1. Compatibility of Lead-Bismuth Eutectic with SiC-Coated Graphite at Elevated Temperature

   • Poulami Chakraborty
   • Abhijit Ghosh
   • Gautam Kumar Dey

   Communication 29 August 2016 Pages: 1 - 5

   

2. The Effect of “Wave Breakers” on the Magnetohydrodynamic Instability in Aluminum Reduction Cells

   • Alex Pedcenko
   • Sergei Molokov
   • Benoit Bardet

   Communication 04 November 2016 Pages: 6 - 10

   

3. Effect of Ce₂O₃ on Structure, Viscosity, and Crystalline Phase of CaO-Al₂O₃-Li₂O-Ce₂O₃ Slags

   • Jie Qi
   • Chengjun Liu
   • Maofa Jiang

   Communication 14 November 2016 Pages: 11 - 16

   

4. Mixing and Residence Time Distribution in an Inert Gas-Shrouded Tundish

   • Saikat Chatterjee
   • Amjad Asad
   • Kinnor Chattopadhyay

   Communication 01 December 2016 Pages: 17 - 21

   

5. Synergistic Separation Behavior of Boron in Metallurgical Grade Silicon Using a Combined Slagging and Gas Blowing Refining Technique

   • Jijun Wu
   • Yeqiang Zhou
   • Bin Yang

   Communication 28 November 2016 Pages: 22 - 26

   

6. Foreword

   • Arthur Pelton

   EditorialNotes 02 December 2016 Pages: 27 - 27

7. A Kinetic Ladle Furnace Process Simulation Model: Effective Equilibrium Reaction Zone Model Using FactSage Macro Processing

   • Marie-Aline Van Ende
   • In-Ho Jung

   OriginalPaper 26 May 2016 Pages: 28 - 36

   

8. Modeling Manganese Silicate Inclusion Composition Changes during Ladle Treatment Using FactSage Macros

   • Stephano P.T. Piva
   • Deepoo Kumar
   • P. Chris Pistorius

   OriginalPaper 26 July 2016 Pages: 37 - 45

   

9. Refractory–Slag–Metal–Inclusion Multiphase Reactions Modeling Using Computational Thermodynamics: Kinetic Model for Prediction of Inclusion Evolution in Molten Steel

   • Jae Hong Shin
   • Yongsug Chung
   • Joo Hyun Park

   OriginalPaper 28 June 2016 Pages: 46 - 59

   

10. Experimental Investigation and Thermodynamic Modeling of the B₂O₃-FeO-Fe₂O₃-Nd₂O₃ System for Recycling of NdFeB Magnet Scrap

    • Lars Klemet Jakobsson
    • Gabriella Tranell
    • In-Ho Jung

    OriginalPaper Open access 21 July 2016 Pages: 60 - 72

    

11. Application of Thermodynamic Calculations to the Pyro-refining Process for Production of High Purity Bismuth

    • Mohammad Mezbahul-Islam
    • Frederic Belanger
    • Pascal Coursol

    OriginalPaper 18 April 2016 Pages: 73 - 90

    

12. MTDATA and the Prediction of Phase Equilibria in Oxide Systems: 30 Years of Industrial Collaboration

    • John Gisby
    • Pekka Taskinen
    • Jim Robinson

    OriginalPaper 20 September 2016 Pages: 91 - 98

    

13. A Dynamic Flux Dissolution Model for Oxygen Steelmaking

    • Ameya Kadrolkar
    • Nils Å. I. Andersson
    • Neslihan Dogan

    Symposium 18 August 2016 Pages: 99 - 112

    

14. Rapid Dissolution of Quicklime into Molten Slag by Internally Formed Gas

    • Nobuhiro Maruoka
    • Hiroshi Nogami

    OriginalPaper 07 July 2016 Pages: 113 - 118

    

15. Thermodynamic and Experimental Investigations of High-Temperature Refractory Corrosion by Molten Slags

    • Christoph Wagner
    • Christine Wenzl
    • Holger Schnideritsch

    Symposium 01 December 2016 Pages: 119 - 131

    

16. Use of Thermodynamic Modeling for Selection of Electrolyte for Electrorefining of Magnesium from Aluminum Alloy Melts

    • Adam J. Gesing
    • Subodh K. Das

    OriginalPaper 23 June 2016 Pages: 132 - 145

    

17. Simultaneous Modification of Alumina and MgO·Al₂O₃ Inclusions by Calcium Treatment During Electroslag Remelting of Stainless Tool Steel

    • Cheng-Bin Shi
    • Wen-Tao Yu
    • Min Jiang

    OriginalPaper 29 August 2016 Pages: 146 - 161

    

