1. Special Issue Focus: 11th International Conference on Advanced Computational Engineering and Experimenting, ACE-X 2017 and 13th International Conference on Diffusion in Solids and Liquids—DSL2017

   • Andreas Öchsner

   Guest Editorial 31 January 2019 Pages: 1271 - 1271

   

2. The Atomic Structure of Ti₂C and Ti₃C₂ MXenes is Responsible for Their Antibacterial Activity Toward E. coli Bacteria

   • Agnieszka Maria Jastrzębska
   • Ewa Karwowska
   • Andrzej Olszyna

   OriginalPaper 23 February 2018 Pages: 1272 - 1277

   

3. Structural and Mechanical Properties of the ZrC/Ni-Nanodiamond Coating Synthesized by the PVD and Electroplating Processes for the Cutting Knifes

   • V. Chayeuski
   • V. Zhylinski
   • G. Mikalauskas

   OriginalPaper 17 April 2018 Pages: 1278 - 1285

   

4. Syntheses and Characterization of Intermetallic Nanostructures Based on Mn

   • M. Dakiche
   • L. Belaid
   • M. Azzaz

   OriginalPaper 19 June 2018 Pages: 1286 - 1292

   

5. Understanding Microstructural Evolution During Rapid Heat Treatment of Microalloyed Steels Through Computational Modeling, Advanced Physical Simulation, and Multiscale Characterization Techniques

   • B. M. Whitley
   • J. G. Speer
   • J. Klemm-Toole

   OriginalPaper 12 February 2019 Pages: 1293 - 1300

   

6. Microstructural Evolution and Toughness of the Various HAZs in 1300-MPa-Grade Ultrahigh-Strength Structural Steel

   • Changfei Wen
   • Xiangtao Deng
   • Raja Devesh Kumar Misra

   OriginalPaper 24 January 2019 Pages: 1301 - 1311

   

7. Effects of Solution Treatment on Microstructure Transformation, Tensile and Exfoliation Corrosion Properties of 7136 Aluminum Alloy

   • Junlong Zhang
   • Jingyuan Li
   • Dan Lv

   OriginalPaper 15 February 2019 Pages: 1312 - 1323

   

8. Texture Evolution and Its Effect on Fatigue Crack Propagation in Two 2000 Series Alloys

   • Fei Liu
   • Zhiyi Liu
   • Song Bai

   OriginalPaper 14 February 2019 Pages: 1324 - 1336

   

9. Influence of Thermal Treatment on the Microstructure, Mechanical Properties, and Corrosion Resistance of Newly Developed Ti20Nb13Zr Biomedical Alloy in a Simulated Body Environment

   • M. A. Hussein
   • M. Azeem
   • A. A. Sorour

   OriginalPaper 12 February 2019 Pages: 1337 - 1349

   

10. Characterization of Directional Elastoplastic Properties of Al/Cu Bimetallic Sheet

    • Robert Uscinowicz

    OriginalPaper Open access 13 February 2019 Pages: 1350 - 1359

    

11. Protective Performance of Plasma-Enhanced Chemical Vapor-Deposited Ethyl Cyclohexane Coating on Magnesium Alloys

    • Srinivasan Arthanari
    • Antony Ananth
    • Kwang Seon Shin

    OriginalPaper 20 February 2019 Pages: 1360 - 1372

    

12. Computational Modeling of Fracture Toughness of Al-Si and Al-Zn-Mg-Cu Alloys with Detected Porosity

    • Jarosław Piekło
    • Aldona Garbacz-Klempka
    • Marcin Małysza

    OriginalPaper Open access 19 February 2019 Pages: 1373 - 1381

    

13. Effect of Grain Refining on Properties of a Cast Superaustenitic Stainless Steel

    • Dustin A. Arvola
    • Mark C. Emmendorfer
    • Laura N. Bartlett

    OriginalPaper 26 February 2019 Pages: 1382 - 1390

    

14. Importance of Martensite Spatial Distribution at Large Volume Fractions in Imparting Ductility in High-Strength Dual-Phase Steel

    • Nand Kumar Patel
    • Mahesh Gulab Walunj
    • B. Ravi Kumar

    OriginalPaper 11 February 2019 Pages: 1391 - 1401

    

15. Effect of pH on Corrosion Performance of Cu-Se and Cu-Se-Te Alloys in 3.5% Sodium Chloride Solution

    • Ruijie Huang
    • Dachuan Zhu

    OriginalPaper 14 February 2019 Pages: 1402 - 1409

    

16. Effects of Nb on Superelasticity and Low Modulus Properties of Metastable β-Type Ti-Nb-Ta-Zr Biomedical Alloys

    • Juan Chen
    • Fengcang Ma
    • Qingyou Han

    OriginalPaper 13 February 2019 Pages: 1410 - 1418

    

