1. Structural Roles of Boron and Silicon in the CaO-SiO₂-B₂O₃ Glasses Using FTIR, Raman, and NMR Spectroscopy

   • Yongqi Sun
   • Zuotai Zhang

   Communication 27 May 2015 Pages: 1549 - 1554

   

2. Effect of Agitation on Crystallization Behavior of CaO-Al₂O₃-SiO₂-Na₂O-CaF₂ Mold Fluxes with Varying Basicity

   • Jiangling Li
   • Qifeng Shu
   • Kuochih Chou

   OriginalPaper 28 April 2015 Pages: 1555 - 1563

   

3. Reply to Discussion of “Observation of the Mold Filling Process of a Large Hydro-Turbine Guide Vane Casting”

   • Jinwu Kang
   • Haimin Long
   • Chengchun Zhang

   OriginalPaper 17 June 2015 Pages: 1564 - 1564

4. Foreword: Advances in Materials Manufacturing

   Foreword 02 July 2015 Pages: 1565 - 1565

5. Effects of Iron-Rich Intermetallics on Tensile Deformation of Al-Cu 206 Cast Alloys

   • K. Liu
   • X. Cao
   • X. -G. Chen

   OriginalPaper 24 January 2015 Pages: 1566 - 1575

   

6. Characterization of Pore Defects and Fatigue Cracks in Die Cast AM60 Using 3D X-ray Computed Tomography

   • Zhuofei Yang
   • Jidong Kang
   • David S. Wilkinson

   OriginalPaper 19 May 2015 Pages: 1576 - 1585

   

7. Development of an Optimization Methodology for the Aluminum Alloy Wheel Casting Process

   • Jianglan Duan
   • Carl Reilly
   • Andre B. Phillion

   OriginalPaper 07 April 2015 Pages: 1586 - 1595

   

8. Fabrication of Al-TiB₂ Nanocomposites by Flux-Assisted Melt Stirring

   • Ahmed M. Nabawy
   • X.-Grant Chen

   OriginalPaper 13 January 2015 Pages: 1596 - 1602

   

9. Ultrasonic Processing of Materials

   • Qingyou Han

   OriginalPaper 30 January 2015 Pages: 1603 - 1614

   

10. In Situ Synchrotron X-ray Study of Ultrasound Cavitation and Its Effect on Solidification Microstructures

    • Jiawei Mi
    • Dongyue Tan
    • Tung Lik Lee

    OriginalPaper Open access 11 December 2014 Pages: 1615 - 1619

    

11. On the Understanding of Aluminum Grain Refinement by Al-Ti-B Type Master Alloys

    • Xiaoming Wang
    • Zhiwei Liu
    • Qingyou Han

    OriginalPaper 25 November 2014 Pages: 1620 - 1625

    

12. Residual Stresses and Tensile Properties of Friction Stir Welded AZ31B-H24 Magnesium Alloy in Lap Configuration

    • Bhukya Srinivasa Naik
    • Xinjin Cao
    • Daolun Chen

    OriginalPaper 14 April 2015 Pages: 1626 - 1637

    

13. Analysis of Microstructural Changes in the Heat-Affected Zone and Fusion Zone of a Fiber Laser Welded DP980 Steel

    • Jianqi Zhang
    • Abdul Khan
    • Daolun Chen

    OriginalPaper 07 January 2015 Pages: 1638 - 1646

    

14. Effect of Ga on the Wettability of CuGa10 on 304L Steel

    • Frank Silze
    • Gunther Wiehl
    • Simon Pauly

    OriginalPaper 21 March 2015 Pages: 1647 - 1653

    

15. Microstructural Development and Technical Challenges in Laser Additive Manufacturing: Case Study with a 316L Industrial Part

    • Manuel Marya
    • Virendra Singh
    • Jean Yves Hascoet

    OriginalPaper 25 February 2015 Pages: 1654 - 1665

    

16. On the Densification Behavior of (0.2, 0.5, and 1 Wt Pct) CNT-YSZ Ceramic Composites Processed via Spark Plasma Sintering

    • Abhinav Karanam
    • Lukas Bichler
    • Randy Fong

    OriginalPaper 28 March 2015 Pages: 1666 - 1673

    

17. Influence of Static Precipitation on Microstructure and Texture of Annealed Cold-Rolled Mg-Al-Sn Alloys

    • Abu Syed Humaun Kabir
    • Mehdi Sanjari
    • Stephen Yue

    OriginalPaper 24 February 2015 Pages: 1674 - 1683

    

