1. Static Recrystallization Behavior of Z12CN13 Martensite Stainless Steel

   • Min Luo
   • Bing Zhou
   • Yan-hui Guo

   OriginalPaper 14 August 2017 Pages: 4157 - 4165

   

2. Prospects of In-Situ α-Al₂O₃ as an Inoculant in Aluminum: A Feasibility Study

   • V. M. Sreekumar
   • N. Hari Babu
   • D. G. Eskin

   OriginalPaper Open access 21 August 2017 Pages: 4166 - 4176

   

3. The Effect of Wetting Gravity Regime on Shear Strength of SAC and Sn-Pb Solder Lap Joints

   • Mrunali Sona
   • K. Narayan Prabhu

   OriginalPaper 16 August 2017 Pages: 4177 - 4187

   

4. Effect of Copper on Corrosion of Forged AlSi1MgMn Automotive Suspension Components

   • Serhan Koktas
   • Emre Gokcil
   • Yucel Birol

   OriginalPaper 30 August 2017 Pages: 4188 - 4196

   

5. Study on the Hot Workability of SiCp/Al Composites Based on a Critical Strain Map

   • Yuan Zhanwei
   • Li Fuguo
   • Wang Chunwei

   OriginalPaper 16 August 2017 Pages: 4197 - 4205

   

6. Processing–Microstructure–Crystallographic Texture–Surface Property Relationships in Friction Stir Processing of Titanium

   • Sumit Bahl
   • P. L. Nithilaksh
   • Kaushik Chatterjee

   OriginalPaper 29 August 2017 Pages: 4206 - 4216

   

7. Cast Iron Inoculation Enhanced by Supplementary Oxy-sulfides Forming Elements

   • Iulian Riposan
   • Stelian Stan
   • Ion Stefan

   OriginalPaper 30 August 2017 Pages: 4217 - 4226

   

8. The Microstructural Evolution and Special Flow Behavior of Ti-5Al-2Sn-2Zr-4Mo-4Cr During Isothermal Compression at a Low Strain Rate

   • J. Z. Sun
   • M. Q. Li
   • H. Li

   OriginalPaper 01 September 2017 Pages: 4227 - 4234

   

9. Effect of Stand-Off Distance on the Microstructure and Mechanical Properties of Ni/Al/Ni Laminates Prepared by Explosive Bonding

   • Xunzhong Guo
   • Yannan Ma
   • Minyu Fan

   ReviewPaper 05 September 2017 Pages: 4235 - 4244

   

10. Sodium Hypochlorite Treatment and Nitinol Performance for Medical Devices

    • J. D. Weaver
    • E. J. Gutierrez
    • M. Di Prima

    OriginalPaper 01 September 2017 Pages: 4245 - 4254

    

11. An Investigation into the Corrosion Behavior of MgO/ZrO₂ Nanocomposite Coatings Prepared by Plasma Electrolytic Oxidation on the AZ91 Magnesium Alloy

    • Nasrollah Eslamzadeh
    • Reza Ebrahimi-Kahrizsangi
    • Farhad Gharavi

    OriginalPaper 05 September 2017 Pages: 4255 - 4264

    

12. Superplastic Forming/Diffusion Bonding Without Interlayer of 5A90 Al-Li Alloy Hollow Double-Layer Structure

    • Shaosong Jiang
    • Yong Jia
    • Kaifeng Zhang

    OriginalPaper 05 September 2017 Pages: 4265 - 4273

    

13. AA6082 to DX56-Steel Laser Brazing: Process Parameter–Intermetallic Formation Correlation

    • D. Narsimhachary
    • S. Pal
    • A. Basu

    OriginalPaper 05 September 2017 Pages: 4274 - 4281

    

14. Preparation of Phytic Acid/Silane Hybrid Coating on Magnesium Alloy and Its Corrosion Resistance in Simulated Body Fluid

    • Fengwu Wang
    • Shu Cai
    • Guohua Xu

    OriginalPaper 05 September 2017 Pages: 4282 - 4290

    

15. Thermal Shock Resistance of Si₃N₄/h-BN Composites Prepared via Catalytic Reaction-Bonding Route

    • Wanli Yang
    • Zhigang Peng
    • Zhihao Jin

    OriginalPaper 31 August 2017 Pages: 4291 - 4296

    

16. Wear Performance of A356 Matrix Composites Reinforced with Different Types of Reinforcing Particles

    • Mostafa Akbari
    • Mohammad Hasan Shojaeefard
    • Abolfazl Khalkhali

    OriginalPaper 06 September 2017 Pages: 4297 - 4310

    

17. The Effect of Friction Stir Welding on Corrosion Behavior of Ti-6Al-4V

    • Ali Reza Nasresfahani
    • Abdol Reza Soltanipur
    • Ali Ghasemi

    OriginalPaper 06 September 2017 Pages: 4311 - 4318

    

