1. EUROMAT 2019 Symposia on Processing

   • Ivan Kaban
   • Anna Zervaki
   • Simeon Agathopoulos

   Guest Editorial Open access 18 August 2020 Pages: 4831 - 4832

2. Effect of Ni on Surface Energy and Diffusion Creep of Solid Ag

   • S. N. Zhevnenko
   • I. O. Dmitrieva
   • V. E. Antonova

   OriginalPaper 02 January 2020 Pages: 4833 - 4839

   

3. Welding between Aluminum Alloy and Steel Sheets by Using Transition Joints

   • P. Matteis
   • A. Gullino
   • G. Scavino

   OriginalPaper 03 February 2020 Pages: 4840 - 4853

   

4. Non-stoichiometry, Electrowetting and Contact Interaction of Zirconia, Titania or Hafnia with Metal Melts

   • Olexiy Durov
   • Tetiana Sydorenko

   OriginalPaper 12 February 2020 Pages: 4854 - 4863

   

5. Studies of the Joining-Relevant Interfacial Properties in the Si-Ti/C and Si-Ti/SiC Systems

   • Donatella Giuranno
   • Natalia Sobczak
   • Rada Novakovic

   OriginalPaper Open access 13 February 2020 Pages: 4864 - 4871

   

6. Microstructure, Thermal Stability during Creep and Fractography Study of Friction-Stir-Processed AA2024-T3 Aluminum Alloy

   • Michael Regev
   • Stefano Spigarelli

   OriginalPaper 27 February 2020 Pages: 4872 - 4878

   

7. Calibration of High-Frequency Mechanical Impact Simulation Based on Drop Tests

   • Stefanos Gkatzogiannis
   • Peter Knoedel
   • Thomas Ummenhofer

   OriginalPaper Open access 04 May 2020 Pages: 4879 - 4887

   

8. Modeling the Failure Behavior of Self-Piercing Riveting Joints of 6xxx Aluminum Alloy

   • Florian Hönsch
   • Josef Domitner
   • Bruno Götzinger

   OriginalPaper Open access 23 June 2020 Pages: 4888 - 4897

   

9. Active Brazing of SiC-Base Ceramics to High-Temperature Alloys

   • M. Singh
   • R. Asthana
   • N. Sobczak

   OriginalPaper 07 July 2020 Pages: 4898 - 4912

   

10. A New Design for Friction Stir Spot Joining of Al Alloys and Carbon Fiber-Reinforced Composites

    • Amir Bolouri
    • Mohamad Fotouhi
    • William Moseley

    OriginalPaper Open access 03 August 2020 Pages: 4913 - 4921

    

11. Wetting, Interfacial Interactions, and Vacuum Metallization of SnO₂ Ceramics by Liquid Metals and Alloys

    • Tetiana Sydorenko
    • Olexiy Durov
    • Myroslav Karpets

    OriginalPaper 20 August 2020 Pages: 4922 - 4927

    

12. Effect of Tensile Mean Strain on Fatigue Behavior of Al-Li Alloy 2099

    • B. A. Rutherford
    • A. R. Cisko
    • J. B. Jordon

    OriginalPaper 01 August 2020 Pages: 4928 - 4933

    

13. Effect of Ni Content on the Microstructure Formation and Properties of Sn-0.7Cu-xNi Solder Alloys

    • Jianglei Fan
    • Hengtao Zhai
    • Jianxiu Liu

    OriginalPaper 03 August 2020 Pages: 4934 - 4943

    

14. Evaluation of Microstructure and Mechanical Properties of Explosive-Welded HSLA/304L Steel Bimetallic Plates

    • Changqing Ye
    • Qingsong Liu
    • Jianming Zhou

    OriginalPaper 04 August 2020 Pages: 4944 - 4956

    

15. Porosity, Hardness, Friction and Wear Performance Analysis of H13 SLM-Formed Samples

    • Gabriel Awuku Dzukey
    • Ke Yang
    • Wenda Hou

    OriginalPaper 12 August 2020 Pages: 4957 - 4966

    

16. Comparison of AC Corrosion of X80 Steel in Real Soil, Soil Extract Solution, and Simulated Solution

    • Boxin Wei
    • Jin Xu
    • Wei Ke

    OriginalPaper 12 August 2020 Pages: 4967 - 4977

    

17. Effect of Lack of Fusion Formed during Electron Beam Powder Bed Fusion of Ti-6Al-4V Alloy on Impact Toughness

    • Mona Aziziderouei
    • Zhan Chen
    • Yuan Tao

    OriginalPaper 14 August 2020 Pages: 4978 - 4990

    

