Articles

1. Corrosion Fatigue Properties of Hot Continuous Rolling Ti-Al-Nb-Zr-Mo Alloy Seamless Tube by Electron Beam Welding in 3.5% NaCl Solution

   • Xiaofeng Zhou
   • Xueyan Lv
   • Fangjie Cheng

   Original Research Article 30 April 2024

   

2. Mechanical Response and Plastic Deformation in the B2-NiAl/Fe Interface: Molecular Dynamics Analysis

   • Junqiang Ren
   • Xinyue Zhang
   • Xuefeng Lu

   Original Research Article 30 April 2024

   

3. Tribological Properties of Surface Alloyed AISI 1045 Steel with Titanium in a Nitrogen Containing Atmosphere

   • Payam Hejazian
   • Mahmoud Heydarzadeh Sohi
   • Nazanin Jalalian Karazmoudeh

   Original Research Article 30 April 2024

   

4. Investigating Formability Behavior of Friction Stir-Welded High-Strength Shipbuilding Steel using Experimental, Finite Element, and Artificial Neural Network Methods

   • Dursun Murat Sekban
   • Ecren Uzun Yaylacı
   • Abdelouahed Tounsi

   Original Research Article 30 April 2024

   

5. Mechanical and Electrochemical Properties Comparison of Additively Manufactured Ti-6Al-4V Alloys by Electron Beam Melting and Selective Laser Melting

   • Liliana Romero Reséndiz
   • Tonantzin Sánchez Cano
   • Metin U. Salamci

   Original Research Article Open access 30 April 2024

   

6. Laser Transmission Welding of Polypropylene: Insights into Parameter Interplay, Thermal Analysis, Bonding Quality, Fracture Characteristics, and Weld Morphology

   • Ghulam Anwer
   • Bappa Acherjee

   Original Research Article 30 April 2024

   

7. Numerical Optimization and Performance Study of Ni-Based Coatings on Gray Cast Iron Surface by High-Speed Laser Cladding Based on Orthogonal Test

   • Huan Li
   • Muhua Mao
   • Qiaofeng Bai

   Original Research Article 30 April 2024

   

8. Dislocation-Based Finite Element Modeling of an Off-Axis Twist Extrusion with Variable Helix Angles

   • Moeen Barkhordari
   • Majid Seyed-Salehi

   Original Research Article 30 April 2024

   

9. Properties of a Five-Element Oxide Ceramic (ZrYTaAB)O Prepared by Mechanical Milling and Sintering

   • Yuhui Chen
   • Lu Wang
   • Jun Song

   Original Research Article 29 April 2024

   

10. Study on the Microstructure and Mechanical Properties on Al/Carbon Fiber Reinforced Thermoplastic Dissimilar Friction Stir Lap Welding Joints

    • Zhang Yuan
    • Yibo Sun
    • Xinhua Yang

    Original Research Article 29 April 2024

    

11. Strain Cyclic Characteristics and Ratchetting Behaviors of High-Speed Railway Train Axle Steel EA4T

    • Wenjie Zhao
    • Xuehong Ren
    • Guilin Wen

    Original Research Article 29 April 2024

    

12. Microstructural and Mechanical Characterization of Selective Laser Melted 17-4 PH Stainless Steel: Effect of Laser Scan Strategy and Heat Treatment

    • Sreekanth Asapu
    • Ravi Kumar Y
    • Shikhar Krishn Jha

    Original Research Article 29 April 2024

    

13. Transformation-Induced Plasticity in 304 and 304L Stainless Steels and Its Effect on Tensile Behavior and Anisotropy

    • Borna Rafiei
    • Bagher Mohammad Sadeghi
    • Farhad Rahimi

    Original Research Article 29 April 2024

    

14. Development of Fully Pearlitic Microstructure in a Hypoeutectoid Steel

    • Sonu Yadav
    • Arunansu Haldar
    • Sourav Das

    Original Research Article 26 April 2024

    

15. A Physics-Informed Machine Learning Model of Dissimilar Friction Stir Welding to Tailor Residual Stress Using Coupled Eulerian and Lagrangian Approach

    • Debtanay Das
    • Swarup Bag
    • Sukhomay Pal

    Original Research Article 26 April 2024

    

16. X-ray Microscopic and Thermodynamic Model Assessments of Softening in TIG-Welded AA 6061-T651

    • Muhammad Zia ud din Urf Umer
    • Ahmed A. Tiamiyu

    Original Research Article 26 April 2024

    