17. Glass-Forming Ability, Thermal Stability, and Hardness of Rapidly Solidified Al-Ni-Y-Sc Alloy Ribbons and Rods

    • Chih-Yuan Chen
    • Shih-Fan Chen
    • Jun-Huang Zhang

    OriginalPaper 26 February 2019 Pages: 1419 - 1427

    

18. Experimental and Numerical Investigations of Cyclic Plastic Deformation of Al-Mg Alloy

    • Pankaj Kumar
    • Akhilendra Singh

    OriginalPaper 27 February 2019 Pages: 1428 - 1440

    

19. In Vitro Degradation, Antibacterial Activity and Cytotoxicity of Mg-3Zn-xAg Nanocomposites Synthesized by Mechanical Alloying for Implant Applications

    • Mahmood Razzaghi
    • Masoud Kasiri-Asgarani
    • Hamid Ghayour

    OriginalPaper 20 February 2019 Pages: 1441 - 1455

    

20. Electrochemical Properties of Commercially Pure Ti with TiB/TiB₂ Coatings in Hanks’ Balanced Salt Solution

    • Adib Ebrahimi
    • Hamid Esfahani
    • Omid Imantalab

    OriginalPaper 27 February 2019 Pages: 1456 - 1468

    

21. Corrosion of 907 Steel Influenced by Sulfate-Reducing Bacteria

    • Juna Chen
    • Jiajia Wu
    • Faqi Tan

    OriginalPaper 19 February 2019 Pages: 1469 - 1479

    

22. Evolution of Crystallographic Structure of M₂₃C₆ Carbide Under Thermal Aging of P91 Steel

    • Arūnas Baltušnikas
    • Albertas Grybėnas
    • Vidas Makarevičius

    OriginalPaper 14 February 2019 Pages: 1480 - 1490

    

23. Tribological Properties of Cr(Si)CN Coatings Sliding Against Different Mating Balls in Water

    • Zhiwei Wu
    • Qianzhi Wang
    • Fei Zhou

    OriginalPaper 27 February 2019 Pages: 1491 - 1499

    

24. Electrochemical Behavior of Steel in Concrete Under Wet and Dry Condition with NaCl Solution

    • Toshiyasu Nishimura

    OriginalPaper 15 February 2019 Pages: 1500 - 1508

    

25. Structure and Tribological Properties of CrTiAlCN Coatings with Various Carbon Contents

    • Maoda Zhang
    • Fei Zhou
    • Jizhou Kong

    OriginalPaper 13 February 2019 Pages: 1509 - 1521

    

26. Structure, Morphology, and Mechanical Properties of AlCrN Coatings Deposited by Cathodic Arc Evaporation

    • Adam Gilewicz
    • Roman Jedrzejewski
    • Bogdan Warcholinski

    OriginalPaper Open access 14 February 2019 Pages: 1522 - 1531

    

27. Effect of Microstructure and Properties of Ni-WC Composite Coatings on Their Solid Particle Erosion Behavior

    • Sima A. Alidokht
    • Jacques Lengaigne
    • Richard R. Chromik

    OriginalPaper 28 February 2019 Pages: 1532 - 1543

    

28. Microstructure and Properties of AlCoCrFeNiTi High-Entropy Alloy Coating on AISI1045 Steel Fabricated by Laser Cladding

    • Hao Liu
    • Jian Liu
    • Xianhua Tian

    OriginalPaper 21 February 2019 Pages: 1544 - 1552

    

29. Effects of the Addition of Micro-amounts of Calcium on the Corrosion Resistance of Mg-0.1Mn-1.0Zn-xCa Biomaterials

    • Jin Wang
    • Jing-Yuan Li
    • Wei-Ming Yu

    OriginalPaper 05 March 2019 Pages: 1553 - 1562

    

30. Microstructure and Mechanical Characterization of Incoloy 925 Welds in the As-Welded and Direct Aged Conditions

    • S. Sujai
    • K. Devendranath Ramkumar

    OriginalPaper 05 March 2019 Pages: 1563 - 1580

    

31. Study on Tensile Deformation Behavior of TC21 Titanium Alloy

    • Song Zhang
    • Yilong Liang
    • Meigui Ou

    OriginalPaper 27 February 2019 Pages: 1581 - 1590

    

32. Modeling the Work Hardening Behavior of High-Manganese Steels

    • M. Ghasri-Khouzani
    • J. R. McDermid

    OriginalPaper 13 February 2019 Pages: 1591 - 1600

    

33. Multiaxial creep–fatigue Life Prediction Under Variable Amplitude Loading at High Temperature

    • Xiao-Wei Wang
    • De-Guang Shang
    • Zhen-Kun Guo

    OriginalPaper 19 February 2019 Pages: 1601 - 1611

    

