1. Editorial

   • Jerzy J. Sobczak
   • Rajiv Asthana

   EditorialNotes 09 August 2016 Pages: 3075 - 3075

   

2. Editorial

   • Natalia Sobczak

   EditorialNotes 04 August 2016 Pages: 3076 - 3076

   

3. Effects of Carbon Allotropic Forms on Microstructure and Thermal Properties of Cu-C Composites Produced by SPS

   • K. Pietrzak
   • N. Sobczak
   • A. Strojny-Nędza

   OriginalPaper Open access 16 February 2016 Pages: 3077 - 3083

   

4. Wear Resistance of Aluminum Matrix Composites Reinforced with Al₂O₃ Particles After Multiple Remelting

   • Adam Klasik
   • Krystyna Pietrzak
   • Andrzej Wojciechowski

   OriginalPaper Open access 04 January 2016 Pages: 3084 - 3090

   

5. Some Physicochemical Phenomena Observed During Fabrication of Mg-C Cast Composites

   • Anita Olszówka-Myalska

   OriginalPaper 05 January 2016 Pages: 3091 - 3097

   

6. Fabrication and Structure Characterization of Alumina-Aluminum Interpenetrating Phase Composites

   • Anna J. Dolata

   OriginalPaper 25 January 2016 Pages: 3098 - 3106

   

7. Al-MoSi₂ Composite Materials: Analysis of Microstructure, Sliding Wear, Solid Particle Erosion, and Aqueous Corrosion

   • V. Gousia
   • A. Tsioukis
   • A. E. Karantzalis

   OriginalPaper 11 February 2016 Pages: 3107 - 3120

   

8. Hematite Core Nanoparticles with Carbon Shell: Potential for Environmentally Friendly Production from Iron Mining Sludge

   • Dragana Stević
   • Dijana Mihajlović
   • Suzana Gotovac Atlagić

   OriginalPaper 18 February 2016 Pages: 3121 - 3127

   

9. Mechanical Properties of Carbon Fiber-Reinforced Aluminum Manufactured by High-Pressure Die Casting

   • Franziska Kachold
   • Robert Singer

   OriginalPaper 11 March 2016 Pages: 3128 - 3133

   

10. Electrodeposition and Corrosion Resistance of Ni-Graphene Composite Coatings

    • Benigna Szeptycka
    • Anna Gajewska-Midzialek
    • Tomasz Babul

    ReviewPaper Open access 23 March 2016 Pages: 3134 - 3138

    

11. The Influence of the Particle Size on the Adhesion Between Ceramic Particles and Metal Matrix in MMC Composites

    • Dariusz M. Jarzabek
    • Marcin Chmielewski
    • Agata Strojny-Nedza

    OriginalPaper Open access 10 May 2016 Pages: 3139 - 3145

    

12. Thermophysical Properties of Cu-Matrix Composites Manufactured Using Cu Powder Coated with Graphene

    • T. Babul
    • M. Baranowski
    • W. Leśniewski

    OriginalPaper Open access 17 June 2016 Pages: 3146 - 3151

    

13. Tribological Behavior of Aluminum Alloy AlSi10Mg-TiB₂ Composites Produced by Direct Metal Laser Sintering (DMLS)

    • Massimo Lorusso
    • Alberta Aversa
    • Matteo Pavese

    OriginalPaper 28 June 2016 Pages: 3152 - 3160

    

14. Fabrication of TiC-Reinforced Composites by Vacuum Arc Melting: TiC Mode of Reprecipitation in Different Molten Metals and Alloys

    • A. E. Karantzalis
    • Z. Arni
    • V. Dracopoulos

    OriginalPaper 28 June 2016 Pages: 3161 - 3172

    

15. The Influence of Al₂O₃ Powder Morphology on the Properties of Cu-Al₂O₃ Composites Designed for Functionally Graded Materials (FGM)

    • Agata Strojny-Nędza
    • Katarzyna Pietrzak
    • Witold Węglewski

    OriginalPaper Open access 11 July 2016 Pages: 3173 - 3184

    

16. Mechanical and Tribological Properties of HVOF-Sprayed (Cr₃C₂-NiCr+Ni) Composite Coating on Ductile Cast Iron

    • Marzanna Ksiazek
    • Lukasz Boron
    • Adam Tchorz

    OriginalPaper Open access 14 July 2016 Pages: 3185 - 3193

    

17. Effect of HNT on the Microstructure, Thermal and Mechanical Properties of Al/FA_CS-HNT Composites Produced by GPI

    • A. Siewiorek
    • P. Malczyk
    • M. Homa

    OriginalPaper 21 July 2016 Pages: 3194 - 3203

    

