1. The International Symposium on Dynamic Response and Failure of Composite Materials, Draf2018

   • Valentina Lopresto
   • Antonello Astarita
   • Arun Shukla

   Guest Editorial 03 July 2019 Pages: 3157 - 3160

   

2. Wave Theory of Impact and Professor Yury Rossikhin Contribution in the Field (A Memorial Survey)

   • Marina V. Shitikova

   ReviewPaper 03 January 2019 Pages: 3161 - 3173

   

3. Effect of Prolonged Ultraviolet Radiation Exposure on the Blast Response of Fiber Reinforced Composite Plates

   • Carlos Javier
   • Taylor Smith
   • Arun Shukla

   OriginalPaper 14 February 2019 Pages: 3174 - 3185

   

4. Study of the Effects of Materials Selection for the Closeout Structure on the Service Life of a Liquid Rocket Engine Thrust Chamber

   • M. Ferraiuolo
   • A. Riccio

   OriginalPaper 12 February 2019 Pages: 3186 - 3195

   

5. Impact Behavior of Polyester GFRP for Naval Applications: Influence of the Clamping Device and Fluid–Material Interaction

   • M. R. Ricciardi
   • Ilaria Papa
   • A. Langella

   OriginalPaper 12 February 2019 Pages: 3196 - 3202

   

6. Experimental Study of the Influence of a Tensile Preload on Thin Woven Composite Laminates Under Impact Loading

   • T. Langella
   • A. Rogani
   • A. Langella

   OriginalPaper 13 February 2019 Pages: 3203 - 3210

   

7. Manufacturing of a Metal Matrix Composite Coating on a Polymer Matrix Composite Through Cold Gas Dynamic Spray Technique

   • Alessia Serena Perna
   • Antonio Viscusi
   • Raffaele Sansone

   OriginalPaper 12 February 2019 Pages: 3211 - 3219

   

8. Interaction of Water with Carbon Fiber Reinforced Polymer Laminates under Dynamic Loading Conditions

   • V. Lopresto
   • A. Langella
   • I. Papa

   OriginalPaper 14 February 2019 Pages: 3220 - 3227

   

9. Crashworthiness of a Composite Wing Section: Numerical Investigation of the Bird Strike Phenomenon by Using a Coupled Eulerian–Lagrangian Approach

   • Salvatore Saputo
   • Andrea Sellitto
   • Francesco Di Caprio

   OriginalPaper 21 February 2019 Pages: 3228 - 3238

   

10. Experimental and Numerical Investigation of PZT Response in Composite Structures with Variable Degradation Levels

    • Vittorio Memmolo
    • Hassan Elahi
    • Paolo Gaudenzi

    OriginalPaper 10 April 2019 Pages: 3239 - 3246

    

11. Analytical Model of High-Velocity Impact of a Deformable Projectile Against Textile-Based Composites

    • R. Scazzosi
    • A. Manes
    • M. Giglio

    OriginalPaper 15 April 2019 Pages: 3247 - 3255

    

12. Impact Damage Behavior of Vinyl Ester-, Epoxy-, and Nylon 6-Based Basalt Fiber Composites

    • P. Russo
    • G. Simeoli
    • V. Lopresto

    OriginalPaper 15 April 2019 Pages: 3256 - 3266

    

13. Sensitivity Analysis of Material Model Parameters to Reproduce Crushing of Composite Tubes

    • S. Boria

    OriginalPaper 26 April 2019 Pages: 3267 - 3280

    

14. Interaction of Guided Waves with Delamination in a Bilayered Aluminum-Composite Pressure Vessel

    • Mauro Parodi
    • Cosima Fiaschi
    • Leandro Maio

    OriginalPaper 17 May 2019 Pages: 3281 - 3291

    

15. Manufacturing and Validation of a Novel Composite Component for Aircraft Main Landing Gear Bay

    • M. Viscardi
    • M. Arena
    • S. Inserra Imparato

    OriginalPaper 23 May 2019 Pages: 3292 - 3300

    

16. Impact Damage Investigation on Glass Fiber-Reinforced Plate Laminates at Room and Lower Temperatures through Ultrasound Testing and Electronic Speckle Pattern Interferometry

    • Vito Pagliarulo
    • Ilaria Papa
    • Pietro Ferraro

    OriginalPaper 05 June 2019 Pages: 3301 - 3308

    

17. An Integrated Numerical Method to Predict the Strain Sensing Behavior of Flexible Conductive Fibers under Electric–Thermal Conditions

    • H. Wang
    • P. Xue
    • W. L. Zhu

    OriginalPaper 22 May 2019 Pages: 3309 - 3319

    

