1. In Vitro Degradation Behavior of Ti-Microalloyed AZ31 Magnesium Alloy in Simulated Body Fluid

   • S. Candan
   • S. Emir
   • E. Candan

   OriginalPaper 26 August 2021 Pages: 1 - 10

   

2. Effect of Manganese on Synergistic Erosion–Corrosion Characteristics of A890 7A Hyper Duplex Stainless Steels

   • P Nithin Raj
   • B Raha
   • MA Joseph

   OriginalPaper 23 August 2021 Pages: 11 - 23

   

3. Microstructure and Mechanical Properties of WC-Co/WC-Co Oxyacetylene Brazed Joints Using Ag-Based Filler Alloy

   • N. P. Mphasha
   • D. J. Whitefield

   OriginalPaper 26 August 2021 Pages: 24 - 36

   

4. Research on the Mechanical Properties and Hot Deformation Behaviors of Spray-Deposited 7034 Al Alloy Processed by Forward Extrusion

   • Duanyang Tian
   • Rui Wang
   • Jia Zheng

   OriginalPaper 01 September 2021 Pages: 37 - 52

   

5. Analysis of Multi-zone Fatigue Crack Growth Behavior of Friction Stir Welded 5083 Aluminum Alloy

   • Binghan Huang
   • Lei Wang
   • Song Zhou

   OriginalPaper 31 August 2021 Pages: 53 - 63

   

6. Corrosion Behavior of Ni-Based Metallic Coatings Deposited by Thermal Spray Method on Low Nickel Austenitic Stainless Steel

   • Ankush S. Marodkar
   • Ravindra V. Taiwade
   • Himanshu Vashishtha

   OriginalPaper 07 September 2021 Pages: 64 - 74

   

7. Damping Property of AA6061/SiCp Surface Composites Developed through Friction Stir Processing

   • Koppula Venkateswara Reddy
   • Ramavath Bheekya Naik
   • Raju Arockia Kumar

   OriginalPaper 08 September 2021 Pages: 75 - 81

   

8. Tribological Properties and Frictional Noise Behavior of Inconel 625 with Micro-texture Filled by Sn-Ag-Cu

   • Jin Zhang
   • Chaohua Wu
   • Kaipeng Zhang

   OriginalPaper 25 August 2021 Pages: 82 - 93

   

9. Quasi Static and Fatigue Properties of Long Carbon Fiber Reinforced Polyamide

   • Jan-Marc Tiemann
   • Javad Mola
   • Ulrich Krupp

   OriginalPaper Open access 03 September 2021 Pages: 94 - 104

   

10. Effect of Forging on Microstructure and Properties of Al-9Si-5Cu-0.2Zr-0.1Sr-0.16Ti-0.1Ce Cast Aluminum Alloy

    • Chen Li
    • Xiaojing Xu
    • Yuan Zhuang

    OriginalPaper 09 September 2021 Pages: 105 - 112

    

11. Mechanical Properties Study of a Duplex Stainless Steel Weld Using Physical Simulation and Work Hardening Models

    • Gabriela Aksascki Caetano
    • Tiago Bristt Gonoring
    • Marcos Tadeu D’Azeredo Orlando

    OriginalPaper 30 August 2021 Pages: 113 - 127

    

12. The Effect of Temperature on Wear Performance of High-Velocity Oxy-Fuel Sprayed WC-10Co-4Cr Coating on AA7075-T6 Substrate

    • Mehmet Ceviz
    • Cenk Misirli
    • Sencer Sureyya Karabeyoglu

    OriginalPaper 30 August 2021 Pages: 128 - 138

    

13. Synergetic Lubricating Performance of M50-SnAgCu-Nb₂C Bionic Composites Fabricated by Laser Additive Manufacturing under Oil Lubrication

    • Qipeng Huang
    • Xiaoliang Shi
    • Chaohua Wu

    OriginalPaper 31 August 2021 Pages: 139 - 151

    

14. Grain Refinement Mechanism and Improvement of Mechanical Properties of Mg-Gd-Y-Zr Alloy at Elevated Temperature through Ag Addition

    • Jian Bao
    • Quanan Li
    • Ziyi Chen

    OriginalPaper 13 September 2021 Pages: 152 - 161

    

15. Effect of Welding Consumables on the Ballistic Performance of Shielded Metal Arc Welded Dissimilar Armor Steel Joints

    • S. Naveen Kumar
    • V. Balasubramanian
    • V. Balaguru

    OriginalPaper 13 September 2021 Pages: 162 - 179

    

16. Painting Process Design and Characterization of Polymer Coatings on Brass

    • S. Zouari
    • H. Ghorbel
    • R. Elleuch

    OriginalPaper 13 September 2021 Pages: 180 - 190

    

17. Additive Manufacturing of Polyamide 66: Effect of Process Parameters on Crystallinity and Mechanical Properties

    • Guangxin Liao
    • Zhixiang Li
    • Jianzhong Fu

    OriginalPaper 27 August 2021 Pages: 191 - 200

    