18. Large Eddy Simulations of the Effects of EMBr and SEN Submergence Depth on Turbulent Flow in the Mold Region of a Steel Caster

    • Kai Jin
    • Surya P. Vanka
    • Brian G. Thomas

    OriginalPaper 09 September 2016 Pages: 162 - 178

    

19. Novel Approach for the Reduction of ZnO and MgO Using a Direct Diode-Laser

    • M. S. Mahmoud
    • T. Yabe
    • E. Iida

    OriginalPaper 06 October 2016 Pages: 179 - 186

    

20. Improvement of Castability and Surface Quality of Continuously Cast TWIP Slabs by Molten Mold Flux Feeding Technology

    • Jung-Wook Cho
    • Shin Yoo
    • Ki-Hyeon Moon

    OriginalPaper 24 October 2016 Pages: 187 - 196

    

21. Effect of Fluid Bypassing on the Experimentally Obtained Darcy and Non-Darcy Permeability Parameters of Ceramic Foam Filters

    • Shahin Akbarnejad
    • Mohsen Saffari Pour
    • Pӓr Göran Jönsson

    OriginalPaper Open access 08 November 2016 Pages: 197 - 207

    

22. Potential of an Al-Ti-MgAl₂O₄ Master Alloy and Ultrasonic Cavitation in the Grain Refinement of a Cast Aluminum Alloy

    • V. M. Sreekumar
    • N. H. Babu
    • D. G. Eskin

    OriginalPaper Open access 24 October 2016 Pages: 208 - 219

    

23. Study of the Viscosity of Mold Flux Based on the Vogel–Fulcher–Tammann (VFT) Model

    • Lejun Zhou
    • Wanlin Wang

    OriginalPaper 17 October 2016 Pages: 220 - 226

    

24. Comparison of the Electrochemical Behavior of Ti and Nanostructured Ti-Coated AISI 304 Stainless Steel in Strongly Acidic Solutions

    • Farid Reza Attarzadeh
    • Hassan Elmkhah
    • Arash Fattah-Alhosseini

    OriginalPaper 14 October 2016 Pages: 227 - 236

    

25. Surface Tension and Viscosity of the Ni-Based Superalloys LEK94 and CMSX-10 Measured by the Oscillating Drop Method on Board a Parabolic Flight

    • Rainer K. Wunderlich
    • Hans-Jörg Fecht
    • Georg Lohöfer

    OriginalPaper Open access 09 November 2016 Pages: 237 - 246

    

26. Mold Simulator Study on the Initial Solidification of Molten Steel Near the Corner of Continuous Casting Mold

    • Peisheng Lyu
    • Wanlin Wang
    • Haihui Zhang

    OriginalPaper 14 November 2016 Pages: 247 - 259

    

27. A Statistics-Based Cracking Criterion of Resin-Bonded Silica Sand for Casting Process Simulation

    • Huimin Wang
    • Yan Lu
    • Alan A. Luo

    OriginalPaper 28 November 2016 Pages: 260 - 267

    

28. Thermodynamics of Phosphorus in Solvent Refining of Silicon Using Ferrosilicon Alloys

    • Leili Tafaghodi Khajavi
    • Mansoor Barati

    OriginalPaper 11 October 2016 Pages: 268 - 275

    

29. Analysis of Operational Parameters Affecting the Sulfur Content in Hot Metal of the COREX Process

    • Shengli Wu
    • Laixin Wang
    • Jiacong Zhang

    OriginalPaper 11 October 2016 Pages: 276 - 285

    

30. Facile Synthesis of Nb₃Sn Via a Hydrogen Reduction Process

    • Jun Zhu
    • Shuqiang Jiao
    • Hongmin Zhu

    OriginalPaper 09 September 2016 Pages: 286 - 293

    

31. Selective Removal of Iron from Low-Grade Ti Ore by Reacting with Calcium Chloride

    • Jungshin Kang
    • Toru H. Okabe

    OriginalPaper 27 September 2016 Pages: 294 - 301

    

32. Dependence of Reduction Behaviors on the Molar Ratio of Fe₂TiO₅ and MgTi₂O₅ in the Pseudobrookite-Karrooite

    • Gengyu Zhang
    • Chao Lei
    • Chuanlin Fan

    OriginalPaper 21 October 2016 Pages: 302 - 307

    

33. Distribution of Calcium and Aluminum Between Molten Silicon and Silica-Rich CaO-Al₂O₃-SiO₂ Slags at 1823 K (1550 °C)

    • Seung Hwan Ahn
    • Lars Klemet Jakobsson
    • Gabriella Tranell

    OriginalPaper Open access 20 October 2016 Pages: 308 - 316

    

