1. Editorial

   • David Laughlin

   Editorial 26 October 2016 Pages: 3193 - 3193

2. Digitalizing the Circular Economy

   • Markus A. Reuter

   2016 TMS EPD Distinguished Lecture Award 13 September 2016 Pages: 3194 - 3220

   

3. Chemically Induced Solidification: A New Way to Produce Thin Solid-Near-Net Shapes

   • Carl Slater
   • Stephen Spooner
   • Seetharaman Sridhar

   Communication Open access 26 September 2016 Pages: 3221 - 3224

   

4. Effect of Physicochemical Properties of Slag and Flux on the Removal Rate of Oxide Inclusion from Molten Steel

   • Jun Seok Park
   • Joo Hyun Park

   Communication 19 August 2016 Pages: 3225 - 3230

   

5. Effect of a Transverse Magnetic Field on Stray Grain Formation of Ni-Based Single Crystal Superalloy During Directional Solidification

   • Weidong Xuan
   • Huan Liu
   • Zhongming Ren

   Communication 22 August 2016 Pages: 3231 - 3236

   

6. Stabilization of Free Lime in BOF Slag by Melting and Solidification in Air

   • Chunwei Liu
   • Muxing Guo
   • Shuigen Huang

   Communication 06 September 2016 Pages: 3237 - 3240

   

7. Regarding "Sulfide Capacity in Ladle Slag at Steelmaking Temperatures," C. Allertz, Du Sichen; MMTB 2015 December

   • Arthur Pelton
   • Youn-Bae Kang

   Letter to the Editor 07 September 2016 Pages: 3241 - 3243

   

8. Advances in Materials Manufacturing II

   • Xinjin Cao
   • Kumar Sadayappan
   • X.-Grant Chen

   Foreword 02 September 2016 Pages: 3244 - 3244

9. Post-weld Tempered Microstructure and Mechanical Properties of Hybrid Laser-Arc Welded Cast Martensitic Stainless Steel CA6NM

   • Fatemeh Mirakhorli
   • Xinjin Cao
   • Jean-Luc Fihey

   OriginalPaper 14 January 2016 Pages: 3245 - 3256

   

10. Amorphous Phase Formation Analysis of Rapidly Solidified CoCr Droplets

    • Abdoul-Aziz Bogno
    • Carlos Riveros
    • Delin Li

    OriginalPaper 23 March 2016 Pages: 3257 - 3265

    

11. A Modified Cast-on Method for the Reinforcement of Aluminum Castings with Dissimilar Metals

    • Qingyou Han

    OriginalPaper 29 February 2016 Pages: 3266 - 3273

    

12. Formation of Inclusions in Ti-Stabilized 17Cr Austenitic Stainless Steel

    • Xue Yin
    • Yanhui Sun
    • Alex Mclean

    OriginalPaper 25 April 2016 Pages: 3274 - 3284

    

13. The Interface of TiB₂ and Al₃Ti in Molten Aluminum

    • Xiaoming Wang
    • Jie Song
    • Qingyou Han

    OriginalPaper 30 December 2015 Pages: 3285 - 3290

    

14. Evolution of Intermetallics, Dispersoids, and Elevated Temperature Properties at Various Fe Contents in Al-Mn-Mg 3004 Alloys

    • K. Liu
    • X.-G. Chen

    OriginalPaper 29 December 2015 Pages: 3291 - 3300

    

15. Evolution of the Spectral Emissivity and Phase Transformations of the Al-Si Coating on Usibor^® 1500P Steel During Austenitization

    • Cangji Shi
    • Kyle J. Daun
    • Mary A. Wells

    OriginalPaper 29 August 2016 Pages: 3301 - 3309

    

16. Selective Laser Treatment on Cold-Sprayed Titanium Coatings: Numerical Modeling and Experimental Analysis

    • Pierpaolo Carlone
    • Antonello Astarita
    • Paolo Aprea

    OriginalPaper 07 March 2016 Pages: 3310 - 3317

    

17. Microstructure and Texture Evolution in a Yttrium-Containing ZM31 Alloy: Effect of Pre- and Post-deformation Annealing

    • N. Tahreen
    • D. F. Zhang
    • D. L. Chen

    OriginalPaper 30 December 2015 Pages: 3318 - 3325

    

18. Texture Evaluation of a Bi-Modal Structure During Static Recrystallization of Hot-Deformed Mg-Al-Sn Alloy

    • Abu Syed Humaun Kabir
    • Jing Su
    • Stephen Yue

    OriginalPaper 24 February 2016 Pages: 3326 - 3332

    

19. Mechanical Properties of Mg-Gd and Mg-Y Solid Solutions

    • Anna Kula
    • Xiaohui Jia
    • Marek Niewczas

    OriginalPaper 31 December 2015 Pages: 3333 - 3342

    

20. Development of Low-Fluoride Slag for Electroslag Remelting: Role of Li₂O on the Viscosity and Structure of the Slag

    • Cheng-Bin Shi
    • Seung-Ho Shin
    • Jing Li

    OriginalPaper 07 October 2016 Pages: 3343 - 3349

    

21. Modeling of Droplet Generation in a Top Blowing Steelmaking Process

    • Bapin Kumar Rout
    • Geoff Brooks
    • Zushu Li

    OriginalPaper 09 August 2016 Pages: 3350 - 3361

    

22. Bubble Formation at a Submerged Orifice in High-Speed Horizontal Oscillation

    • Ningzhen Wang
    • Xiang Chen
    • Yuan Liu

    Technical Publication 17 August 2016 Pages: 3362 - 3374

    

