1. Selected Articles from 30th Heat Treating Society Conference

   • John M. Tartaglia

   Guest Editorial 02 June 2020 Pages: 3461 - 3461

   

2. A Brief Review on Test Systems Using a Ball Probe for Determination of Cooling Characteristics of Quenchants

   • Kyozo Arimoto

   ReviewPaper 06 February 2020 Pages: 3462 - 3475

   

3. Carburizing Heat Treatment of Selective-Laser-Melted 20MnCr5 Steel

   • Mei Yang
   • Richard D. Sisson Jr.

   OriginalPaper 21 January 2020 Pages: 3476 - 3485

   

4. Boro-Austempering Treatment of High-Strength Bainitic Steels

   • Pedro Gabriel Bonella de Oliveira
   • Fábio Edson Mariani
   • George Edward Totten

   OriginalPaper 24 January 2020 Pages: 3486 - 3493

   

5. A Comparative Study on Cooling Performance of Hot Oil and Molten Salt Quench Media for Industrial Heat Treatment

   • K. M. Pranesh Rao
   • K. Narayan Prabhu

   OriginalPaper 11 February 2020 Pages: 3494 - 3501

   

6. Effects of Rapid Induction Heating on Transformations in 0.6% C Steels

   • Robert Cryderman
   • Dalton Garrett
   • Eun Jung Seo

   OriginalPaper 10 February 2020 Pages: 3502 - 3515

   

7. Wear Resistance of Niobium Carbide Layers Produced on Gray Cast Iron by Thermoreactive Treatments

   • Fábio Edson Mariani
   • Galtiere Corrêa Rêgo
   • Luiz Carlos Casteletti

   OriginalPaper 10 February 2020 Pages: 3516 - 3522

   

8. The Effects of Solutionizing Temperature on the Microstructure of Allvac 718Plus

   • Geeta Kumari
   • Carl Boehlert
   • M. Sundararaman

   OriginalPaper 27 February 2020 Pages: 3523 - 3533

   

9. Production and Characterization of Boride and Carbide Layers on AISI 15B30 Steel

   • Rafael Magalhães Triani
   • Lucas Fuscaldi De Assis Gomes
   • Luiz Carlos Casteletti

   OriginalPaper 02 March 2020 Pages: 3534 - 3541

   

10. Effect of Low-Temperature Austempering and Quenching and Partitioning Treatments on Adhesive Wear Resistance of High-Silicon Multiphase Steels

    • Pedro Gabriel Bonella de Oliveira
    • Ricardo Tadeu Junior Aureliano
    • George Edward Totten

    OriginalPaper 02 March 2020 Pages: 3542 - 3550

    

11. Quantitative Analysis of Microstructural Refinement in Simulated Carburized Microstructures

    • M. Agnani
    • O. L. DeNonno
    • S. W. Thompson

    OriginalPaper 09 March 2020 Pages: 3551 - 3559

    

12. Effect of Cooling Path on Precipitation Behavior, Microstructure, and Texture Evolution of Micro-alloyed Magnesium Alloy

    • Yang Liu
    • Jing Su
    • Stephen Yue

    OriginalPaper 16 March 2020 Pages: 3560 - 3567

    

13. Production of Aluminide Layers on AISI 304 Stainless Steel at Low Temperatures Using the Slurry Process

    • Rafael Magalhães Triani
    • Lucas Fuscaldi De Assis Gomes
    • Luiz Carlos Casteletti

    OriginalPaper 01 April 2020 Pages: 3568 - 3574

    

14. Effect of Mo in Combination with Nb on Austenite Grain Size Control in Vacuum Carburizing Steels

    • Eun Jung Seo
    • John G. Speer
    • Robert L. Cryderman

    OriginalPaper 02 April 2020 Pages: 3575 - 3584

    

15. Residual Stress Control on Bearing Steel by Surface Cooled Induction Heating Fast Tempering

    • Wataru Yoshida

    OriginalPaper 09 April 2020 Pages: 3585 - 3592

    

16. Bending Fatigue in Low-Pressure Carbonitriding of Steel Alloys with Boron and Niobium Additions

    • Larissa Vilela Costa
    • Denise Corrêa de Oliveira
    • Kip O. Findley

    ReviewPaper 13 April 2020 Pages: 3593 - 3602

    

17. Taguchi Design for Heat Treatment of Rene 65 Components

    • Christina Maria Katsari
    • Andrew Wessman
    • Stephen Yue

    OriginalPaper 17 April 2020 Pages: 3603 - 3611

    

18. On the Development of Parametrical Water Quenching Heat Transfer Model Using Cooling Curves by ASTM D6200 Quenchometer