18. The Usability of Boric Acid as an Alternative Foaming Agent on the Fabrication of Al/Al₂O₃ Composite Foams

    • Bilge Yaman
    • Eren Onuklu
    • Nese O. Korpe

    OriginalPaper 05 September 2017 Pages: 4319 - 4328

    

19. Variation of Aging Precipitates and Mechanical Strength of Al-Cu-Li Alloys Caused by Small Addition of Rare Earth Elements

    • Yun-long Ma
    • Jin-feng Li

    OriginalPaper 05 September 2017 Pages: 4329 - 4339

    

20. Relationship Between pH and Electrochemical Corrosion Behavior of Thermal-Sprayed Ni-Al-Coated Q235 Steel in Simulated Soil Solutions

    • Wei Wei
    • Xin-qiang Wu
    • Bo-tao Hu

    OriginalPaper 05 September 2017 Pages: 4340 - 4348

    

21. Fabrication and Properties of Novel NiWFeB Amorphous Alloys

    • Jiajia Zhang
    • Wensheng Liu
    • Yayu Wu

    OriginalPaper 16 August 2017 Pages: 4349 - 4353

    

22. Microstructural Evolution of Semisolid 6063 Aluminum Alloy Prepared by Recrystallization and Partial Melting Process

    • Yongfei Wang
    • Shengdun Zhao
    • Chenyang Zhang

    OriginalPaper 14 August 2017 Pages: 4354 - 4363

    

23. Investigation of the Influence of Cr on the Microstructure and Properties of Ti6Al4VxCr Alloys with a Combinatorial Approach

    • D. Wu
    • L. B. Liu
    • X. Shi

    OriginalPaper 10 August 2017 Pages: 4364 - 4372

    

24. Finding an Optimal Thermo-Mechanical Processing Scheme for a Gum-Type Ti-Nb-Zr-Fe-O Alloy

    • Anna Nocivin
    • Vasile Danut Cojocaru
    • Mirela Cojocaru

    OriginalPaper 16 August 2017 Pages: 4373 - 4380

    

25. Effects of Loading Frequency and Film Thickness on the Mechanical Behavior of Nanoscale TiN Film

    • Jin-na Liu
    • Bin-shi Xu
    • Zhi-guo Xing

    OriginalPaper 18 August 2017 Pages: 4381 - 4390

    

26. Microstructural Analysis of Machined Surface Integrity in Drilling a Titanium Alloy

    • Nilesh Varote
    • Suhas S. Joshi

    OriginalPaper 21 August 2017 Pages: 4391 - 4401

    

27. Comparison Between the Inhibition Efficiencies of Two Modification Processes with PEG–Ceria Based Layers Against Corrosion of Mild Steel in Chloride and Sulfate Media

    • H. Boudellioua
    • Y. Hamlaoui
    • F. Pedraza

    OriginalPaper 23 August 2017 Pages: 4402 - 4414

    

28. The Analysis of Strontium Modification on Microstructure and Mechanical Properties of Al-25%Mg₂Si In Situ Composite

    • Dongtao Wang
    • Haitao Zhang
    • Jianzhong Cui

    OriginalPaper 31 August 2017 Pages: 4415 - 4423

    

29. Influence of Alpha Nanoalumina Reinforcement Content on the Microstructure, Mechanical and Corrosion Properties of Al6061-Al₂O₃ Composite

    • Vikas Shrivastava
    • Swati Dubey
    • I. B. Singh

    OriginalPaper 05 September 2017 Pages: 4424 - 4433

    

30. The Electrical conductivities and Tribological properties of Vacuum Hot-Pressed Cu/Reduced Graphene Oxide Composite

    • Zhengfeng Jia
    • Pipeng Zhao
    • Chaolei Ban

    OriginalPaper 01 September 2017 Pages: 4434 - 4441

    

31. Fracture Toughness of Z3CN20.09M Cast Stainless Steel with Long-Term Thermal Aging

    • Weiwei Yu
    • Dunji Yu
    • Xu Chen

    OriginalPaper 31 August 2017 Pages: 4442 - 4449

    

32. Optimization of Casting Design Parameters on Fabrication of Reliable Semi-Solid Aluminum Suspension Control Arm

    • Kh. A. Ragab
    • A. Bouaicha
    • M. Bouazara

    OriginalPaper 05 September 2017 Pages: 4450 - 4461

    

33. Effect of Ultrasonic Nanocrystal Surface Modification on Properties of Electrodeposited Ni and Ni-SiC Composite Coatings

    • Gobinda Gyawali
    • Bhupendra Joshi
    • Soo Wohn Lee

    OriginalPaper 30 August 2017 Pages: 4462 - 4469

    

