
   • S. S. M. Tavares

   Technical Article 05 January 2023 Pages: 9019 - 9028

   

5. Electroless Nickel-Plated Ferrochromium Flue Dust as Anode Material for Lithium-Ion Batteries

   • Humza Ashraf
   • Billur Deniz Karahan

   Original Research Article 03 February 2023 Pages: 9029 - 9039

   

6. Microstructure Characteristic and Impact Wear Behavior of Nb-Alloyed High Manganese Steels

   • Yongqiang Guo
   • Yongjin Wang
   • Jingtao Han

   Technical Article 28 December 2022 Pages: 9040 - 9050

   

7. Study on Stress and Plastic Deformation of Scaled Cylinder Head Specimens under Thermal Shock

   • Guangyi Xie
   • Jilin Lei
   • Huabing Zhang

   Technical Article 06 March 2023 Pages: 9051 - 9063

   

8. Deformation Behavior, Recrystallization Kinetics, Strengthening Mechanisms and Residual Stress in Al-Mg-Si-Ag Alloy Processed by Equal-Channel Angular Pressing

   • Oussama Djema
   • Thomas Niendorf
   • Amane Sahli

   Technical Article 13 January 2023 Pages: 9064 - 9078

   

9. Effect of Aging and Rolling on Microstructure and Mechanical Properties of AA7075/TaC Composites

   • John Samson Khalkho
   • D. Benny Karunakar
   • Suresh Vidyasagar

   Technical Article 06 January 2023 Pages: 9079 - 9100

   

10. Sliding Wear Resistance of Borided AISI 4140 Steel

    • R. Márquez-Cortés
    • J. Martínez-Trinidad
    • R. A. García-León

    Technical Article 27 December 2022 Pages: 9101 - 9113

    

11. Optimizing 304 Stainless Steel Surface Performance with CoCrFeMoNi High-Entropy Alloy Coating via Gas Tungsten Arc Cladding

    • Ning Liu
    • Zhou Lan
    • Xiaoli Wang

    Technical Article 19 January 2023 Pages: 9114 - 9120

    

12. Microstructure Evolution and Mechanical Properties of a TiAl Alloy Modified by High-Entropy Alloy Additions

    • Qiang Hu
    • Qiang Wang
    • Xinwang Liu

    Technical Article 27 December 2022 Pages: 9121 - 9136

    

13. Wear and Corrosion Behavior of Zn-Ni-Cu and Zn-Ni-Cu-TiB₂-Coated Mild Steel

    • Sheikh Idrees Ali
    • Sheikh Nazir Ahmad

    Technical Article 02 February 2023 Pages: 9137 - 9152

    

14. Corrosion of 1.4016 Ferritic Steel by Urea at High Temperature

    • Anastasiia Galakhova
    • Fabian Kadisch
    • Simon Burger

    Technical Article Open access 09 March 2023 Pages: 9153 - 9162

    

15. Electrochemical Investigations on the Corrosion Behavior of 904L Stainless Steel in LiBr Solutions

    • Sherief A. Al Kiey
    • E. A. Abd El Meguid
    • S. S. Abd El Rehim

    Technical Article Open access 03 April 2023 Pages: 9163 - 9173

    

16. Multifunctional Ti₃AlC₂-Based Composites via Fused Filament Fabrication and 3D Printing Technology

    • Dongyan Liu
    • Lukas Hentschel
    • Guoxin Sui

    Technical Article Open access 25 April 2023 Pages: 9174 - 9181

    

17. Corrosion Performance of Bioglass-Coated AZ31 Alloy under Static and Accelerated Flow Conditions

    • Y. Uzun

    Original Research Article 24 August 2023 Pages: 9182 - 9197

    

18. Investigations of the Wettability and Electrochemical Corrosion Behavior of Nb₂O₅ Thin Films on a Ti45Nb Alloy

    • Mevra Aslan Çakır

    Original Research Article 28 August 2023 Pages: 9198 - 9205

    

19. Uncertainties in the Swift Hardening Law Parameters and Their Influence on the Flow Stress and the Hole Expansion Behavior of Dual-Phase (DP600) Steel Specimens

    • Kali Prasad
    • Deepak Kumar
    • Dilip K. Banerjee

    Technical Article 04 January 2023 Pages: 9206 - 9220

    

20. An Improved Anisotropic Non-associated Plastic Potential Based on Barlat’s Yld 2000-2D Yield Stress Criterion

    • José Divo Bressan
    • Mauricio Vicente Donadon

    Technical Article 06 March 2023 Pages: 9221 - 9243

    

21. A New Approach to the Optimization of the Austenite Stability of Metastable Austenitic Stainless Steels

    • Aaron Berger
    • Gero Egels
    • Sebastian Weber

    Technical Article Open access 23 March 2023 Pages: 9244 - 9252

    

22. An Analysis Framework of Additively Manufactured Deterministic Porous Structures for Transpiration Cooling

    • Kevin Zhang
    • Jean-Pierre Hickey
    • Mihaela Vlasea

    Original Research Article 21 July 2023 Pages: 9253 - 9262

    