    • James Jan
    • D. Scott MacKenzie

    OriginalPaper 24 April 2020 Pages: 3612 - 3625

    

19. Impacts of Machining and Heat Treating Practices on Residual Stresses in Alpha-Beta Titanium Alloys

    • Lesley D. Frame
    • Indranie Rambarran
    • Cameron Sanders

    OriginalPaper 20 May 2020 Pages: 3626 - 3637

    

20. Modeling of Temperature Gradients During Short Time Dilatometry Testing

    • Robert Goldstein
    • Tareq Eddir
    • Andrew Senita

    OriginalPaper 30 May 2020 Pages: 3638 - 3660

    

21. Insights into the High-Temperature Oxidation Behavior of Austenitic Stainless Steel and Influence of Copper on It

    • Juan Li
    • Huaying Li
    • Haitao Liu

    OriginalPaper 25 June 2020 Pages: 3661 - 3669

    

22. Effects of Nitrogen Content and Hot Forming Temperature on Prior Austenite Grain Size and Mechanical Properties for Normalizing Cryogenic Pressure-Vessel Steels

    • Hong Hou
    • Honghong Wang
    • Huan Cai

    OriginalPaper 29 June 2020 Pages: 3670 - 3677

    

23. Modification of Mg₂Si Phase Morphology in Mg-4Si Alloy by Sb and Nd Additions

    • Hao Dong
    • Siming Xiang
    • Wenbin Yu

    OriginalPaper Open access 22 June 2020 Pages: 3678 - 3687

    

24. Study on the Microstructure and Texture Evolution of Hot Forged 20CrMnTiH Steel Spur Bevel Gear by Simulation and Experiment

    • Xuan Hu
    • Lin Hua
    • Xinghui Han

    OriginalPaper 10 June 2020 Pages: 3688 - 3701

    

25. Improvement of Corrosion Resistance of 13CrMo4-5 Steel by Ni-Based Laser Cladding Coatings

    • Damian Koclęga
    • Agnieszka Radziszewska
    • Axel Kranzmann

    OriginalPaper Open access 12 June 2020 Pages: 3702 - 3713

    

26. Microstructural and Tribological Characteristics of In Situ Induced Chrome Carbide Strengthened CoCrFeMnNi High-Entropy Alloys

    • Yaqiu Yu
    • Baosen Zhang
    • Zhangzhong Wang

    OriginalPaper 08 June 2020 Pages: 3714 - 3722

    

27. Surface Mo-Enrichment and Plasma Carburizing on Sintered Iron: Microstructure and Tribological Properties

    • T. Bendo
    • M. L. Hermann
    • A. N. Klein

    OriginalPaper 09 June 2020 Pages: 3723 - 3735

    

28. Effects of Co on Microstructure, Mechanical Properties, and Corrosion Resistance of Ti-Nb-Zr-Co Biological Alloys

    • Jie Zhao
    • Fengcang Ma
    • Daihua He

    OriginalPaper 18 June 2020 Pages: 3736 - 3744

    

29. An Investigation on Anisotropy Behavior and Forming Limit of 5182-H111 Aluminum Alloy

    • Zhaoxuan Hou
    • Zhigang Liu
    • Xu Lu

    OriginalPaper 12 June 2020 Pages: 3745 - 3756

    

30. Microstructure, Tribological Behavior, and Strengthening Mechanisms of the Friction Interface Layer with Nanocrystalline Structure of Ni₃Al Matrix Self-lubricating Composites

    • Yuchun Huang
    • Jianying Liu
    • Haishu Ma

    OriginalPaper 12 June 2020 Pages: 3757 - 3766

    

31. Fabrication Technique and Characterization of Aluminum Alloy-Based Porous Composite Infiltrated with Babbitt Alloy

    • Lenko Stanev
    • Mihail Kolev
    • Boyko Krastev

    OriginalPaper 18 June 2020 Pages: 3767 - 3773

    

32. Surface Severe Plastically Deformed Nanostructured AA7075 Alloy: Assessment on Tribological and Axial Fatigue Behaviors

    • Yusuf Efe
    • Ibrahim Karademir
    • Okan Unal

    OriginalPaper 15 June 2020 Pages: 3774 - 3783

    

33. In Situ Synthesis of Polycrystalline Cubic Boron Nitride Reinforced by Different Morphologic TiB₂

    • Shenglin Zhong
    • Chuan Chen
    • Yi Wu

    OriginalPaper 19 June 2020 Pages: 3784 - 3791

    

