Articles

1. Development of Fully Pearlitic Microstructure in a Hypoeutectoid Steel

   • Sonu Yadav
   • Arunansu Haldar
   • Sourav Das

   Original Research Article 26 April 2024

   

2. A Physics-Informed Machine Learning Model of Dissimilar Friction Stir Welding to Tailor Residual Stress Using Coupled Eulerian and Lagrangian Approach

   • Debtanay Das
   • Swarup Bag
   • Sukhomay Pal

   Original Research Article 26 April 2024

   

3. X-ray Microscopic and Thermodynamic Model Assessments of Softening in TIG-Welded AA 6061-T651

   • Muhammad Zia ud din Urf Umer
   • Ahmed A. Tiamiyu

   Original Research Article 26 April 2024

   

4. Synthesis and Characterization of Mg-Al-Zn Alloy-Based Bimodal Hybrid Composites with SiC and TiO₂

   • Rahul Sharma
   • Jayashree Baral

   Original Research Article 26 April 2024

   

5. Investigation of Microstructure, Mechanical, and Wear Behavior of Lanthanum Zirconate, Yttrium Zirconate, and Lanthanum Yttrium Zirconate

   • M. J. Moaveni
   • H. Omidvar
   • S. M. H. Mirbagheri

   Original Research Article 26 April 2024

   

6. Design of Non-Heat Treatable High Pressure Die Casting Al Alloys: A Review

   • Hongyi Zhu
   • Cunjuan Xia
   • Haowei Wang

   Review 26 April 2024

   

7. Additive Manufacturing of Zirconia-Based Pastes for Dental Prosthesis Via Robocasting Method

   • Konstantinos Dimitriadis
   • Diana Baciu
   • Constantina-Dia Andreouli

   Original Research Article 26 April 2024

   

8. Hydraulic Bulging and Failure Analyses of Wire Arc Additive Manufactured Steel Tubes

   • Bhupesh Singh Katiyar
   • Dibya Ranjan Behera
   • Sushanta Kumar Panda

   Original Research Article 25 April 2024

   

9. Effect of Chemical Vapor Deposition Pressure on Preferred Orientation, Microstructure, and Oxidation Resistance of Pyrolytic Graphite

   • E. Vetrivendan
   • Rongali Hareesh
   • S. Ningshen

   Original Research Article 25 April 2024

   

10. Experimental Investigation of the Effect of Core Structures on Low-Velocity Impact Response of PEEK Sandwich Panels Manufactured by FDM

    • Zhou Wen
    • Ming Li
    • Meigui Xue

    Original Research Article 24 April 2024

    

11. Effect of Mg on the Corrosion Resistance of Hot-Dip Zn-Cu-Ti Alloy

    • Yu Lei
    • Shiwei Li
    • Shaohua Yin

    Original Research Article 24 April 2024

    

12. Development of a Novel β-Type Zr-25Ta-5Ti Alloy

    • Edriely de Oliveira Saraiva
    • Gerson Santos de Almeida
    • Carlos Roberto Grandini

    Original Research Article 24 April 2024

    

13. Experimental Investigation on Fabrication of Cermet Hollow Spheres for Use as Reinforcement in the Production of Lightweight and Strong Metal Foams for High Energy Absorption Applications

    • Fisseha Zewdie
    • Dhruv Narayan
    • Naresh Bhatnagar

    Original Research Article 24 April 2024

    

14. Critical Heat Transfer Coefficients for Selection of Quench Media during Heat Treatment of Steels

    • Augustine Samuel
    • K. M. Pranesh Rao
    • K. Narayan Prabhu

    Original Research Article 23 April 2024

    

15. Fabrication and Ballistic Performance Evaluation of B₄C/AA7075 Functionally Graded Materials for Armor Applications

    • Mayank Chouhan
    • Lalit Thakur
    • Sanjeev Kumar Verma

    Original Research Article 23 April 2024

    

16. Effect of Laser Surface Polishing on the Surface Characteristics, Tribological, and Mechanical Behavior of 3D-Printed Acrylonitrile Styrene Acrylate Parts

    • A. Captan Prabakaran
    • P. Senthil
    • T. Sathies

    Original Research Article 22 April 2024

    

17. Simultaneous Enhancement of Thermal Conductivity and Mechanical Properties of EZ42 Magnesium Alloy by Ca Microalloying