34. Sintering Response of Aluminum 6061-TiB₂ Composite: Effect of Prealloyed and Premixed Matrix

    • Mahesh Paidpilli
    • Gaurav Kumar Gupta
    • Anish Upadhyaya

    OriginalPaper 05 September 2017 Pages: 4470 - 4480

    

35. Effect of Mn addition and Its Nitridation on Microstructure and Properties of Sintered Fe-1Mn-0.5C Low-Alloy Steel

    • Huizhu Chen
    • Peng Luo
    • Songlin Li

    OriginalPaper 30 August 2017 Pages: 4481 - 4490

    

36. Study on the Factors Affecting the Mechanical Behavior of Electron Beam Melted Ti6Al4V

    • Carmine Pirozzi
    • Stefania Franchitti
    • Paolo Argenio

    OriginalPaper 05 September 2017 Pages: 4491 - 4499

    

37. Deformation Twinning in Nb-Microalloyed Fe-Mn-C-Al Twinning-Induced Plasticity Steel

    • Eui Pyo Kwon
    • Dae Young Kim
    • Hyun Kyeong Park

    OriginalPaper 01 September 2017 Pages: 4500 - 4507

    

38. Fabrication and Compression Properties of Functionally Graded Copper Foam Made Using Friction Powder Sintering and Dissolution

    • Yoshihiko Hangai
    • Kousuke Zushida
    • Nobuhiro Yoshikawa

    OriginalPaper 06 September 2017 Pages: 4508 - 4513

    

39. The Mechanical Properties and Modeling of Creep Behavior of UHMWPE/Nano-HA Composites

    • Fan Li
    • Lilan Gao
    • Yun Cui

    OriginalPaper 05 September 2017 Pages: 4514 - 4521

    

40. On Mechanical Properties of Graphene Sheet Estimated Using Molecular Dynamics Simulations

    • D. K. Das
    • M. M. Ghosh

    OriginalPaper 01 September 2017 Pages: 4522 - 4532

    

41. Effect of Aging on Precipitation Behavior and Pitting Corrosion Resistance of SAF2906 Super Duplex Stainless Steel

    • Jianchun Li
    • Guoping Li
    • Hongxia Wang

    OriginalPaper 05 September 2017 Pages: 4533 - 4543

    

42. Microstructure, Growth Kinetics and Some Mechanical Properties of Boride Layers Produced on Pure Titanium by Molten-Salt Boriding

    • L. S. Ma
    • Y. H. Duan
    • P. Li

    OriginalPaper 31 August 2017 Pages: 4544 - 4555

    

43. Aging Time-Microstructure-Mechanical Property Correlation of a Ni-17Mo-7Cr-Based Superalloy Subjected to Simulated Heat-Affected Zone Thermal Treatment

    • Yanming He
    • Jianguo Yang
    • Zengliang Gao

    OriginalPaper 23 August 2017 Pages: 4556 - 4566

    

44. Studying the Effect of PWHT on Microstructural Evolution and Mechanical Properties of Welded A517 Quenched and Tempered Steel

    • Arash Rabiei
    • Reza Derakhshandeh-Haghighi

    OriginalPaper 22 August 2017 Pages: 4567 - 4577

    

45. Prediction and Optimization of Phase Transformation Region After Spot Continual Induction Hardening Process Using Response Surface Method

    • Xunpeng Qin
    • Kai Gao
    • Zhou Wang

    OriginalPaper 31 August 2017 Pages: 4578 - 4594

    

46. Effect of Ti₃SiC₂ on Tribological Properties of M50 Matrix Self-Lubricating Composites from 25 to 450 °C

    • Xiaobin Deng
    • Xiaoliang Shi
    • Yufu Wang

    OriginalPaper 05 September 2017 Pages: 4595 - 4604

    

47. Tribological Performance of Ni₃Al Matrix Self-Lubricating Composites Containing Multilayer Graphene and Ti₃SiC₂ at Elevated Temperatures

    • Zhao Yan
    • Xiaoliang Shi
    • Xiyao Liu

    OriginalPaper 05 September 2017 Pages: 4605 - 4614

    

48. Dry Sliding Wear of TiAl-Graphene-Silver Composite at Elevated Temperatures

    • Jialiang Zou
    • Xiaoliang Shi
    • Yuchun Huang

    OriginalPaper 31 August 2017 Pages: 4615 - 4625

    

49. Formability Evaluation of Aluminum Alloy 6061-T6 Sheet at Room and Elevated Temperatures

    • Zhu Chen
    • Gang Fang
    • Jia-Qing Zhao

    OriginalPaper 05 September 2017 Pages: 4626 - 4637

    

50. Comparison Between Cemented Carbide and PCD Tools on Machinability of a High Silicon Aluminum Alloy

    • R. B. Soares
    • A. M. P. de Jesus
    • A. Reis

    OriginalPaper 31 August 2017 Pages: 4638 - 4657