18. Investigation of Ni-B Alloys for Joining of TiB₂ Ultra-High-Temperature Ceramic

    • L. Xi
    • I. Kaban
    • J. Eckert

    OriginalPaper 19 February 2016 Pages: 3204 - 3210

    

19. Microstructure Changes and Phase Growth Occurring at the Interface of the Al/Ti Explosively Welded and Annealed Joints

    • D. M. Fronczek
    • R. Chulist
    • J. Wojewoda-Budka

    OriginalPaper Open access 04 March 2016 Pages: 3211 - 3217

    

20. The Effect of Post-grinding Heat Treatment of Alumina and Ag-Cu-Ti Braze Preform Thickness on the Microstructure and Mechanical Properties of Alumina-to-Alumina-Brazed Joints

    • Tahsin Ali Kassam
    • Hari Babu Nadendla
    • Iris Buisman

    OriginalPaper Open access 24 May 2016 Pages: 3218 - 3230

    

21. Microstructure and Properties of the Ti6Al4V/Inconel 625 Bimetal Obtained by Explosive Joining

    • Krzysztof Topolski
    • Zygmunt Szulc
    • Halina Garbacz

    OriginalPaper Open access 29 April 2016 Pages: 3231 - 3237

    

22. Stress Engineering of Multi-pass Welds of Structural Steel to Enhance Structural Integrity

    • Supriyo Ganguly
    • Jibrin Sule
    • Mustapha Y. Yakubu

    OriginalPaper Open access 26 May 2016 Pages: 3238 - 3244

    

23. Microstructural Characterization of Diffusion Bonds Assisted by Ni/Ti Nanolayers

    • Sónia Simões
    • Filomena Viana
    • Manuel F. Vieira

    OriginalPaper 25 May 2016 Pages: 3245 - 3251

    

24. Mechanical Properties of Solid-State Recycled 4xxx Aluminum Alloy Chips

    • Tomasz Tokarski

    OriginalPaper 28 June 2016 Pages: 3252 - 3259

    

25. FEM Simulation and Experimental Validation of LBW Under Conduction Regime of Ti6Al4V Alloy

    • C. Churiaque
    • M. R. Amaya-Vazquez
    • J. M. Sánchez-Amaya

    OriginalPaper 13 July 2016 Pages: 3260 - 3269

    

26. Dissolution at Interfaces in Layered Solid-Liquid Thin Films: A Key Step in Joining Process

    • F. Baras
    • V. Turlo
    • O. Politano

    OriginalPaper 08 March 2016 Pages: 3270 - 3274

    

27. Melting Point Depression and Fast Diffusion in Nanostructured Brazing Fillers Confined Between Barrier Nanolayers

    • G. Kaptay
    • J. Janczak-Rusch
    • L. P. H. Jeurgens

    OriginalPaper 25 May 2016 Pages: 3275 - 3284

    

28. Continuous Modeling of Calcium Transport Through Biological Membranes

    • J. J. Jasielec
    • R. Filipek
    • A. Lewenstam

    OriginalPaper 21 June 2016 Pages: 3285 - 3290

    

29. Determination of Diffusion Coefficients in Cement-Based Materials: An Inverse Problem for the Nernst–Planck and Poisson Models

    • Krzysztof Szyszkiewicz-Warzecha
    • Jerzy J. Jasielec
    • Robert Filipek

    OriginalPaper 22 June 2016 Pages: 3291 - 3295

    

30. Influence of Rheological and Thermal Properties of Polymers During Melt Spinning on Bicomponent Fiber Morphology

    • Esma Ayad
    • Aurélie Cayla
    • Eric Devaux

    OriginalPaper 30 June 2016 Pages: 3296 - 3302

    

31. Observation of Pseudopartial Grain Boundary Wetting in the NdFeB-Based Alloy

    • B. B. Straumal
    • A. A. Mazilkin
    • B. Baretzky

    OriginalPaper 18 March 2016 Pages: 3303 - 3309

    

32. Wettability and Reactivity of ZrB₂ Substrates with Liquid Al

    • R. Nowak
    • N. Sobczak
    • L. Jaworska

    OriginalPaper Open access 28 January 2016 Pages: 3310 - 3316

    

33. Wetting Behavior and Reactivity Between AlTi6 Alloy and Carbon Nanotubes

    • M. Homa
    • N. Sobczak
    • G. Bruzda

    OriginalPaper Open access 04 February 2016 Pages: 3317 - 3329

    

34. Critical Issues for Producing UHTC-Brazed Joints: Wetting and Reactivity

    • A. Passerone
    • M. L. Muolo
    • F. Valenza

    ReviewPaper 04 March 2016 Pages: 3330 - 3347

    