34. Nonlinear Creep Deformation of Polycarbonate at High Stress Level: Experimental Investigation and Finite Element Modeling

    • Daiki Ikeshima
    • Akihiro Matsuzaki
    • Akio Yonezu

    OriginalPaper 19 February 2019 Pages: 1612 - 1617

    

35. Experimental Investigation and Numerical Study on the Elimination of Porosity in Aluminum Alloy Laser Welding and Laser–GMA Welding

    • Lijin Huang
    • Xueming Hua
    • Li Fang

    OriginalPaper 04 March 2019 Pages: 1618 - 1627

    

36. Experimental Analysis of the Crushing of Honeycomb Cores Under Compression

    • Boubekeur Mohammed Bilel Mertani
    • Boualem Keskes
    • Mostapha Tarfaoui

    OriginalPaper 23 January 2019 Pages: 1628 - 1638

    

37. Development of Low-Alloy Steels with High Strength and Good Ductility with the Aid of Nanoscale Troostite

    • J. W. Liang
    • X. Wang
    • Y. F. Shen

    OriginalPaper 22 January 2019 Pages: 1639 - 1649

    

38. Wear and Corrosion Behavior of Graphene-Nanoplate-Reinforced Copper Matrix Composites Prepared Through Electrostatic Self-Assembly

    • Ke Zhang
    • Guosen Shao
    • Ping Liu

    OriginalPaper 21 February 2019 Pages: 1650 - 1660

    

39. Significant Contribution to Strength Enhancement from Deformation Twins in Thermomechanically Processed Al_0.1CoCrFeNi Microstructures

    • Sindhura Gangireddy
    • Daniel Whitaker
    • Rajiv S. Mishra

    OriginalPaper 31 January 2019 Pages: 1661 - 1667

    

40. Tribological Properties of Typical Zeolitic Imidazolate Frameworks as Grease-Based Lubricant Additives

    • Min Yuan
    • Yu Zhao
    • Jinxiang Dong

    OriginalPaper 12 February 2019 Pages: 1668 - 1677

    

41. Effect of Silicon Content on the Hardenability and Mechanical Properties of Link-Chain Steel

    • Zhenhua Wang
    • Jianjun Qi
    • Yi Liu

    OriginalPaper 27 February 2019 Pages: 1678 - 1684

    

42. Dry Sliding Wear Behavior and Mechanism of a Hot-Dip Aluminized Steel as a Function of Sliding Velocity

    • Yubiao Yang
    • Benguo Zhang
    • Shuqi Wang

    OriginalPaper 12 February 2019 Pages: 1685 - 1697

    

43. Corrosion Behavior of Pipeline Steel with Different Microstructures Under AC Interference in Acid Soil Simulation Solution

    • M. Zhu
    • Y. F. Yuan
    • C. W. Du

    OriginalPaper 14 February 2019 Pages: 1698 - 1706

    

44. Sulfide Stress Corrosion Cracking Behavior of G105 and S135 High-Strength Drill Pipe Steels in H₂S Environment

    • Sheji Luo
    • Ming Liu
    • Xiuzhou Lin

    OriginalPaper 13 February 2019 Pages: 1707 - 1718

    

45. Bioceramic Coating Produced on AZ80 Magnesium Alloy by One-Step Microarc Oxidation Process

    • Ying Xiong
    • Zengyuan Yang
    • Renguo Song

    OriginalPaper 12 February 2019 Pages: 1719 - 1727

    

46. Effects of Chloride and Carbonate on Corrosion of API-X100 Pipeline Steel

    • Faysal Fayez Eliyan
    • Hatem M. Alsyouri

    OriginalPaper 19 February 2019 Pages: 1728 - 1733

    

47. Planar Anisotropy, Tension–Compression Asymmetry, and Deep Drawing Behavior of Commercially Pure Titanium at Room Temperature

    • P. Lin
    • Y. G. Hao
    • D. S. Gao

    OriginalPaper 24 January 2019 Pages: 1734 - 1744

    

48. Effect of Cu Interlayer on the Microstructure and Strength for Brazing of Tungsten/316L Steel

    • Meng Wang
    • Yuanting Chen
    • Yucheng Wu

    OriginalPaper 25 January 2019 Pages: 1745 - 1752

    

49. The Effect of Casting Speed on Microstructure, Microsegregation, and Mechanical Properties of High-Strength Mg-Nd-Zn-Zr Alloy

    • Xingwei Zheng
    • Peng Luo
    • Shiming Wang

    OriginalPaper 26 February 2019 Pages: 1753 - 1761

    

50. Structure and Mechanical Properties of Steel in the Process “Pressing–Drawing”

    • Abdrakhman Naizabekov
    • Irina Volokitina
    • Evgeniy Panin

    OriginalPaper 24 January 2019 Pages: 1762 - 1771