17. Synthesis and Characterization of Mg-Al-Zn Alloy-Based Bimodal Hybrid Composites with SiC and TiO₂

    • Rahul Sharma
    • Jayashree Baral

    Original Research Article 26 April 2024

    

18. Investigation of Microstructure, Mechanical, and Wear Behavior of Lanthanum Zirconate, Yttrium Zirconate, and Lanthanum Yttrium Zirconate

    • M. J. Moaveni
    • H. Omidvar
    • S. M. H. Mirbagheri

    Original Research Article 26 April 2024

    

19. Design of Non-Heat Treatable High Pressure Die Casting Al Alloys: A Review

    • Hongyi Zhu
    • Cunjuan Xia
    • Haowei Wang

    Review 26 April 2024

    

20. Additive Manufacturing of Zirconia-Based Pastes for Dental Prosthesis Via Robocasting Method

    • Konstantinos Dimitriadis
    • Diana Baciu
    • Constantina-Dia Andreouli

    Original Research Article 26 April 2024

    

21. Hydraulic Bulging and Failure Analyses of Wire Arc Additive Manufactured Steel Tubes

    • Bhupesh Singh Katiyar
    • Dibya Ranjan Behera
    • Sushanta Kumar Panda

    Original Research Article 25 April 2024

    

22. Effect of Chemical Vapor Deposition Pressure on Preferred Orientation, Microstructure, and Oxidation Resistance of Pyrolytic Graphite

    • E. Vetrivendan
    • Rongali Hareesh
    • S. Ningshen

    Original Research Article 25 April 2024

    

23. Experimental Investigation of the Effect of Core Structures on Low-Velocity Impact Response of PEEK Sandwich Panels Manufactured by FDM

    • Zhou Wen
    • Ming Li
    • Meigui Xue

    Original Research Article 24 April 2024

    

24. Effect of Mg on the Corrosion Resistance of Hot-Dip Zn-Cu-Ti Alloy

    • Yu Lei
    • Shiwei Li
    • Shaohua Yin

    Original Research Article 24 April 2024

    

25. Development of a Novel β-Type Zr-25Ta-5Ti Alloy

    • Edriely de Oliveira Saraiva
    • Gerson Santos de Almeida
    • Carlos Roberto Grandini

    Original Research Article 24 April 2024

    

26. Experimental Investigation on Fabrication of Cermet Hollow Spheres for Use as Reinforcement in the Production of Lightweight and Strong Metal Foams for High Energy Absorption Applications

    • Fisseha Zewdie
    • Dhruv Narayan
    • Naresh Bhatnagar

    Original Research Article 24 April 2024

    

27. Critical Heat Transfer Coefficients for Selection of Quench Media during Heat Treatment of Steels

    • Augustine Samuel
    • K. M. Pranesh Rao
    • K. Narayan Prabhu

    Original Research Article 23 April 2024

    

28. Fabrication and Ballistic Performance Evaluation of B₄C/AA7075 Functionally Graded Materials for Armor Applications

    • Mayank Chouhan
    • Lalit Thakur
    • Sanjeev Kumar Verma

    Original Research Article 23 April 2024

    

29. Effect of Laser Surface Polishing on the Surface Characteristics, Tribological, and Mechanical Behavior of 3D-Printed Acrylonitrile Styrene Acrylate Parts

    • A. Captan Prabakaran
    • P. Senthil
    • T. Sathies

    Original Research Article 22 April 2024

    

30. Simultaneous Enhancement of Thermal Conductivity and Mechanical Properties of EZ42 Magnesium Alloy by Ca Microalloying

    • Yong Zhang
    • Xiaogang Wang
    • Tao Liu

    Original Research Article 22 April 2024

    

31. In Situ Analysis of Stress and Microstructure Evolution during Welding of High-Alloy Steels Using Energy-Dispersive X-Ray Diffraction

    • Nico Hempel
    • Thomas Nitschke-Pagel
    • Klaus Dilger

    Original Research Article Open access 22 April 2024

    

32. Sustainability of Existing Phase of Extruded Fiber-Reinforced Polylactic Acid under Dynamic Shock Loading Conditions

    • G. Sakthi Balan
    • S. Aravind Raj

    Original Research Article 22 April 2024

    

33. Reconstruction of Numerical Models for Mechanical Performance of Artificially Rusted Steel Subjected to High Temperatures

    • Zhen Guo
    • Jingjing Zhou
    • Fengjie Zhang

    Original Research Article 22 April 2024

    