18. Elucidation of the Nature of Structural Heterogeneity During Alkali Leaching of Non-activated and Mechanically Activated Boehmite (γ-AlOOH)

    • Rakesh Kumar
    • Thomas C. Alex

    OriginalPaper 25 April 2015 Pages: 1684 - 1701

    

19. Conversion of Sulfur by Wet Oxidation in the Bayer Process

    • Zhanwei Liu
    • Wangxing Li
    • Guobao Wu

    OriginalPaper 21 April 2015 Pages: 1702 - 1708

    

20. Reductive Leaching of Low-Grade Pyrolusite with Formic Acid

    • Youzhi Lu
    • Huaju Ma
    • Zeguang Zhou

    OriginalPaper 02 June 2015 Pages: 1709 - 1715

    

21. Kinetics of the Reduction of Hematite Concentrate Particles by Carbon Monoxide Relevant to a Novel Flash Ironmaking Process

    • Feng Chen
    • Yousef Mohassab
    • Hong Yong Sohn

    OriginalPaper 18 April 2015 Pages: 1716 - 1728

    

22. Behavior of Zn and Fe Content in Electric Arc Furnace Dust as Submitted to Chlorination Methods

    • Felipe Santos
    • Eduardo Brocchi
    • Rodrigo Souza

    OriginalPaper 21 April 2015 Pages: 1729 - 1741

    

23. The Sintering Characteristics of Mixing SiO₂ with Calcium Ferrite at 1473 K (1200 °C)

    • Xiang Ding
    • Xing-Min Guo

    OriginalPaper 22 April 2015 Pages: 1742 - 1750

    

24. Structure, Growth Process, and Growth Mechanism of Perovskite in High-Titanium-Bearing Blast Furnace Slag

    • Lu Liu
    • Meilong Hu
    • Yunhua Gan

    OriginalPaper 27 May 2015 Pages: 1751 - 1759

    

25. Electrochemical and Crystallographic Aspects of Lead Granular Growth

    • Nebojša D. Nikolić
    • Evica R. Ivanović
    • Miomir G. Pavlović

    OriginalPaper 03 June 2015 Pages: 1760 - 1774

    

26. Determination of Alloying Elements Ti, Nb, Mn, Ni, and Cr in Double-Stabilized Ferritic Stainless Steel Process Sample Using an Electrolytic Extraction Method and Separate Analysis of Inclusions

    • Teija Sipola
    • Tuomas Alatarvas
    • Timo Fabritius

    OriginalPaper 12 May 2015 Pages: 1775 - 1781

    

27. Critical Evaluation and Thermodynamic Optimization of the Ti-C-O System and Its Applications to Carbothermic TiO₂ Reduction Process

    • Zhanmin Cao
    • Wei Xie
    • Zhiyu Qiao

    OriginalPaper 22 April 2015 Pages: 1782 - 1801

    

28. Effects of MgO and Al₂O₃ Addition on Redox State of Chromium in CaO-SiO₂-CrO _x Slag System by XPS Method

    • Li-jun Wang
    • Ji-peng Yu
    • Seshadri Seetharaman

    OriginalPaper 22 April 2015 Pages: 1802 - 1808

    

29. Stability Diagram of Mg-Al-O System Inclusions in Molten Steel

    • Lifeng Zhang
    • Ying Ren
    • Liyuan Sun

    OriginalPaper 29 May 2015 Pages: 1809 - 1825

    

30. Aluminum Deoxidation Equilibria in Liquid Iron: Part I. Experimental

    • Min-Kyu Paek
    • Jung-Mock Jang
    • Jong-Jin Pak

    OriginalPaper 20 May 2015 Pages: 1826 - 1836

    

31. A Comprehensive 3D Mathematical Model of the Electroslag Remelting Process

    • Xiaohua Wang
    • Ying Li

    OriginalPaper 19 May 2015 Pages: 1837 - 1849

    

32. The Influence of Na₂O on the Solidification and Crystallization Behavior of CaO-SiO₂-Al₂O₃-Based Mold Flux

    • Jinxing Gao
    • Guanghua Wen
    • Qiang Liu

    OriginalPaper 20 May 2015 Pages: 1850 - 1859

    