18. Impact of Boron Nitride Nanoparticles on the Wear Property of Lithium Base Grease

    • Tao Wang
    • ZhanJun Li
    • Qiang He

    OriginalPaper 12 August 2020 Pages: 4991 - 5000

    

19. Study of the Resistance Variation in Intraply/Yarn Kevlar/Glass Composite after Low-Velocity Impact

    • Rayane Dantas da Cunha
    • Ricardo Alex Dantas da Cunha
    • Raimundo Carlos Silverio Freire Júnior

    OriginalPaper 12 August 2020 Pages: 5001 - 5007

    

20. Effects of Nb Addition and Different Cooling Methods on Microstructures and Properties of Cu-Cr Alloys

    • X. H. Yang
    • C. D. Wang
    • S. H. Liang

    OriginalPaper 12 August 2020 Pages: 5008 - 5017

    

21. Formability, Microstructure and Properties of C_xCrNiV Low-Alloy Steel Fabricated by Laser Melting Deposition

    • M. E. Zhang
    • S. Zhang
    • J. B. Zhang

    OriginalPaper 12 August 2020 Pages: 5018 - 5027

    

22. Phase-Species-Dependent Electrochemical and Corrosion Behaviors of Wrought Mg-Y-Zn-Based Alloys

    • Xuan Liu
    • Shengyuan Li
    • Jilai Xue

    OriginalPaper 17 August 2020 Pages: 5028 - 5040

    

23. Linear Reciprocating Wear of Yttria-Stabilized Zirconia-Based Composite Coatings Developed by Thermal Spray

    • Subhasisa Nath
    • Indranil Manna
    • Jyotsna Dutta Majumdar

    OriginalPaper 19 August 2020 Pages: 5041 - 5056

    

24. Corrosion Evolution and Analysis of Welded Joints of Structural Steel Performed in a Tropical Marine Atmospheric Environment

    • Tianyi Zhang
    • Wei Liu
    • Yongmei Yang

    OriginalPaper 20 August 2020 Pages: 5057 - 5068

    

25. Microstructure and Strengthening Mechanism of Ti/Cu Laminated Composite Produced by Underwater Explosive Welding

    • Wei Sun
    • Jian Guo
    • Xiang Chen

    OriginalPaper 18 August 2020 Pages: 5069 - 5079

    

26. Nondestructive Texture Measurement of As-Received Ti Alloy Tubing via Simultaneous Shaping and Tilting Defocusing Correction

    • Lihong Yuan
    • Mengyao Yang
    • Wangfeng Zhang

    OriginalPaper 20 August 2020 Pages: 5080 - 5087

    

27. Manufacturing and Performance Analysis of Q390A High-Strength Steel V-Shaped Stiffeners via Warm Drawing Process

    • Yushi Qi
    • Kefeng Li
    • Zhiming Du

    OriginalPaper 20 August 2020 Pages: 5088 - 5103

    

28. Deformation Mechanism and Constitutive Consideration for Ti-5Al-5Mo-5V-3Cr-1Zr Alloy Compressed at Elevated Temperatures

    • Yuting Zhou
    • Jie Zhou
    • Heping Deng

    OriginalPaper 07 August 2020 Pages: 5104 - 5113

    

29. Analysis on the Fatigue Properties of Shot-Peened Al-Si-Mg Alloy and Its Fatigue Life Prediction

    • Kaixin Su
    • Jiwang Zhang
    • Jinxin Zhang

    OriginalPaper 12 August 2020 Pages: 5114 - 5125

    

30. A Novel Ratiometric Fluorescent Probe for Ag⁺ Based on Arginine-Naphthalene Imide

    • Jing Liu
    • Shan Wang
    • Xiaofang Wang

    OriginalPaper 12 August 2020 Pages: 5126 - 5131

    

31. Nanoscale Barrier Layers to Enable the Use of Gallium-Based Thermal Interface Materials with Aluminum

    • Stephen Stagon
    • Neil Blaser
    • John Nuszkowski

    OriginalPaper 12 August 2020 Pages: 5132 - 5138

    

32. Precise Forming of Complex Magnesium Alloy Components Based on Finite Element Method and Quantitative Preforming Design

    • Xubin Li
    • Henry Hu
    • Qiang Wang

    OriginalPaper 12 August 2020 Pages: 5139 - 5146

    

33. Microstructural Modification and Surface Hardness Improvement in Al-Mo Friction Stir Surface Composites

    • V. P. Mahesh
    • Ashutosh Kumar
    • Amit Arora

    OriginalPaper 13 August 2020 Pages: 5147 - 5157

    

34. Influence of Thick Plate Bending Process on Material Strength Distribution in Hydrogenation Reactor Shells

    • You Li
    • Zhiping Chen
    • Song Huang

    OriginalPaper 12 August 2020 Pages: 5158 - 5173

    

