Temperature dependence of yield stress in fe-1.67 at. pct Cu and fe-0.5 at. pct Au S. K. LahiriM. E. Fine OriginalPaper Pages: 1495 - 1499
The reduction of Al2O3 to aluminum in a plasma Roger K. RainsRobert H. Kadlec OriginalPaper Pages: 1501 - 1506
Diffusion of H2-H2O through porous iron formed by the reduction of iron oxides R. G. OlssonW. M. McKewan OriginalPaper Pages: 1507 - 1512
The influence of austenite strength upon the austenite-martensite transformation in alloy steels Edward M. BreinanGeorge S. Ansell OriginalPaper Pages: 1513 - 1520
Thermomechanical treatment and transformation characteristics of Fe-Mn austenites DJ. DrobnjakJ. Gordon Parr OriginalPaper Pages: 1521 - 1526
Preparation of titania from llmenite by selective H2S sulfidization S. K. JainP. M. PrasadP. K. Jena OriginalPaper Pages: 1527 - 1530
The viscosities of lead, tin, and Pb-Sn alloys H. R. ThreshA. F. Crawley OriginalPaper Pages: 1531 - 1535
Correlation of structure and superconducting properties in Nb(Cb)-Ti quaternary alloys R. L. RickettsT. H. CourtneyJ. Wulff OriginalPaper Pages: 1537 - 1544
Microcracking sensitivity in Fe-C plate martensite A. R. MarderA. O. BenscoterG. Krauss OriginalPaper Pages: 1545 - 1549
The effect of heat treatment on the fracture toughness and subcritical crack growth characteristics of a 350-grade maraging steel C. S. Carter OriginalPaper Pages: 1551 - 1559
The stacking fault energy in noble metal alloys T. C. TisoneR. C. SundahlG. Y. Chin OriginalPaper Pages: 1561 - 1567
Multiple necking of tungsten fibers in a brass-tungsten composite Richard M. VennettStanley M. WolfAlbert P. Levitt OriginalPaper Pages: 1569 - 1575
The martensite phases in 304 stainless steel Pat L. MangononGareth Thomas OriginalPaper Pages: 1577 - 1586
Structure and properties of thermal-mechanically treated 304 stainless steel Pat L. MangononGareth Thomas OriginalPaper Pages: 1587 - 1594
Fatigue of a glass bead blasted nickel-base superalloy L. H. BurckC. P. SullivanC. H. Wells OriginalPaper Pages: 1595 - 1600
Analysis of proton scattering patterns for identification of silicon carbide phases C. S. Barrett OriginalPaper Pages: 1601 - 1605
The strain rate dependent plastic flow behavior of zirconium and its alloys D. Lee OriginalPaper Pages: 1607 - 1616
Surface distortions in twinned niobium (Columbium) crystals Roman J. Wasilewski OriginalPaper Pages: 1617 - 1622
Cellular precipitation in Ni-51Cr lamellar eutectic and cast Ni-44Cr alloys Ram Kossowsky OriginalPaper Pages: 1623 - 1627
Effect of hot-rolling texture on the plastic strain ratio of low-carbon steels S. R. GoodmanHsun Hu OriginalPaper Pages: 1629 - 1640
Mechanical properties and structure of age-hardened Ti-Cu alloys G. LütjeringS. Weissmann OriginalPaper Pages: 1641 - 1649
Solution kinetics of CuAl2 in an Al-4Cu alloy D. L. BatyR. A. TanzilliR. W. Heckel OriginalPaper Pages: 1651 - 1656
Fatigue life and twinning in alpha-zirconium M. R. WarrenC. J. Beevers OriginalPaper Pages: 1657 - 1661
Dislocation damage in tantalum after cyclic loading Y. KomemD. G. Brandon OriginalPaper Pages: 1663 - 1668
Analysis of diffusion paths in a three-component system Louis S. CastlemanGerard F. Johnson OriginalPaper Pages: 1669 - 1676
Martensite-to-austenite reverse transformation in Fe-Ni-Co alloys D. A. Colling OriginalPaper Pages: 1677 - 1682
Preparation and properties of high-purity vanadium and V-15Cr-5Ti C. T. WangE. F. BarochY. S. Shen OriginalPaper Pages: 1683 - 1689
Thermodynamics of the system NaF-AlF3 Part I: The equilibrium 6NaF(s) + Al = Na3AlF6(s) + 3Na E. W. Dewing OriginalPaper Pages: 1691 - 1694
The role of oxide microstructure and growth stresses in the high-temperature scaling of nickel F. N. RhinesJ. S. Wolf OriginalPaper Pages: 1701 - 1710
High temperature-high strain rate fracture of inconel 600 E. ShapiroG. E. Dieter OriginalPaper Pages: 1711 - 1719
Derivation of the stress states for (111) (112) multiple slip and twinning G. Y. ChinW. L. Mammel OriginalPaper Pages: 1721 - 1727
Kinetics and mechanism of llmenite reduction with graphite M. I. El-GuindyW. G. Davenport OriginalPaper Pages: 1729 - 1734
The effect of two-step aging on the quench sensitivity of an Al-5 Pct Zn-2 Pct Mg alloy with and without 0.1 Pct Cr W. F. SmithN. J. Grant OriginalPaper Pages: 1735 - 1740
Environmental fatigue crack propagation of aluminum alloys at low stress intensity levels John A. FeeneyJ. Corey McmillanRobert P. Wei OriginalPaper Pages: 1741 - 1757
The hardness and grain size of consolidated fine tungsten powder U. K. VashiR. W. ArmstrongG. E. Zima Communications Pages: 1769 - 1771
The mechanical behavior of 6063 aluminum R. MignognaC. D’antonioK. Mukherjee Communications Pages: 1771 - 1772
Marker transport during the early stages of sintering F. V. LenelG. S. AnsellD. D. Barron Communications Pages: 1772 - 1773
Silicon-Carbon interaction and its effect on the notch toughness of mild steel Philip AbramowitzRichard A. Moll Communications Pages: 1773 - 1775
Some observations on the hardenability of Ti-6Al-6V-2Sn Charles F. HickeyPaul J. Fopiano Communications Pages: 1775 - 1777
Dislocation diffusion in niobium (columbium) single crystals T. C. ReutherM. R. Aachter Communications Pages: 1777 - 1779
Thermodynamic investigation of liquid Ca-Sn, Sr-Sn, and Ba-Sn Alloys J. R. GuadagnoM. J. PoolS. S. Shen Communications Pages: 1779 - 1780
Plastic deformation in nickel crystals P. S. VenkatesanD. N. Beshers Communications Pages: 1780 - 1782
Annealing twin frequency in lead and lead base alloys C. J. SimpsonK. T. AustW. C. Winegard Communications Pages: 1782 - 1783
Discussion of “the ‘lamellar to fibrous transition’ and orientation relationships in the Sn-Zn and Al-AL3Ni eutectic systems“ M. J. Salkind Communications Pages: 1786 - 1786
Convective Fluid Motion Within the Interdendritic Liquid of a Casting R. J. McdonaldJ. D. Hunt Communications Pages: 1787 - 1788