33. A Comprehensive Case Study of Macrosegregation in a Steel Ingot

    • Ed J. Pickering
    • Connor Chesman
    • Jesus Talamantes-Silva

    OriginalPaper 09 June 2015 Pages: 1860 - 1874

    

34. Reaction Between MnO-SiO₂-FeO Solid Oxide and Solid Steel Deoxidized by Si and Mn During Heat Treatment at 1473 K (1200 °C)

    • Cheng-song Liu
    • Kyung-Ho Kim
    • Shin-ya Kitamura

    OriginalPaper 05 May 2015 Pages: 1875 - 1884

    

35. Effect of Temperature Reversion on Hot Ductility and Flow Stress–Strain Curves of C-Mn Continuously Cast Steels

    • Zhihua Dong
    • Wei Li
    • Levente Vitos

    OriginalPaper 21 April 2015 Pages: 1885 - 1894

    

36. The Influence of Eddy Effect of Coils on Flow and Temperature Fields of Molten Droplet in Electromagnetic Levitation Device

    • Lin Feng
    • Wan-Yuan Shi

    OriginalPaper 30 April 2015 Pages: 1895 - 1901

    

37. Study of Solidification and Heat Transfer Behavior of Mold Flux Through Mold Flux Heat Transfer Simulator Technique: Part II. Effect of Mold Oscillation on Heat Transfer Behaviors

    • Fanjun Ma
    • Yongzhen Liu
    • Haihui Zhang

    OriginalPaper 19 May 2015 Pages: 1902 - 1911

    

38. Processing and Characterization of Carbonate-Free BaTiO₃ Nanoscale Particles Obtained by a Rapid Ultrasound-Assisted Wet Chemical Approach

    • Rouholah Ashiri
    • Abdolmajid Moghtada
    • Ali Shahrouzianfar

    OriginalPaper 30 May 2015 Pages: 1912 - 1923

    

39. Energy Characterization of Short-Circuiting Transfer of Metal Droplet in Gas Metal Arc Welding

    • Luo Yi
    • Zhu Yang
    • Wan Rui

    OriginalPaper 29 May 2015 Pages: 1924 - 1934

    

40. Study on Surface Depression of Ti-6Al-4V with Ultrahigh-Frequency Pulsed Gas Tungsten Arc Welding

    • Yang Mingxuan
    • Yang Zhou
    • Qi Bojin

    OriginalPaper 12 June 2015 Pages: 1935 - 1941

    

41. A Multi-scale Thermomechanical-Solidification Model to Simulate the Transient Force Field Deforming an Aluminum 6061 Semisolid Weld

    • H. R. Zareie Rajani
    • A. B. Phillion

    OriginalPaper 12 June 2015 Pages: 1942 - 1950

    

42. Effect of Aluminum Coating on the Surface Properties of Ti-(~49 at. pct) Ni Alloy

    • Arijit Sinha
    • Gobinda Gopal Khan
    • Partha Protim Chattopadhyay

    OriginalPaper 11 June 2015 Pages: 1951 - 1958

    

43. Two-Phase CFD Model of the Bubble-Driven Flow in the Molten Electrolyte Layer of a Hall–Héroult Aluminum Cell

    • Yuqing Feng
    • M. Philip Schwarz
    • Mark Cooksey

    OriginalPaper 01 May 2015 Pages: 1959 - 1981

    

44. Mass Transfer at the Cathode in Alumina Reduction Cells: Behavior of Different Structure Models for NaF-AlF₃ Melts

    • Asbjørn Solheim

    OriginalPaper 27 May 2015 Pages: 1982 - 1989

    

45. Numerical and Experimental Investigations of the Effect of Melt Delivery Nozzle Design on the Open- to Closed-Wake Transition in Closed-Coupled Gas Atomization

    • Shahed Motaman
    • Andrew M. Mullis
    • Duncan J. Borman

    OriginalPaper 17 April 2015 Pages: 1990 - 2004

    

46. Effect of Fluorine on the Structure of High Al₂O₃-Bearing System by Molecular Dynamics Simulation

    • Guozheng Fan
    • Shengping He
    • Qian Wang

    OriginalPaper 30 April 2015 Pages: 2005 - 2013

    

47. Erratum to: Elucidation of the Nature of Structural Heterogeneity During Alkali Leaching of Non-activated and Mechanically Activated Boehmite (γ-AlOOH)

    • Rakesh Kumar
    • Thomas C. Alex

    Erratum 20 May 2015 Pages: 2014 - 2014