18. Microstructure Characteristics and Comparative Analysis of Constitutive Models for Flow Stress Prediction of Inconel 718 Alloy

    • Gauri Mahalle
    • Nitin Kotkunde
    • Y. C. Lin

    OriginalPaper 28 May 2019 Pages: 3320 - 3331

    

19. Parametric Study of Cyclic Plasticity Behavior in a Directionally Solidified Superalloy with Partial Recrystallization by Crystal Plasticity Finite Element Simulation

    • Xianfeng Ma
    • Donghui Wei
    • Hui-ji Shi

    OriginalPaper 31 May 2019 Pages: 3332 - 3340

    

20. Mechanism of Nonequilibrium Formation of Novel Interface Structures in Explosive Welding

    • Yanshu Fu
    • Mingzhen Shi

    OriginalPaper 03 June 2019 Pages: 3341 - 3348

    

21. Numerical Simulation of Residual Stress for Laser Welding of Ti-6Al-4V Alloy Considering Solid-State Phase Transformation

    • Lingda Xiong
    • Gaoyang Mi
    • Ping Jiang

    OriginalPaper 07 June 2019 Pages: 3349 - 3360

    

22. Numerical Simulation of Residual Stresses in Multipass Gas Metal Arc-Welded Joints of Thick Aluminum Alloy Plates

    • Fengyuan Shu
    • Lei Wu
    • Binshi Xu

    OriginalPaper 18 June 2019 Pages: 3361 - 3371

    

23. Wear Behavior of Vanadium and V-Ti-Ta Alloys under Reciprocating Sliding Conditions

    • U. Jain
    • K. Sairam
    • R. Tewari

    OriginalPaper 14 May 2019 Pages: 3372 - 3380

    

24. Tribological Properties and Self-Repairing Functionality of Ti6Al4V-Multilayer Graphene-Ag Composites

    • Hongyan Zhou
    • Xiaoliang Shi
    • Yuan Chen

    OriginalPaper 15 May 2019 Pages: 3381 - 3392

    

25. Notch Tensile Behavior of the Mg-Zn-Gd-Zr Alloy

    • B. P. Chiranth
    • C. Siddaraju
    • T. Ram Prabhu

    OriginalPaper 17 May 2019 Pages: 3393 - 3401

    

26. Dry Sliding Behavior of a TiZr-Based Alloy under Air and Vacuum Conditions

    • L. Q. Yang
    • H. Zhong
    • R. P. Liu

    OriginalPaper 22 May 2019 Pages: 3402 - 3412

    

27. High-Cycle Fatigue Behavior of Vacuum-Carburized 20Cr2Ni4 Steel with Different Case Depths

    • Na Xiao
    • Weijun Hui
    • Han Dong

    OriginalPaper 03 June 2019 Pages: 3413 - 3422

    

28. The Effects of Carburization on the Fatigue Crack Growth Behaviors of Local Surface Cracks in Cylindrical Bars

    • Feng-peng Yang
    • Te Chen
    • Yun-chao Lu

    OriginalPaper 03 June 2019 Pages: 3423 - 3429

    

29. Room-Temperature Microstructural Evolution of Extruded AM80 Magnesium Alloys under Dynamic Loading

    • Pengcheng Guo
    • Luoxing Li
    • Guan Wang

    OriginalPaper 04 June 2019 Pages: 3430 - 3437

    

30. Failure Analysis of Three-Sheet Stackup Structure Made of Dissimilar High-Strength Steel

    • Jiangwei Ren
    • Wanpeng Dong
    • Zhishui Yu

    OriginalPaper 18 June 2019 Pages: 3438 - 3445

    

31. Effect of Carbon Nanotube Concentration on the Corrosion Behavior of Electroless Ni-B-CNT Coating

    • S. Yazdani
    • F. Mahboubi
    • O. Sharifahmadian

    OriginalPaper 24 June 2019 Pages: 3446 - 3459

    

32. Studying the Wettability and Reactivity of Liquid Si-Ti Eutectic Alloy on Glassy Carbon

    • Donatella Giuranno
    • Natalia Sobczak
    • Rada Novakovic

    OriginalPaper 18 June 2019 Pages: 3460 - 3467

    

33. Study of Static Recrystallization Behavior of a Mg-6Al-3Sn Alloy

    • Gaurav Gaurav
    • R. Sarvesha
    • Jayant Jain

    OriginalPaper 16 May 2019 Pages: 3468 - 3477

    

34. Laser 3D Printing of Fe-Based Bulk Metallic Glass: Microstructure Evolution and Crack Propagation

    • Fei Xie
    • Qingjun Chen
    • Yulong Li

    OriginalPaper 17 May 2019 Pages: 3478 - 3486

    

