1. Mechanical Properties and Microstructure of TIG and FSW Joints of a New Al-Mg-Mn-Sc-Zr Alloy

   • Guofu Xu
   • Jian Qian
   • Zhimin Yin

   OriginalPaper 18 February 2016 Pages: 1249 - 1256

   

2. Simulations and Experiments of Hot Forging Design and Evaluation of the Aircraft Landing Gear Barrel Al Alloy Structure

   • T. Ram Prabhu

   OriginalPaper 19 February 2016 Pages: 1257 - 1268

   

3. Hot Deformation Processing Map and Microstructural Evaluation of the Ni-Based Superalloy IN-738LC

   • S. A. Sajjadi
   • A. Chaichi
   • M. A. Kalaie

   OriginalPaper 22 February 2016 Pages: 1269 - 1275

   

4. Processing and Performance of MOF (Metal Organic Framework)-Loaded PAN Nanofibrous Membrane for CO₂ Adsorption

   • Wahiduzzaman
   • Mujibur R. Khan
   • Quazi Nahida Sultana

   OriginalPaper 22 February 2016 Pages: 1276 - 1283

   

5. Fatigue Life Prediction Based on Local Strain Energy for Healed Copper Film by Laser Irradiation

   • Feng-Zhu Liu
   • De-Guang Shang
   • Yu-Juan Sun

   OriginalPaper 23 February 2016 Pages: 1284 - 1290

   

6. Increasing Weldability of Service-Aged Reformer Tubes by Partial Solution Annealing

   • M. Mostafaei
   • M. Shamanian
   • M. Amini

   OriginalPaper 29 February 2016 Pages: 1291 - 1303

   

7. Formation of Microcracks During Micro-Arc Oxidation in a Phytic Acid-Containing Solution on Two-Phase AZ91HP

   • R. F. Zhang
   • W. H. Chang
   • J. H. Xiang

   OriginalPaper 29 February 2016 Pages: 1304 - 1316

   

8. Study on Fabrication of AA4032/AA6069 Cladding Billet Using Direct Chill Casting Process

   • Xing Han
   • Haitao Zhang
   • Jianzhong Cui

   OriginalPaper 04 March 2016 Pages: 1317 - 1326

   

9. Microstructure and Mechanical Properties of Plasma Arc Brazed AISI 304L Stainless Steel and Galvanized Steel Plates

   • Yajuan Jin
   • Ruifeng Li
   • Yu Wang

   OriginalPaper 03 March 2016 Pages: 1327 - 1335

   

10. Microstructure and Precipitate's Characterization of the Cu-Ni-Si-P Alloy

    • Yi Zhang
    • Baohong Tian
    • Yong Liu

    OriginalPaper 03 March 2016 Pages: 1336 - 1341

    

11. Controllable Low-Temperature Hydrothermal Synthesis and Gas-Sensing Investigation of Crystalline SnO₂ Nanoparticles

    • Ping Lu
    • Xiulan Hu
    • Xiaodong Shen

    OriginalPaper 10 March 2016 Pages: 1342 - 1346

    

12. Flow Behavior and Constitutive Equation of Ti-6.5Al-2Sn-4Zr-4Mo-1W-0.2Si Titanium Alloy

    • Xuemei Yang
    • Hongzhen Guo
    • Shichong Yuan

    OriginalPaper 22 February 2016 Pages: 1347 - 1359

    

13. Parametric Modeling of Welding Processes Using Numerical-Analytical Basis Functions and Equivalent Source Distributions

    • S. G. Lambrakos

    OriginalPaper 23 February 2016 Pages: 1360 - 1375

    

14. Physical Simulation of Hot Deformation and Microstructural Evolution of Fe-0.05C-0.13P Steel

    • Yashwant Mehta
    • S. K. Rajput
    • G. P. Chaudhari

    OriginalPaper 10 March 2016 Pages: 1376 - 1383

    

15. Influence of Temperature and Time of Post-weld Heat Treatment on Stress Relief in an 800-mm-Thick Steel Weldment

    • Abhishek Mitra
    • N. Siva Prasad
    • G. D. Janaki Ram

    OriginalPaper 10 March 2016 Pages: 1384 - 1393

    

16. Arrhenius-Type Constitutive Model for High Temperature Flow Stress in a Nickel-Based Corrosion-Resistant Alloy

    • L. Wang
    • F. Liu
    • C. F. Chen

    OriginalPaper 14 March 2016 Pages: 1394 - 1406

    

