Journal of Materials Engineering and Performance - ASM Featured Articles
Journal of Failure Analysis and Prevention
- “Analysis of Stop Valve Leaks: Environmental Stress Cracking of Styrene Copolymer Valve Stems” (this opens in a new tab)
- “Fatigue Failure of a Drive Shaft” (this opens in a new tab)
- “Fragment Distribution as an Aid to Forensic Failure Investigations at the Scene of Explosions” (this opens in a new tab)
Journal of Materials Engineering and Performance
- “Microstructures, Mechanical Properties and Thixoformability of TiB2/Al Composite Prepared by Ultrasonic-Assisted Squeeze Casting” (this opens in a new tab)
- “Unusual Rolling Texture in Ferritic/Martensitic Steel” (this opens in a new tab)
- “Effect of Anisotropy on the Manufacturing Process of Mg-Zn-Zr Alloy Connecting Rod” (this opens in a new tab)
Journal of Phase Equilibria and Diffusion
- “Phase Transformations During Homogenization of Inconel 718 Alloy Fabricated by Suction Casting and Laser Powder Bed Fusion: A CALPHAD Case Study Evaluating Different Homogenization Models” (this opens in a new tab)
- “Experimental Liquidus Studies of the Pb-Fe-Si-O System in Air” (this opens in a new tab)
- “Interdiffusion Coefficients in FCC Co-Rich Co-Ti-V Alloys at 1273, 1373 and 1473 K” (this opens in a new tab)
Journal of Thermal Spray Technology
- “Life Cycle Assessment of a Thermal Sprayed Al2O3-NiCr Resistive Heating Coating for Pipe Freeze Protection” (this opens in a new tab)
- “Mechanical Behavior of Annealed Cold Sprayed Cu-Ni Coatings” (this opens in a new tab)
- “Sintering Characteristics of Thermal Barrier YSZ Coatings Made by Suspension Plasma Spraying” (this opens in a new tab)
Metallography, Microstructure, and Analysis
- “Voronoi Diagram-Based Microstructure Modeling and Micromechanical Analysis of Quenched C35 Steel” (this opens in a new tab)
- “Development of an Oxidation Contrast Method for Pearlite Colony Revelation in Eutectoid Steels” (this opens in a new tab)
- “Effect of Strain Rate on Mechanical Behavior and Microstructure Evolution of Ti-Based T110 Alloy” (this opens in a new tab)
Shape Memory and Superelasticity
- “Recent Advancements in Rotary Shape Memory Alloy Actuators for Aeronautics” (this opens in a new tab)
- “FeMnNiAl Iron-Based Shape Memory Alloy: Promises and Challenges” (this opens in a new tab)
- “Processing and Characterization of Liquid-Phase Sintered NiTi Woven Structures” (this opens in a new tab)