18. Relationship of the Microstructure and Toughness of the Coarse Grain Heat-Affected Zone of TiNbV Microalloyed Steels Based on Electron Backscatter Diffraction Analysis

    • Han Yan
    • Di Zhao
    • Kuijun Fu

    OriginalPaper Open access 07 October 2021 Pages: 201 - 210

    

19. Laser Cladding of Inconel 625 on AISI 316L: Microstructural and Mechanical Evaluation of Parameters Estimated by Empirical-Statistical Model

    • Paulo Rafael A. Bloemer
    • Jeferson T. Pacheco
    • Moisés F. Teixeira

    OriginalPaper 20 August 2021 Pages: 211 - 220

    

20. Hot Deformation Characteristics and Microstructure Evolution of SiCp/Al2014 Composite Fabricated by Powder Metallurgy

    • Cuige Dong
    • Richu Wang
    • Langya Zhou

    OriginalPaper 07 September 2021 Pages: 221 - 229

    

21. Effect of Auxiliary Enhanced Magnetic Field on Microstructure and Mechanical Behaviors of Multilayered CrN/AlCrN Films

    • Peng Luo
    • Chunzhi Gong
    • Xiubo Tian

    OriginalPaper 27 August 2021 Pages: 230 - 239

    

22. Three-Dimensional Printing of Innovative Intramedullary Pin Profiles with Direct Metal Laser Sintering

    • Rupinder Singh
    • Jashanpreet Singh Sidhu
    • Ashwani Kumar

    OriginalPaper 01 September 2021 Pages: 240 - 253

    

23. Effect of Multiple Repair Welding on Crack Susceptibility and Mechanical Properties of Inconel 718 Alloy Casting

    • Maodong Kang
    • Ming Jiang
    • Jun Wang

    OriginalPaper 30 August 2021 Pages: 254 - 261

    

24. The Effect of Vacuum on the Mechanical Properties of Sand Cast AA6061 Alloy

    • Subodh Daronde
    • Abhaykumar Kuthe
    • Sandeep Dahake

    OriginalPaper 24 August 2021 Pages: 262 - 271

    

25. Direct Formed High-Strength Bolt with Hot-Rolled Twinning-Induced Plasticity Steel Using Its High Strain Hardening Rate

    • Joong-Ki Hwang

    OriginalPaper 03 September 2021 Pages: 272 - 285

    

26. Experimental and Numerical Investigation on Bending Behavior of Ti-6Al-4V Parts Produced by Additive Metal Laser Sintering

    • Kamuran Kamil Yesilkaya
    • Yusuf Usta
    • Teyfik Demir

    OriginalPaper 15 September 2021 Pages: 286 - 296

    

27. Microstructure and Properties of a Medium-Carbon Ti-Mo-Bearing Steel Treated by One-Step Quenching and Partitioning Treatment

    • Man Liu
    • Jisheng Guan
    • Guang Xu

    OriginalPaper 07 September 2021 Pages: 297 - 304

    

28. Effect of Processing Routes on the Microstructure and Thermoelectric Properties of Half-Heusler TiFe_0.5Ni_0.5Sb_1−xSn_x (x = 0, 0.05, 0.1, 0.2) Alloys

    • Anirudha Karati
    • Sanyukta Ghosh
    • U. V. Varadaraju

    OriginalPaper 23 September 2021 Pages: 305 - 317

    

29. Effect of Charging Process on Properties of Steel Plates Formed via Hot-Core Heavy Reduction Rolling

    • Haijun Li
    • Tianxiang Li
    • Guodong Wang

    OriginalPaper 03 September 2021 Pages: 318 - 327

    

30. Optimization of Process Parameters of Boron Carbide-Reinforced Al-Zn-Mg-Cu Matrix Composite Produced by Pressure-Assisted Sintering

    • Ankit Sharma
    • Barath Tirumuruhan
    • Ravindran Sujith

    OriginalPaper 07 September 2021 Pages: 328 - 340

    

31. Isothermal Heat Treatment of Wheel Steel with High Cr and Si Contents Based on Microstructure, Mechanical Properties, and Wear Performance

    • Xiaojiao Shi
    • Xiaoxin Zhang
    • Qingzhi Yan

    OriginalPaper 09 September 2021 Pages: 341 - 352

    

32. Effect of Heat Treatment on the Microstructure and Properties of Inconel 718 Alloy Fabricated by Selective Laser Melting

    • Rongxia Zhao
    • Zhanyong Zhao
    • Hongqiao Qu

    OriginalPaper 07 September 2021 Pages: 353 - 364

    

33. Characterization and Kinetics of Chromium Carbide Coatings on AISI O2 Tool Steel Performed by Pack Cementation

    • M. A. Elhelaly
    • M. A. El-Zomor
    • A. O. Youssef

    OriginalPaper 07 September 2021 Pages: 365 - 375

    

