1. Sustainability: The materials role

   • Lyle H. Schwartz

   OriginalPaper Pages: 157 - 170

2. Micropyretic synthesis studies of Ni-, Al-, Ti-, and Nb-containing alloys

   • G. K. Dey
   • J. A. Sekhar

   OriginalPaper Pages: 171 - 188

3. A solution chemistry approach to the study of rare earth element precipitation by oxalic acid

   • R. Chi
   • Z. Xu

   OriginalPaper Pages: 189 - 195

4. Preparation of ammonium chloroplatinate by a precipitation stripping of Pt(IV)-loaded alamine 336 or TBP

   • Sumiko Sanuki
   • Yukako Matsumoto
   • Hiroshi Majima

   OriginalPaper Pages: 197 - 203

5. Studies on the chlorination of zircon: Part I. Static bed investigations

   • A. C. Bidaye
   • C. K. Gupta
   • S. Venkatachalam

   OriginalPaper Pages: 205 - 213

6. A study of the reduction rate of FeO in slag by solid carbon

   • D. J. Min
   • J. W. Han
   • W. S. Chung

   OriginalPaper Pages: 215 - 221

7. Kinetics and mechanism of electroless copper deposition at moderate-to-high copper ion and low-to-moderate formaldehyde concentrations

   • K. G. Mishra
   • R. K. Paramguru

   OriginalPaper Pages: 223 - 229

8. Model study on mixing and mass transfer in ferroalloy refining processes

   • G. Akdogan
   • R. H. Eric

   OriginalPaper Pages: 231 - 239

9. Settling of multisized clusters of alumina particles in liquid aluminum

   • C. Tian
   • G. A. Irons
   • D. S. Wilkinson

   OriginalPaper Pages: 241 - 247

10. Quantitative evaluation of inclusion in deoxidation of Fe-10 mass pct Ni alloy with Si, Ti, Al, Zr, and Ce

    • Andrey Karasev
    • Hideaki Suito

    OriginalPaper Pages: 249 - 257

11. Analysis of size distributions of primary oxide inclusions in Fe-10 mass Pct Ni-M (M=Si, Ti, Al, Zr, and Ce) alloy

    • Andrey Karasev
    • Hideaki Suito

    OriginalPaper Pages: 259 - 270

12. Thermodynamic calculation for alloy systems

    • Xueyong Ding
    • Wenzhong Wang
    • Peng Fan

    OriginalPaper Pages: 271 - 277

13. Kinetics of simultaneous reactions between liquid iron-carbon alloys and slags containing MnO

    • Etsuro Shibata
    • Haiping Sun
    • Katsumi Mori

    OriginalPaper Pages: 279 - 286

14. Modeling the fluid-flow-induced stress and collapse in a dendritic network

    • A. K. Dahle
    • D. H. St. John
    • L. Arnberg

    OriginalPaper Pages: 287 - 293

15. Influence of pellet composition and structure on carbothermic reduction of silica

    • A. Agarwal
    • U. Pad

    OriginalPaper Pages: 295 - 306

16. A pilot-scale trial of an improved galvanic deoxidation process for refining molten copper

    • P. Soral
    • U. Pal
    • B. Schroeder

    OriginalPaper Pages: 307 - 321

17. Two-dimensional dynamic simulation of the thermal state of ladles

    • Tom P. Fredman
    • J. Torrkulla
    • H. Saxén

    OriginalPaper Pages: 323 - 330

18. A mathematical model for the dynamic behavior of melts subjected to electromagnetic forces: Part II. Measurement of surface waves and comparison with predictions of the mathematical model

    • R. Kageyama
    • J. W. Evans

    OriginalPaper Pages: 331 - 339

19. The influence of the initial shape and position of an anode and the curvature of the aluminum on the current distribution in prebaked aluminum cells

    • J. Zoric
    • J. Thonstad
    • T. Haarberg

    OriginalPaper Pages: 341 - 348

20. Discussion of “mixing time and fluid flow phenomena in liquids of varying kinematic viscosities agitated by bottom gas injection”

    • Dipak Mazumdar
    • R. I. L. Guthrie
    • Dipak Mazumdar

    Communications Pages: 349 - 351

21. Authors’ reply

    • Manabu Iguchi
    • Kei-Ichi Nakamura
    • Ryoji Tsujino

    Communications Pages: 351 - 352

22. Thermodynamics of yttrium and oxygen in molten zirconium

    • Yoshinao Kobayashi
    • Fumitaka Tsukihashi

    Communications Pages: 352 - 354