23. In SituObservation of MgO Inclusions in Liquid Iron-Aluminum Alloys

    • Haoyuan Mu
    • Tongsheng Zhang
    • Bryan A. Webler

    OriginalPaper 25 August 2016 Pages: 3375 - 3383

    

24. Comparison of CFD Simulations with Experimental Measurements of Nozzle Clogging in Continuous Casting of Steels

    • Mahdi Mohammadi-Ghaleni
    • Mohsen Asle Zaeem
    • Ronald O’Malley

    OriginalPaper 23 August 2016 Pages: 3384 - 3393

    

25. Electrochemical Deoxidation of Titanium and Its Alloy Using Molten Magnesium Chloride

    • Yu-ki Taninouchi
    • Yuki Hamanaka
    • Toru H. Okabe

    OriginalPaper 29 August 2016 Pages: 3394 - 3404

    

26. A Novel Process to Synthesize High-Quality Ferrovanadium Nitride

    • Yue-Dong Wu
    • Guo-Hua Zhang
    • Kuo-Chih Chou

    OriginalPaper 23 August 2016 Pages: 3405 - 3412

    

27. Experimental Determination of the Liquidus Surface of the Cu-O-ZnO-CaO System in Equilibrium with Air

    • Longgong Xia
    • Zhihong Liu
    • Pekka Taskinen

    OriginalPaper 30 August 2016 Pages: 3413 - 3420

    

28. Investigation of High-Temperature Slag/Copper/Spinel Interactions

    • Evelien De Wilde
    • Inge Bellemans
    • Kim Verbeken

    OriginalPaper 07 September 2016 Pages: 3421 - 3434

    

29. Removal of Inclusions from Molten Aluminum by Supergravity Filtration

    • Gaoyang Song
    • Bo Song
    • Jing Zhang

    Technical Publication 20 September 2016 Pages: 3435 - 3445

    

30. Solidification Structure and Macrosegregation of Billet Continuous Casting Process with Dual Electromagnetic Stirrings in Mold and Final Stage of Solidification: A Numerical Study

    • D. Jiang
    • M. Zhu

    OriginalPaper 17 August 2016 Pages: 3446 - 3458

    

31. Whisker Formation in Porosity in Al Alloys

    • William David Griffiths
    • Ahmed Elsayed
    • Mahmoud Ahmed El-Sayed

    OriginalPaper Open access 07 September 2016 Pages: 3459 - 3468

    

32. Evaluation of the Effects of Rotary Degassing Process Variables on the Quality of A357 Aluminum Alloy Castings

    • M. Mostafaei
    • M. Ghobadi
    • Murat Tiryakioğlu

    Technical Publication 18 August 2016 Pages: 3469 - 3475

    

33. Flow Driven by an Archimedean Helical Permanent Magnetic Field. Part II: Transient and Modulated Flow Behaviors

    • Bo Wang
    • Xiaodong Wang
    • Florin Baltaretu

    Technical Publication 15 August 2016 Pages: 3476 - 3488

    

34. Computational Fluid Dynamics Simulation of the Hydrogen Reduction of Magnetite Concentrate in a Laboratory Flash Reactor

    • De-Qiu Fan
    • H. Y. Sohn
    • Mohamed Elzohiery

    OriginalPaper 23 August 2016 Pages: 3489 - 3500

    

35. Reduction of Liquid Clad Formation Due to Solid State Diffusion in Clad Brazing Sheet

    • Michael J. Benoit
    • Mark A. Whitney
    • Sooky Winkler

    OriginalPaper 06 September 2016 Pages: 3501 - 3510

    

36. Study on the Kinetics of Aluminum Removal from Liquid Silicon to Slag with Mechanical Stirring

    • Jaewoo Lee
    • Jesse F. White
    • Du Sichen

    OriginalPaper Open access 09 August 2016 Pages: 3511 - 3518

    

37. Effect of Experimental Conditions on Cementite Formation During Reduction of Iron Ore Pellets

    • Mania Kazemi
    • Du Sichen

    Technical Publication Open access 15 August 2016 Pages: 3519 - 3526

    

38. Thermodynamics and Structure of CaO-Al₂O₃-3 Mass Pct B₂O₃ Slag at 1773 K (1500 °C)

    • Qifeng Shu
    • Pengfei Li
    • Kuochih Chou

    OriginalPaper 15 August 2016 Pages: 3527 - 3532

    

39. Combustion Methods for Measuring Low Levels of Carbon in Nickel, Copper, Silver, and Gold

    • Nathan S. Jacobson
    • Kayvon Savadkouei
    • Evan H. Copland

    OriginalPaper 06 September 2016 Pages: 3533 - 3543

    

40. A Mathematical Model for the Reduction Stage of the CAS-OB Process

    • Petri Sulasalmi
    • Ville-Valtteri Visuri
    • Timo Fabritius

    OriginalPaper 12 August 2016 Pages: 3544 - 3556

    

41. Fundamental Research on a New Process to Remove Al³⁺ as Potassium Alum during Lithium Extraction from Lepidolite

    • Hui Guo
    • Ge Kuang
    • Song Hu

    Technical Publication 09 August 2016 Pages: 3557 - 3564

    

42. X-ray Microprobe Investigation of Iron During a Simulated Silicon Feedstock Extraction Process

    • Sarah Bernardis
    • Sirine C. Fakra
    • Tonio Buonassisi

    OriginalPaper 23 August 2016 Pages: 3565 - 3574

    

43. Study of Single-Power, Two-Circuit ESR Process with Current-Carrying Mold: Development of the Technique and Its Physical Simulation

    • Yanwu Dong
    • Zhouhua Jiang
    • Kean Yao

    OriginalPaper 12 October 2016 Pages: 3575 - 3581