34. Study on Microstructure Characterization and Impact Toughness in the Reheated Coarse-Grained Heat Affected Zone of V-N Microalloyed Steel

    • Hongyan Wu
    • Dengliang Xia
    • Linxiu Du

    OriginalPaper 07 September 2021 Pages: 376 - 382

    

35. Understanding Solidification Behavior of Salt Phase Change Material with Added Carbon Nanoparticles Using Computer-Aided Cooling Curve Analysis

    • Sudheer R
    • Prabhu K.N

    OriginalPaper 24 August 2021 Pages: 383 - 389

    

36. Impact of Subsequent Pass Weld Thermal Cycles on First-Pass Coarse Grain Heat-Affected Zone’s Microstructure and Mechanical Properties of Naval Bainitic Steel

    • Sanjeev Kumar
    • Ashutosh Sharma
    • S. K. Nath

    OriginalPaper 13 September 2021 Pages: 390 - 399

    

37. Study on Recyclability of 316L Stainless Steel Powder by Using Laser Directed Energy Deposition

    • Shihua Li
    • Bo Chen
    • Xiaoguo Song

    OriginalPaper 23 August 2021 Pages: 400 - 409

    

38. Al Alloy Tailor Welded Blank Fabrication by Friction Stir Welding: Effect of Double-Pass

    • Tanveer Majeed
    • Yashwant Mehta
    • Arshad Noor Siddiquee

    OriginalPaper 30 August 2021 Pages: 410 - 423

    

39. Microstructure and Mechanical Properties of Al/Cu_p/SiC_p/TiC_p-Based Hybrid Composites Fabricated by Spark Plasma Sintering

    • Samata Saha
    • Manojit Ghosh
    • Joydeep Maity

    OriginalPaper 26 August 2021 Pages: 424 - 438

    

40. Cavitation Resistance of a Cr-Mn Stainless Steel, A Mild Steel, and A High-Carbon Steel Based on Rust Protectivity and Corrosion Behavior

    • Arun Rajput
    • J. Ramkumar
    • K. Mondal

    OriginalPaper 30 August 2021 Pages: 439 - 447

    

41. Microstructures and High-Temperature Friction and Wear Behavior of High-Velocity Oxygen-Fuel-Sprayed WC-12%Co-6%Cr Coatings before and after Sealing

    • Yu-wan Liu
    • Wan-chang Sun
    • Yan Xiao

    OriginalPaper 03 September 2021 Pages: 448 - 460

    

42. Structural and Electrical Properties of Spin-Coated LaF₃ Thin Film on Porous Silicon

    • Md. Hafijur Rahman
    • Shamim Ahmmed
    • Abu Bakar Md. Ismail

    OriginalPaper 07 September 2021 Pages: 461 - 470

    

43. Hardness and Oxidation Resistance of In Situ Synthesized Multi-phase (TiB + TiC + Ti₅Si₃) Hybrid-Reinforced Ti555-Type Titanium Matrix Composites

    • Hao Wang
    • Xiaojing Xu
    • Shaohui Sha

    OriginalPaper 07 September 2021 Pages: 471 - 482

    

44. Microstructure and Grain Boundary Corrosion Mechanism of Pearlitic Material

    • Zhaoliang Li
    • Wei Xue
    • Kui Xiao

    OriginalPaper 09 September 2021 Pages: 483 - 494

    

45. The Effects of Potassium Iodate as an Environment-Friendly Stabilizer on Preparation and Properties of Electroless Ni-B Plating

    • Wenchang Wang
    • Sen Yang
    • Zhidong Chen

    OriginalPaper 07 September 2021 Pages: 495 - 502

    

46. Effects of Cold Rolling on the Corrosion Behavior of Cu-30Fe Alloy

    • Daibo Zhu
    • Xiaojin Liu
    • Tan Han

    OriginalPaper 23 August 2021 Pages: 503 - 513

    

47. Influence of Vanadium-Chromium Carbide on the Microstructure of Reinforced FeCrV15 Hardfacing during Laser Cladding Deposit

    • Basiru Aramide
    • Sisa Pityana
    • Rotimi Sadiku

    OriginalPaper 23 August 2021 Pages: 514 - 523

    

48. Effect of TiC on Microstructure and Strength of Al-Bi-Cu Alloys

    • Congmin Li
    • Yanguo Yin
    • Bingxun Yang

    OriginalPaper 08 September 2021 Pages: 524 - 533

    

49. Preparation and Characterization of the Anti-high Temperature Oxidation Borosilicate Glass Coating on TC4 Titanium Alloy

    • Lianghong Xiao
    • Shunqi Huang
    • Chengliang Long

    OriginalPaper 03 September 2021 Pages: 534 - 541

    

50. A Comparative Study of Microstructures and Mechanical Behavior of Laser Metal Deposited and Electron Beam Melted Ti-6Al-4V

    • Mehmood Rashid
    • R. Lakshmi Narayan
    • Wei-Zhong Han

    OriginalPaper 03 September 2021 Pages: 542 - 551