    • Yong Zhang
    • Xiaogang Wang
    • Tao Liu

    Original Research Article 22 April 2024

    

18. In Situ Analysis of Stress and Microstructure Evolution during Welding of High-Alloy Steels Using Energy-Dispersive X-Ray Diffraction

    • Nico Hempel
    • Thomas Nitschke-Pagel
    • Klaus Dilger

    Original Research Article Open access 22 April 2024

    

19. Sustainability of Existing Phase of Extruded Fiber-Reinforced Polylactic Acid under Dynamic Shock Loading Conditions

    • G. Sakthi Balan
    • S. Aravind Raj

    Original Research Article 22 April 2024

    

20. Reconstruction of Numerical Models for Mechanical Performance of Artificially Rusted Steel Subjected to High Temperatures

    • Zhen Guo
    • Jingjing Zhou
    • Fengjie Zhang

    Original Research Article 22 April 2024

    

21. Influence of MoS₂-Based Nanofluid Minimum Quantity Lubrication on Machining Performance of AISI 316L Stainless Steel

    • Anandita Singh
    • Aruna Thakur
    • Soumya Gangopadhyay

    Original Research Article 22 April 2024

    

22. Study of Design and Microstructure Properties of Laser Clad Multiphase Coupled Nickel-Based Self-Lubricating Coatings

    • Dusheng Sun
    • Yong Yang
    • Mingyu Yuan

    Original Research Article 22 April 2024

    

23. Residual Stress Distribution in Sapphire/Ti6Al4V Alloy Joints Brazed with CuTi+B Composite Fillers

    • H. S. Yuan
    • H. Li
    • M. Q. Li

    Original Research Article 19 April 2024

    

24. Selected Articles from the 29th and 31st Heat Treating Society Conferences

    • Robert Cryderman
    • John Tartaglia
    • Collin Russell

    Guest Editorial 18 April 2024

25. Effects of V Element and Heat Treatment Process on Microstructure and Mechanical Properties of Additive Manufacturing of Titanium Aluminum Alloy Using Flux-Core Arc Welding Wire with TiH₂ Powder

    • Yuzhao Lv
    • Ting Wang
    • Zhichao Chen

    Original Research Article 18 April 2024

    

26. Effect of Rare Earth Lanthanum Addition on Microstructure and Properties of Pure Titanium

    • Yuanyuan Zhu
    • Yechen Deng
    • Bingfeng Wang

    Original Research Article 18 April 2024

    

27. Effect of Surface Nano Structuring on Corrosion and Tribocorrosion Behavior of Ti6Al4V Alloy in Simulated Body Fluid

    • Kumar Subham
    • Ankur Kumar
    • G. P. Chaudhari

    Original Research Article 18 April 2024

    

28. Synergistic Effect of Sc and Excess Mg on the Microstructure and Mechanical Properties of Hypoeutectic Al-10Mg₂Si Alloy

    • Xiaofeng Wu
    • Fufa Wu
    • Rongda Zhao

    Original Research Article 18 April 2024

    

29. Mechanical Properties of Recycled Carbon Fiber-Reinforced Resin Composites 3D Printed via Digital Light Processing

    • Frederico de Castro Magalhães
    • Juan Carlos Campos Rubio

    Original Research Article 17 April 2024

    

30. Effects of Trace La on the Aging Properties of the Cu-Ti-Zr Alloys

    • Nengneng Wang
    • Meng Zhou
    • Alex A. Volinsky

    Original Research Article 17 April 2024

    

31. Influence of Heat Process on Microstructure and Mechanical Properties of DD5 Single Crystal Superalloy During Manufacturing

    • Shujuan Ma
    • Lei Cao
    • Xin Zhuang

    Original Research Article 16 April 2024

    

32. Surface Strengthening of Aerospace Material of Inconel 718 by GOV (Flow Peening) Process

    • Mehmet Hanifi Doğru
    • Murat Kalak
    • Kursad Gov

    Original Research Article 16 April 2024

    

33. Oxidation Behavior of Ni-Based Oxide Dispersion-Strengthened Alloy Fabricated by Direct Energy Deposition at 1100 °C

    • Changyu Ma
    • Bruce S. Kang

    Original Research Article 16 April 2024

    

34. Comparative Analysis of Microstructure Evolution and Mechanical Properties of Dissimilar Welded Joints of AA7075/AA6061 via Friction Stir Welding, Tungsten Inert Gas Welding, and Tungsten Inert Gas + Friction Stir Processing