17. Friction and Wear Behavior of 30CrMnSiA Steel at Elevated Temperatures

    • Sheng-guan Qu
    • Fu-qiang Lai
    • Hui Guo

    OriginalPaper 22 February 2016 Pages: 1407 - 1415

    

18. Optimization of a Three-Component Green Corrosion Inhibitor Mixture for Using in Cooling Water by Experimental Design

    • E. Asghari
    • H. Ashassi-Sorkhabi
    • R. Bagheri

    OriginalPaper 02 March 2016 Pages: 1416 - 1425

    

19. Degradation of SPS-Fabricated YSZ and Nd₂O₃-YSZ Ceramics in Supercritical Water

    • A. Siebert-Timmer
    • L. Bichler

    OriginalPaper 03 March 2016 Pages: 1426 - 1435

    

20. Effect of Compaction Load and Sintering Temperature on Tribological and Mechanical Behavior of Ni/SiC/MoS₂ Composites

    • T Ram Prabhu

    OriginalPaper 14 March 2016 Pages: 1436 - 1445

    

21. Microtribological Mechanisms of Tungsten and Aluminum Nitride Films

    • Hongjian Zhao
    • Chunyan Mu
    • Fuxing Ye

    ReviewPaper 16 March 2016 Pages: 1446 - 1452

    

22. Process Integrated Heat Treatment of a Microalloyed Medium Carbon Steel: Microstructure and Mechanical Properties

    • Sebastian Herbst
    • Mareike Schledorn
    • Florian Nürnberger

    OriginalPaper 16 March 2016 Pages: 1453 - 1462

    

23. Interrelation of Steel Composition, Hardening Route, and Tempering Response of Medium Carbon Low-Alloy Steels

    • Abdel-Hamid A. Hussein
    • Mahmoud T. Abdu
    • Mahmoud M. Tash

    OriginalPaper 19 February 2016 Pages: 1463 - 1473

    

24. Wetting Behavior and Heat Transfer of Aqueous Graphene Nanofluids

    • Vignesh U. Nayak
    • Narayan K. Prabhu

    OriginalPaper 22 February 2016 Pages: 1474 - 1480

    

25. Experimental and Numerical Simulations of Phase Transformations Occurring During Continuous Annealing of DP Steel Strips

    • Andrzej Wrożyna
    • Monika Pernach
    • Maciej Pietrzyk

    OriginalPaper Open access 25 February 2016 Pages: 1481 - 1491

    

26. Study on Variants of Solution Treatment and Aging Cycle of Titanium Alloy Ti6Al4V

    • R. K. Gupta
    • V. Anil Kumar
    • Sumit Chhangani

    OriginalPaper 10 March 2016 Pages: 1492 - 1501

    

27. Mechanical Properties, Surface Structure, and Morphology of Carbon Fibers Pre-heated for Liquid Aluminum Infiltration

    • Franziska S. Kachold
    • Rafal Kozera
    • Anna Boczkowska

    OriginalPaper Open access 15 March 2016 Pages: 1502 - 1507

    

28. In-Vitro Biocompatibility Studies of Plasma-Nitrided Titanium Alloy β-21S Using Fibroblast Cells

    • L. Mohan
    • M. D. Raja
    • C. Anandan

    OriginalPaper 17 February 2016 Pages: 1508 - 1514

    

29. NiFe₂O₄ Spinel Protection Coating for High-Temperature Solid Oxide Fuel Cell Interconnect Application

    • Reza Irankhah
    • Babak Raissi
    • Sasan Ghashghai

    OriginalPaper 18 February 2016 Pages: 1515 - 1525

    

30. Mechanical and Metallurgical Evolution of Stainless Steel 321 in a Multi-step Forming Process

    • M. Anderson
    • F. Bridier
    • J. Savoie

    OriginalPaper 05 February 2016 Pages: 1526 - 1538

    

31. Development of Custom 465^® Corrosion-Resisting Steel for Landing Gear Applications

    • Benjamin T. Daymond
    • Nicolas Binot
    • Alan Shepherd

    OriginalPaper 29 February 2016 Pages: 1539 - 1553

    