35. Fabrication of NbN-Coated Porous Titanium Sheets for PEM Electrolyzers

    • N. F. Daudt
    • A. D. Schneider
    • L. F. Schelp

    OriginalPaper 12 August 2020 Pages: 5174 - 5183

    

36. Surface Integrity of TA19 Notched Simulated Blades with Laser Shock Peening and Its Effect on Fatigue Strength

    • Junfeng Wu
    • Zhigang Che
    • Rujian Sun

    OriginalPaper 17 August 2020 Pages: 5184 - 5194

    

37. Fullerene Soot-Reinforced Al-Based Composites and Their Densification Via Copper Addition

    • Tatiana V. Larionova
    • Firuz A. Yunusov
    • Oleg V. Tolochko

    OriginalPaper 12 August 2020 Pages: 5195 - 5202

    

38. Influence of Microstructure, Composition and Morphology on Tribological Performance of WTiN Coatings Obtained by DC Magnetron Sputtering at Various Working Pressures

    • R. F. Londoño-Menjura
    • R. Ospina
    • E. Restrepo-Parra

    OriginalPaper 20 August 2020 Pages: 5203 - 5213

    

39. Effect of Weld Parameters on the Microstructure of Aluminum-Copper Joints Produced by Flash Welding

    • A. Shafiei
    • V. Yerevanian
    • D. M. Maijer

    OriginalPaper 14 August 2020 Pages: 5214 - 5226

    

40. Effect of Multiwalled Carbon Nanotubes on Elevated Temperature Tensile and Wear Behavior of Al2024 Matrix Composites Fabricated by Stir Casting and Hot Extrusion

    • Muhammet Emre Turan
    • Muhammad Rashad
    • Muhammad Asif

    OriginalPaper 18 August 2020 Pages: 5227 - 5237

    

41. Investigation on Mechanical Behavior of Friction Stir Welded Nylon-6 Using Temperature Signatures

    • Santosh K. Sahu
    • Raju P. Mahto
    • Kamal Pal

    OriginalPaper 20 August 2020 Pages: 5238 - 5262

    

42. Microstructure and Mechanical Properties of Friction Stir Welded Austenitic-Ferritic Stainless Steels Using Staggered Joint Configuration

    • Guolin Guo
    • Yifu Shen

    OriginalPaper 17 August 2020 Pages: 5263 - 5272

    

43. Microstructures and Mechanical Properties of As-Extruded AZ31−xSm Magnesium Alloy

    • Ming Sun
    • Meijuan Liu
    • Hong Jiang

    OriginalPaper 19 August 2020 Pages: 5273 - 5281

    

44. Corrosion Resistance of Bis-Silane-Modified Epoxy Coatings on an Al-Zn-Mg-Cu Alloy

    • Diping Zeng
    • Zhiyi Liu
    • Jian Wang

    OriginalPaper 19 August 2020 Pages: 5282 - 5290

    

45. Microstructural Evolution and Mechanical Properties of Ti Alloy/Stainless Steel Lap Joints during Cold Metal Transfer Technique with CuSi₃ Filler Wire

    • Gang Li
    • Shengyu Xu
    • Yupeng Guo

    OriginalPaper 20 August 2020 Pages: 5291 - 5306

    

46. Optimization of the Severe Plastic Deformation Processes for the Grain Refinement of Al6060 Alloy Using 3D FEM Analysis

    • E. López-Chipres
    • E. García-Sanchez
    • R. Colás

    OriginalPaper 04 November 2010 Pages: 5307 - 5313

    

47. Evolution of Tensile Properties in AA2219 Plates Due to Varying Modes and Percentages of Cold Work before Artificial Aging

    • A. K. Mukhopadhyay
    • R. K. Gupta
    • P. Sankaravelayutham

    OriginalPaper 12 August 2020 Pages: 5314 - 5321

    

48. Effect of Aging Treatment of Ni-Based/TiC Coatings by Induction Cladding

    • Bensheng Huang
    • Songsong Wu
    • Lingzhi Chen

    OriginalPaper 14 August 2020 Pages: 5322 - 5328

    

49. Evaluation of the Possibility to Obtain Nanostructured Bainite in High-Carbon and High-Silicon 9XC Bearing Steel

    • Dominika Baran
    • Aleksandra Królicka

    OriginalPaper Open access 17 August 2020 Pages: 5329 - 5336

    

50. Effect of Molybdenum on Pit Initiation Rate and Pit Growth Using Electrochemical Noise and Its Correlation with Confocal Laser Scanning Microscopic Studies

    • Namrata Upadhyay
    • A. Ravi Shankar
    • G. Amarendra

    OriginalPaper 07 August 2020 Pages: 5337 - 5345