34. Analysis of the Impact of the Consolidated Material on the Morphology of Briquettes Produced in a Roller Press

    • Michał Bembenek
    • Amelia Zięba
    • Janusz Krawczyk

    OriginalPaper Open access 22 June 2020 Pages: 3792 - 3799

    

35. Characterization of the Interfacial Zone Between a HIPed Fe-Based Alloy and a Stainless Steel Container

    • A. Tellier
    • M. R. Ardigo-Besnard
    • J.-M. Fioriani

    OriginalPaper 18 June 2020 Pages: 3800 - 3811

    

36. Enhanced Mechanical Properties of a Gradient Nanostructured Medium Manganese Steel and Its Grain Refinement Mechanism

    • Lei Wang
    • Meiyu Li
    • Yuntao Xi

    OriginalPaper 25 June 2020 Pages: 3812 - 3823

    

37. Influence of Crystallographic Texture on the Corrosion Product Morphology and Corrosion Rate of AZ31 Plate in Simulated Body Fluid

    • Hossein Aghamohammadi
    • Seyed Jamal Hosseinipour
    • Roohollah Jamaati

    OriginalPaper 19 June 2020 Pages: 3824 - 3830

    

38. Factors Influencing the Corrosion Behavior of Direct Metal Laser Sintered Ti-6Al-4V for Biomedical Applications

    • Zhaotong Yang
    • Yangzi Xu
    • Jianyu Liang

    OriginalPaper 26 June 2020 Pages: 3831 - 3839

    

39. Cavitation Erosion and Corrosion Behavior of NiTi Cladding with Cu and Nb Interlayers

    • Z. P. Shi
    • Z. B. Wang
    • Y. G. Zheng

    OriginalPaper 22 June 2020 Pages: 3840 - 3851

    

40. Spheroidization Mechanism of Lamellar δ Phase in Inconel 718 during Delta Processing

    • Hong-yan Gan
    • Ming Cheng
    • Shi-hong Zhang

    OriginalPaper 22 June 2020 Pages: 3852 - 3857

    

41. Hot Deformation Behavior and Processing Maps of a 9Ni590B Steel

    • Rongbin Li
    • Yongqiang Chen
    • Tongtong Chen

    OriginalPaper 22 June 2020 Pages: 3858 - 3867

    

42. Carbide Evolution in High-Carbon Martensitic Stainless Cutlery Steels during Austenitizing

    • Yudan Yang
    • Hongshan Zhao
    • Han Dong

    OriginalPaper 23 June 2020 Pages: 3868 - 3875

    

43. Microstructure, Texture and Mechanical Properties of Al-Mg-Si Alloy Processed by Multiaxial Compression

    • Abir Roy
    • Manish Tiwari
    • Abhishek Kumar

    OriginalPaper 25 June 2020 Pages: 3876 - 3888

    

44. Forming Features at Screw Rolling of Austenitic Stainless-Steel Billets

    • M. M. Skripalenko
    • B. A. Romantsev
    • S. O. Rogachev

    OriginalPaper 12 June 2020 Pages: 3889 - 3894

    

45. Computational Investigation of Interface Stresses in Duplex Structure Stainless Steels

    • Ramana M. Pidaparti
    • Israr Bin M. Ibrahim
    • Appajosula S. Rao

    OriginalPaper 15 June 2020 Pages: 3895 - 3905

    

46. Effect of Stress State in Rolling Deformation Zone of AZ31 Magnesium Alloy Plate on Edge Cracking

    • Zhiquan Huang
    • Chuanlu Qi
    • Chenchen Zhi

    OriginalPaper 15 June 2020 Pages: 3906 - 3912

    

47. A Virtual-Strain-Energy-Density-Based Critical-Plane Criterion to Multiaxial Fatigue Life Prediction

    • Jing Li
    • Yuan-ying Qiu
    • Lei Gao

    OriginalPaper 30 June 2020 Pages: 3913 - 3920

    

48. The Corrosion Resistance Mechanism of Fe-Based Amorphous Coatings Synthesised by Detonation Gun Spraying

    • Weichao Ning
    • Haimin Zhai
    • Xuqiang Li

    OriginalPaper 08 June 2020 Pages: 3921 - 3929

    

49. Reciprocating Sliding Wear of Cu, Cu-SiC Functionally Graded Coating on Electrical Contact

    • Swastika Banthia
    • Mohammad Amid
    • Karabi Das

    OriginalPaper 13 June 2020 Pages: 3930 - 3940

    

50. Prediction of Forming of AA 5052-H32 Sheets under Impact Loading and Experimental Validation

    • Saibal Kanchan Barik
    • R. Ganesh Narayanan
    • Niranjan Sahoo

    OriginalPaper 15 June 2020 Pages: 3941 - 3960