32. High-Temperature Deformation Characteristics of a β-Type Ti-29Nb-13Ta-4.6Zr Alloy

    • E. Ghanbari
    • A. Zarei-Hanzaki
    • Sh. Khoddam

    OriginalPaper 25 February 2016 Pages: 1554 - 1561

    

33. Precipitation Effects on the Martensitic Transformation in a Cu-Al-Ni Shape Memory Alloy

    • Marius-Gabriel Suru
    • Nicoleta-Monica Lohan
    • Leandru-Gheorghe Bujoreanu

    OriginalPaper 29 February 2016 Pages: 1562 - 1569

    

34. Influence of Hydrogen Content on Optical and Mechanical Performances of Diamond-Like Carbon Films on Glass Substrate

    • Yao Sun
    • Xing-Ye Huang
    • Hong Wang

    OriginalPaper 02 March 2016 Pages: 1570 - 1577

    

35. AC Impedance Behavior of LaNi_3.55Mn_0.4Al_0.3Co_0.6Fe_0.15 Hydrogen-Storage Alloy: Effect of Surface Area

    • M. Tliha
    • C. Khaldi
    • J. Lamloumi

    OriginalPaper 02 March 2016 Pages: 1578 - 1585

    

36. Production and Precipitation Hardening of Beta-Type Ti-35Nb-10Cu Alloy Foam for Implant Applications

    • Ilven Mutlu
    • Sinem Yeniyol
    • Enver Oktay

    OriginalPaper 04 March 2016 Pages: 1586 - 1593

    

37. The Effect of Silane on the Microstructure, Corrosion, and Abrasion Resistances of the Anodic Films on Ti Alloy

    • Jinwei Wang
    • Jiali Chen

    OriginalPaper 04 March 2016 Pages: 1594 - 1602

    

38. Effect of Intercritical Annealing on Microstructural Evolution and Properties of Quenched & Partitioned (Q&P) Steels

    • Riming Wu
    • Xuejun Jin
    • Li Wang

    OriginalPaper 07 March 2016 Pages: 1603 - 1610

    

39. High-Resolution EBSD Study of Adiabatic Shear Band and Neighboring Grains After Dynamic Impact Loading of Mn-Steel Used in Vehicle Structure

    • M. Eskandari
    • M. A. Mohtadi-Bonab
    • J. A. Szpunar

    OriginalPaper 01 February 2016 Pages: 1611 - 1620

    

40. Constitutive Modeling of High-Temperature Flow Behavior of Al-0.62Mg-0.73Si Aluminum Alloy

    • Y. Sun
    • W. H. Ye
    • L. X. Hu

    OriginalPaper 09 March 2016 Pages: 1621 - 1630

    

41. Crack Initiation from Corrosion Pit in Three Aluminum Alloys Under Ambient and Saltwater Environments

    • V. Sabelkin
    • H. E. Misak
    • S. Mall

    OriginalPaper 10 March 2016 Pages: 1631 - 1642

    

42. Evolution of Nanostructure in Al 1050 Sheet Deformed by Cryo-cross-rolling

    • Mohammad Jafari Eskandari
    • Mohsen Asadi Asadabad
    • Ali Shafyei

    OriginalPaper 14 March 2016 Pages: 1643 - 1649

    

43. Low-Cycle Fatigue Properties of P92 Ferritic-Martensitic Steel at Elevated Temperature

    • Zhen Zhang
    • ZhengFei Hu
    • KangLe Fan

    OriginalPaper 14 March 2016 Pages: 1650 - 1662

    

44. Effect of Alloy 625 Buffer Layer on Hardfacing of Modified 9Cr-1Mo Steel Using Nickel Base Hardfacing Alloy

    • Gopa Chakraborty
    • C. R. Das
    • Arup Dasgupta

    OriginalPaper 16 March 2016 Pages: 1663 - 1672

    

45. Effect of Rotational Speed on Microstructure and Mechanical Properties of Refill Friction Stir Spot Welded 2024 Al Alloy

    • Zhengwei Li
    • Shuangsheng Gao
    • Peng Chai

    OriginalPaper 16 March 2016 Pages: 1673 - 1682

    

46. Effect of Film Formation Potential on Passive Behavior of Ultra-Fine-Grained 1050 Al Alloy Fabricated via ARB Process

    • A. Fattah-alhosseini
    • S. O. Gashti
    • M. K. Keshavarz

    OriginalPaper 16 March 2016 Pages: 1683 - 1689