23. Investigation of Microstructure and Several Quality Characteristics of AA7075/Al₂O₃/Coconut Shell Ash Hybrid Nano Composite Prepared through Ultrasonic Assisted Stir-Casting

    • Ashish Kumar
    • R. C. Singh
    • Rajiv Chaudhary

    Technical Article 27 December 2022 Pages: 9263 - 9278

    

24. Influence of Zr Content on Microstructure and Corrosion Behavior of As-Cast Zr-Modified Ti6Al7Nb Alloy for Biomedical Applications

    • Bo Li
    • Pengfei Ji
    • Riping Liu

    Technical Article 15 March 2023 Pages: 9279 - 9294

    

25. Integrity Assessment of 10Cr Ferritic Steel/Alloy 617M Dissimilar Metal Weld Joint under Creep Condition

    • T. Sakthivel
    • H. C. Dey
    • Shaju K. Albert

    Technical Article 19 January 2023 Pages: 9295 - 9308

    

26. Relationship between Grain Size and Sample Thickness on the Creep-Rupture Performance of Thin Metallic Sheets of INCONEL Alloy 740H

    • John Shingledecker
    • Eeva Griscom
    • Alex Bridges

    Technical Article Open access 12 January 2023 Pages: 9309 - 9322

    

27. Rate and Load Effects on Scratch Behavior of Thermoplastics by Berkovich Indenter

    • Ming Liu
    • Peng Xie

    Technical Article 05 January 2023 Pages: 9323 - 9343

    

28. Influence of Extrusion Temperature on the Microstructure and Mechanical Properties of a 0.5 wt.% Graphene Nanoplatelet-Reinforced Aluminum Composite

    • Shumei Lou
    • Baojia Cheng
    • Li Li

    Technical Article 27 December 2022 Pages: 9344 - 9356

    

29. The Tensile Anisotropy of TC17 Disk Fabricated by Through-Transus Processing

    • Wei Chen
    • Weidong Zeng
    • Jianwei Xu

    Technical Article 27 January 2023 Pages: 9357 - 9369

    

30. Effect of Pre-treatment and Duration of Pulse Plasma Nitriding on Duplex Plasma Treatment by Physical Vapor Deposition of TiN on AISI D2 Steel

    • Kalyan Das
    • Alphonsa Joseph
    • Manojit Ghosh

    Technical Article 06 January 2023 Pages: 9370 - 9382

    

31. Improvement of Mechanical Properties of G115 Steel Welded Joint by Adjusting Welding Current

    • Yankun Wang
    • Qingshuang Ma
    • Huijun Li

    Technical Article 13 January 2023 Pages: 9383 - 9395

    

32. On the Three-Dimensional Morphology of In Situ Grown TiB₂ Particles in Molten Aluminum

    • Chandan Singh
    • Jolanta Prywer
    • Devinder Yadav

    Technical Article 11 January 2023 Pages: 9396 - 9404

    

33. Processing of Triangular Profile on Inconel-825 Superalloy by Wire Electrical Discharge Machining and Corner Error Optimization Using Teaching Learning-Based Optimization Technique

    • Himanshu Bisaria
    • Arun Kumar Rouniyar

    Technical Article 17 January 2023 Pages: 9405 - 9417

    

34. Study of the Effect of Ultrasonic Vibration on Nickel-Based Coating by Electrical Discharge Machining

    • Wentao Hou
    • Weiwei Xu
    • Zhongyu Piao

    Technical Article 03 January 2023 Pages: 9418 - 9427

    

35. Microstructure Evolution and Interfacial Bonding Properties of Dissimilar T-Lap Joints Using Friction Stir Welding Parameters

    • Hao Dinh Duong
    • Tra Hung Tran
    • Nam Hoai Quach

    Technical Article 03 January 2023 Pages: 9428 - 9439

    

36. Effect of Processing Parameters on the Phase Transformation of a High Temperature Copper-Based Shape Memory Alloy

    • S. Vegar Seyedmohammadi
    • Guney Guven Yapici

    Technical Article 19 January 2023 Pages: 9440 - 9447

    

37. Comprehensive Analysis of the Effect of Ultrasonic Surface Rolling Process on the Friction and Wear Properties of TB8 Titanium Alloy

    • Yu Liu
    • Hao Cui
    • Xiaohui Zhao

    Technical Article 11 January 2023 Pages: 9448 - 9459

    

38. Interface Bonding Mechanism of 2024/6061 Aluminum Alloy Bimetallic Casting Blank Subjected to Isothermal Compression

    • Yangbo Wang
    • Fangcheng Qin
    • Hengxing Wang

    Technical Article 03 January 2023 Pages: 9460 - 9471

    

39. A New Approach to Empirical Optimization of Laser Powder Bed Fusion Process for Ti6Al4V Parts

    • Alireza Dareh Baghi
    • Shahrooz Nafisi
    • Reza Ghomashchi

    Technical Article Open access 20 March 2023 Pages: 9472 - 9488