    • Rajeev Rana
    • D. B. Karunakar
    • Thomas Mathew

    Original Research Article 16 April 2024

    

35. The Role of Microstructure in the Gradient of Tensile Properties through Thickness in 7449 Aluminium Alloy Thick Plate

    • J. A. Heredero
    • J. Medina
    • P. Adeva

    Original Research Article Open access 15 April 2024

    

36. Preparation of Bronze (CuSn10) Parts by Material Extrusion Process Using Paraffin-Based Binder

    • Kai Jin
    • Gemin Li
    • Jigui Cheng

    Original Research Article 15 April 2024

    

37. Experimental Investigation on Microstructure and Mechanical Properties of 15CDV6 High Strength Low Alloy Steel Welded Using Spin Arc Gas Metal Arc Welding Process

    • G. Rajesh Kannan
    • P. Sathiya
    • M. Umar

    Original Research Article 15 April 2024

    

38. Investigation of Electrochemical and Thermal Properties of Ti₅₀Ni_40−xZr₁₀Nb_x SMAs

    • Shakhawan Salih Abdullah
    • Esra Balci
    • Fethi Dagdelen

    Original Research Article 15 April 2024

    

39. Investigation of the Combined Effects of Stress Concentrations and Plasma Nitriding Parameters on the Fatigue Performance of AISI 4140 Low Alloy Steel

    • F. Yılan
    • H. Kovacı

    Original Research Article 15 April 2024

    

40. Modeling Direct Quenching Effects on Microstructural Evolutions in AISI 4140 Steel: A Finite Volume Approach

    • Amirhossein Meysami
    • Goodarz Ahmadi
    • Alex Meisami

    Original Research Article 15 April 2024

    

41. Modeling the Effects of Tool Pin Configurations and Friction Stir Processing Parameters on Tungsten Inert Gas Welded Dissimilar Aluminum Alloy Joints

    • Md Saquib Bin Reyaz
    • Amar Nath Sinha

    Original Research Article 15 April 2024

    

42. Microwave Absorption Properties of Flaky Carbonyl Iron @ Fe₃O₄ Produced by Plasma-Assisted Ball Milling

    • Xian Liu
    • Na Liu
    • Zhongchen Lu

    Original Research Article 15 April 2024

    

43. Microstructural Evolution and Mechanical Properties of AZ31 Magnesium Alloy Processed through Constrained Groove Pressing at Different Deformations and Temperatures

    • Li Yu

    Original Research Article 15 April 2024

    

44. Analysis of Microstructural Transformations Induced by Thermal Aging of Co-Cr-Ni-W-C Alloy Deposits and Their Impact on Corrosion Behavior in a 3.5% NaCl Medium

    • Abdelaziz Sellidj
    • Rym Mekideche
    • Bachir Zaid

    Original Research Article 15 April 2024

    

45. Microstructural Characteristics and Mechanical Properties of Friction Stir Welded 2219 Aluminum Alloy Plate After Spinning and Heat Treatment

    • Z. L. Chang
    • M. H. Huang
    • L. H. Zhan

    Original Research Article 12 April 2024

    

46. Austempering and Bainitic Transformation Kinetics of AISI 52100

    • Haoxing You
    • Mei Yang
    • Richard D. Sisson Jr.

    Original Research Article 12 April 2024

    

47. Research on Regulation Mechanism of TiO₂ Photocathodic Protection Based on Cohesive Energy, Defect Patterns, and Nanofilm Size

    • Wan Sun
    • Guoqing Gou
    • Wei Gao

    Original Research Article 12 April 2024

    

48. The Oxidation Behavior of Spark Plasma Sintered Ti-48Al Alloys

    • P. S. Sankara Rama Krishnan
    • K. P. Davidson
    • R. V. Ramanujan

    Original Research Article 12 April 2024

    

49. Multi-objective Optimization in Selective Laser Melting of AlSi10Mg Alloy Based on Response Surface Methodology

    • Junsong Liu
    • Yan Shi

    Original Research Article 12 April 2024

    

50. Correction: Microstructures and Mechanical Behaviors of Ni-Based Single-Crystal Superalloy DD90 Joints Brazed with a Co-Based Interlayer

    • F. Gao
    • J. D. Liu
    • J. G. Li

    Correction 11 April 2024