35. A Comparative Study of Constitutive Characteristics and Microstructure Evolution between Uniaxial and Plane Strain Compression of an AA6061 Alloy

    • Fangcheng Qin
    • Huiping Qi
    • Yongtang Li

    OriginalPaper 22 May 2019 Pages: 3487 - 3497

    

36. Microstructure Evolution and Mechanical Properties of Large-Scale AZ80 Magnesium Alloy Billets Produced by Multitemperature Multidirectional Forging

    • Qiang Chen
    • Jun Lin
    • Baoguo Yuan

    OriginalPaper 22 May 2019 Pages: 3498 - 3504

    

37. Grain Refinement Mechanism and Microstructural Evolution of M50NiL Steel during Multi-directional Impact Forging

    • Hongwei Jiang
    • Ying Liu
    • Yingying Zong

    OriginalPaper 22 May 2019 Pages: 3505 - 3516

    

38. A Study on the Surface Composition and Migration of Materials and Their Effect on Surface Microhardness during Micro-EDM of Ti-6Al-4V

    • Muhammad P. Jahan
    • Farshid Alavi

    OriginalPaper 28 May 2019 Pages: 3517 - 3530

    

39. The Application of Canned Deformation to a Hard-Deformed Spray-Deposited Al-Zn-Mg-Cu Alloy

    • Haichao Li
    • Fuyang Cao
    • Jianfei Sun

    OriginalPaper 28 May 2019 Pages: 3531 - 3538

    

40. Interaction of Strain Refined Precipitates and Recrystallized Grains in Nb-Ti Microalloyed Steel during Continuous Casting, Hot-Core Heavy Reduction Rolling, and Reheating Process

    • Meina Gong
    • Haijun Li
    • Raja Devesh Kumar Misra

    OriginalPaper 04 June 2019 Pages: 3539 - 3550

    

41. Dynamic Recrystallization and Metal Flow Behavior of AZ31 Magnesium Alloy Bending Products Processed by Staggered Extrusion

    • Yan Peng Wang
    • Feng Li
    • Wen Bin Fang

    OriginalPaper 06 June 2019 Pages: 3551 - 3559

    

42. Effects of Transition Layer on Bending Resistance in Copper-Clad Aluminum Composite Casting

    • Shuying Chen
    • Lei Zhang
    • Guowei Chang

    OriginalPaper 18 June 2019 Pages: 3560 - 3566

    

43. Prediction of Post-deformation Recrystallization Kinetics in AISI 321 Austenitic Stainless Steel Using Double-Stage Hot Compression

    • M. Shaban Ghazani
    • B. Eghbali

    OriginalPaper 18 June 2019 Pages: 3567 - 3575

    

44. Strength Variation in Processing Multiport Extrusion Tubes of A1100 and A3102 Alloys

    • Kai Li
    • Dayong Li
    • Yinghong Peng

    OriginalPaper 18 June 2019 Pages: 3576 - 3589

    

45. The Effect of Multistage Aging on Mechanical Properties and Microstructure of Forged 7050 Aluminum Alloys

    • Ye Chen
    • Zhiyi Liu
    • Guanhua Liu

    OriginalPaper 22 May 2019 Pages: 3590 - 3599

    

46. Mechanical and Electrochemical Behavior of Dual-Phase Steels Having Varying Ferrite–Martensite Volume Fractions

    • Satendra Kumar
    • Avinash Kumar
    • S. Manjini

    OriginalPaper 22 May 2019 Pages: 3600 - 3613

    

47. Morphological Evolution of S-Phase in 2024 Aluminum under Tensile Creep at 448-463 K

    • Dongbo Wei
    • Kai Yang
    • Zhengjun Yao

    OriginalPaper 31 May 2019 Pages: 3614 - 3621

    

48. Effect of Local Postweld Heat Treatments on Metal Inert Gas-Welded A7N01S-T5 Joints

    • Pengcheng Zhao
    • Honglei Tang
    • Jiajing Pan

    OriginalPaper 03 June 2019 Pages: 3622 - 3629

    

49. The Effect of a Partitioning Process on the Reversed Austenite and Mechanical Properties of Fe-13Cr-3Ni-2Cu-0.1C Alloy

    • Yan-hui Guo
    • Zhi-yong Fang
    • Xiang-tao Deng

    OriginalPaper 19 June 2019 Pages: 3630 - 3637

    

50. Development of Texture in Ultrafine-Grained Low-Carbon Steel Processed through Equal-Channel Angular Pressing

    • Raj Bahadur Singh
    • Deepa Verma
    • R. Manna

    OriginalPaper 14 May 2019 Pages: 3638 - 3651