35. High-Temperature Interaction Between Molten AlSr10 Alloy and Glass-Like Carbon Substrate

    • A. Siewiorek
    • N. Sobczak
    • A. Boczkowska

    OriginalPaper Open access 17 March 2016 Pages: 3348 - 3357

    

36. Wetting and Interfacial Chemistry of Sn-Zn-Ga Alloys with Cu Substrate

    • Tomasz Gancarz
    • Przemyslaw Fima

    OriginalPaper Open access 04 April 2016 Pages: 3358 - 3365

    

37. Interfacial Reactions of Zn-Al Alloys with Na Addition on Cu Substrate During Spreading Test and After Aging Treatments

    • Tomasz Gancarz
    • Janusz Pstruś
    • Katarzyna Berent

    OriginalPaper Open access 26 April 2016 Pages: 3366 - 3374

    

38. Thermal and Microstructure Characterization of Zn-Al-Si Alloys and Chemical Reaction with Cu Substrate During Spreading

    • Katarzyna Berent
    • Janusz Pstruś
    • Tomasz Gancarz

    OriginalPaper Open access 28 April 2016 Pages: 3375 - 3383

    

39. Estimation of Intrinsic Contact Angle of Various Liquids on PTFE by Utilizing Ultrasonic Vibration

    • Takuya Urai
    • Masayoshi Kamai
    • Hidetoshi Fujii

    OriginalPaper 17 June 2016 Pages: 3384 - 3389

    

40. Interlaboratory Study for Nickel Alloy 625 Made by Laser Powder Bed Fusion to Quantify Mechanical Property Variability

    • Christopher U. Brown
    • Gregor Jacob
    • Alkan Donmez

    OriginalPaper 10 June 2016 Pages: 3390 - 3397

    

41. Production and Characterization of a Ag- and Zn-Doped Glass-Ceramic Material and In Vitro Evaluation of Its Biological Effects

    • Fatemeh Baghbani
    • Fathollah Moztarzadeh
    • Hamideh Rezvani

    OriginalPaper 14 June 2016 Pages: 3398 - 3408

    

42. Characterization of Strain-Induced Precipitation in Inconel 718 Superalloy

    • Jessica Calvo
    • Mariluz Penalva
    • José María Cabrera

    OriginalPaper 15 June 2016 Pages: 3409 - 3417

    

43. Study of the Intergranular Corrosion of Sensitized UNS S31803 Stainless Steel in Transpassive Region

    • Khashayar Morshed Behbahani
    • Pooria Najafisayar
    • Mahmoud Pakshir

    OriginalPaper 17 June 2016 Pages: 3418 - 3429

    

44. An Investigation on Axial Deformation Behavior of Thin-Wall Unfilled and Filled Tube with Aluminum Alloy (Al-Si7Mg) Foam Reinforced with SiC Particles

    • L. A. Kumaraswamidhas
    • Dipen Kumar Rajak
    • S. Das

    OriginalPaper 17 June 2016 Pages: 3430 - 3438

    

45. Study on High-Temperature Flow Behavior and Substructure and Texture Evolution of TA15 Titanium Alloy

    • Ping Li
    • Yong-gen Ding
    • Cheng-ming Li

    OriginalPaper 17 June 2016 Pages: 3439 - 3447

    

46. Effect of Coating Surface Finishing on Fatigue Behavior of C450 Steel CAPVD Coated with (Ti,Cr)N

    • E. Poursaiedi
    • A. Salarvand

    OriginalPaper 13 June 2016 Pages: 3448 - 3455

    

47. Corrosion and Discharge Behaviors of Al-Mg-Sn-Ga-In in Different Solutions

    • Hanqing Xiong
    • Xiang Yin
    • Kun Yu

    OriginalPaper 14 June 2016 Pages: 3456 - 3464

    

48. Prediction of Forming Limit Curves from Hardness for Steels

    • Erik J. Pavlina
    • Chester J. Van Tyne

    OriginalPaper 17 June 2016 Pages: 3465 - 3471

    

49. Effects of Ti and B Addition on Microstructures and Mechanical Properties of Hot-Rolled High-Strength Nb-Containing Steels

    • Xianna Meng
    • Cong Li
    • Wanglin Chen

    OriginalPaper 20 June 2016 Pages: 3472 - 3481

    

50. Influence of Impact-Oscillatory Loading upon the Mechanical Properties of the VT-22 Titanium Alloy Sheet

    • M. G. Chausov
    • A. P. Pylypenko
    • V. B. Hutsaylyuk

    OriginalPaper 24 June 2016 Pages: 3482 - 3492