34. Thermodynamics of Palladium (Pd) and Tantalum (Ta) Relevant to Secondary Copper Smelting

    • M. A. H. Shuva
    • M. A. Rhamdhani
    • M. A. Reuter

    OriginalPaper 21 October 2016 Pages: 317 - 327

    

35. Effect of Chlorine on the Viscosities and Structures of CaO-SiO₂-CaCl₂ Slags

    • Cui Wang
    • Jianliang Zhang
    • Kuochih Chou

    OriginalPaper 28 October 2016 Pages: 328 - 334

    

36. Recovery of Nickel from Nickel-Based Superalloy Scraps by Utilizing Molten Zinc

    • Ryohei Yagi
    • Toru H. Okabe

    OriginalPaper 28 November 2016 Pages: 335 - 345

    

37. Viscosity Measurement and Structure Analysis of Cr₂O₃-Bearing CaO-SiO₂-MgO-Al₂O₃ Slags

    • Qiuhan Li
    • Jintao Gao
    • Zhancheng Guo

    OriginalPaper 30 November 2016 Pages: 346 - 356

    

38. Novel Approach for Modeling of Nonuniform Slag Layers and Air Gap in Continuous Casting Mold

    • Xudong Wang
    • Lingwei Kong
    • Xiaobing Zhang

    Technical Publication 17 October 2016 Pages: 357 - 366

    

39. Modern Aspects of Liquid Metal Engineering

    • Frank Czerwinski

    OriginalPaper 17 October 2016 Pages: 367 - 393

    

40. Effect of Primary Dendrite Orientation on Stray Grain Formation in Cross-Section Change Region During the Directional Solidification of Ni-Based Superalloy

    • Weidong Xuan
    • Chuantao Li
    • Guanghui Cao

    OriginalPaper 25 October 2016 Pages: 394 - 405

    

41. Optimization of Melt Treatment for Austenitic Steel Grain Refinement

    • Simon N. Lekakh
    • Jun Ge
    • Jessica R. TerBush

    OriginalPaper 12 October 2016 Pages: 406 - 419

    

42. Removal of Phosphorus in Silicon by the Formation of CaAl₂Si₂ Phase at the Solidification Interface

    • Liyuan Sun
    • Zhi Wang
    • Guoyu Qian

    OriginalPaper 02 November 2016 Pages: 420 - 428

    

43. Three-Dimensional CFD Simulation Coupled with Thermal Contraction in Direct-Chill Casting of A390 Aluminum Alloy Hollow Billet

    • Kesheng Zuo
    • Haitao Zhang
    • Qingzhang Chen

    OriginalPaper 23 November 2016 Pages: 429 - 443

    

44. Center Segregation with Final Electromagnetic Stirring in Billet Continuous Casting Process

    • Dongbin Jiang
    • Miaoyong Zhu

    OriginalPaper 28 November 2016 Pages: 444 - 455

    

45. LBM-LES Simulation of the Transient Asymmetric Flow and Free Surface Fluctuations under Steady Operating Conditions of Slab Continuous Casting Process

    • Peng Zhao
    • Qiang Li
    • Zongshu Zou

    OriginalPaper 13 October 2016 Pages: 456 - 470

    

46. Computational and Experimental Study of the Transient Transport Phenomena in a Full-Scale Twin-Roll Continuous Casting Machine

    • Mianguang Xu
    • Zhongyang Li
    • Miaoyong Zhu

    OriginalPaper 04 November 2016 Pages: 471 - 487

    

47. Novel Method to Prepare Magnesium by Aluminothermic Reduction of Magnesia and Calcium Hydroxide at Normal Atmosphere, 1223 K (950 °C)

    • Teng Zhang
    • Shuang-Ming Du
    • Xiao-Hu Hua

    OriginalPaper 18 October 2016 Pages: 488 - 496

    

48. Filtration Efficiency of Functionalized Ceramic Foam Filters for Aluminum Melt Filtration

    • Claudia Voigt
    • Eva Jäckel
    • Pierre Le Brun

    OriginalPaper 02 December 2016 Pages: 497 - 505

    

49. Reactions Between Liquid CaO-SiO₂ Slags and Graphite Substrates

    • Jesse F. White
    • Jaewoo Lee
    • Bjoern Glaser

    Technical Publication Open access 26 September 2016 Pages: 506 - 515

    

50. Effects of CaO/SiO₂ Ratio and Na₂O Content on Melting Properties and Viscosity of SiO₂-CaO-Al₂O₃-B₂O₃-Na₂O Mold Fluxes

    • Lin Wang
    • Chen Zhang
    • Oleg Ostrovski

    OriginalPaper 19 September 2016 Pages: 516 - 526