34. Influence of MoS₂-Based Nanofluid Minimum Quantity Lubrication on Machining Performance of AISI 316L Stainless Steel

    • Anandita Singh
    • Aruna Thakur
    • Soumya Gangopadhyay

    Original Research Article 22 April 2024

    

35. Study of Design and Microstructure Properties of Laser Clad Multiphase Coupled Nickel-Based Self-Lubricating Coatings

    • Dusheng Sun
    • Yong Yang
    • Mingyu Yuan

    Original Research Article 22 April 2024

    

36. Residual Stress Distribution in Sapphire/Ti6Al4V Alloy Joints Brazed with CuTi+B Composite Fillers

    • H. S. Yuan
    • H. Li
    • M. Q. Li

    Original Research Article 19 April 2024

    

37. Selected Articles from the 29th and 31st Heat Treating Society Conferences

    • Robert Cryderman
    • John Tartaglia
    • Collin Russell

    Guest Editorial 18 April 2024 Pages: 4179 - 4180

38. Effects of V Element and Heat Treatment Process on Microstructure and Mechanical Properties of Additive Manufacturing of Titanium Aluminum Alloy Using Flux-Core Arc Welding Wire with TiH₂ Powder

    • Yuzhao Lv
    • Ting Wang
    • Zhichao Chen

    Original Research Article 18 April 2024

    

39. Effect of Rare Earth Lanthanum Addition on Microstructure and Properties of Pure Titanium

    • Yuanyuan Zhu
    • Yechen Deng
    • Bingfeng Wang

    Original Research Article 18 April 2024

    

40. Effect of Surface Nano Structuring on Corrosion and Tribocorrosion Behavior of Ti6Al4V Alloy in Simulated Body Fluid

    • Kumar Subham
    • Ankur Kumar
    • G. P. Chaudhari

    Original Research Article 18 April 2024

    

41. Synergistic Effect of Sc and Excess Mg on the Microstructure and Mechanical Properties of Hypoeutectic Al-10Mg₂Si Alloy

    • Xiaofeng Wu
    • Fufa Wu
    • Rongda Zhao

    Original Research Article 18 April 2024

    

42. Mechanical Properties of Recycled Carbon Fiber-Reinforced Resin Composites 3D Printed via Digital Light Processing

    • Frederico de Castro Magalhães
    • Juan Carlos Campos Rubio

    Original Research Article 17 April 2024

    

43. Effects of Trace La on the Aging Properties of the Cu-Ti-Zr Alloys

    • Nengneng Wang
    • Meng Zhou
    • Alex A. Volinsky

    Original Research Article 17 April 2024

    

44. Influence of Heat Process on Microstructure and Mechanical Properties of DD5 Single Crystal Superalloy During Manufacturing

    • Shujuan Ma
    • Lei Cao
    • Xin Zhuang

    Original Research Article 16 April 2024

    

45. Surface Strengthening of Aerospace Material of Inconel 718 by GOV (Flow Peening) Process

    • Mehmet Hanifi Doğru
    • Murat Kalak
    • Kursad Gov

    Original Research Article 16 April 2024

    

46. Oxidation Behavior of Ni-Based Oxide Dispersion-Strengthened Alloy Fabricated by Direct Energy Deposition at 1100 °C

    • Changyu Ma
    • Bruce S. Kang

    Original Research Article 16 April 2024

    

47. Comparative Analysis of Microstructure Evolution and Mechanical Properties of Dissimilar Welded Joints of AA7075/AA6061 via Friction Stir Welding, Tungsten Inert Gas Welding, and Tungsten Inert Gas + Friction Stir Processing

    • Rajeev Rana
    • D. B. Karunakar
    • Thomas Mathew

    Original Research Article 16 April 2024

    

48. The Role of Microstructure in the Gradient of Tensile Properties through Thickness in 7449 Aluminium Alloy Thick Plate

    • J. A. Heredero
    • J. Medina
    • P. Adeva

    Original Research Article Open access 15 April 2024

    

49. Preparation of Bronze (CuSn10) Parts by Material Extrusion Process Using Paraffin-Based Binder

    • Kai Jin
    • Gemin Li
    • Jigui Cheng

    Original Research Article 15 April 2024

    

50. Experimental Investigation on Microstructure and Mechanical Properties of 15CDV6 High Strength Low Alloy Steel Welded Using Spin Arc Gas Metal Arc Welding Process

    • G. Rajesh Kannan
    • P. Sathiya
    • M. Umar

    Original Research Article 15 April 2024