1. Grain boundary cracking

   • Paul G. Shewmon

   OriginalPaper Pages: 509 - 518

2. Chemical reactions between aluminum and fly ash during synthesis and reheating of Al-fly ash composite

   • R. O. Guo
   • P. K. Rohatgi

   OriginalPaper Pages: 519 - 525

3. Physicochemical and structural factors in the sulfuric acid leaching of nickel- and copper-bearing synthetic birnessites

   • Rakesh Kumar
   • S. Das

   OriginalPaper Pages: 527 - 540

4. Experimental study of phase equilibria in the systems PbO _x -CaO and PbO _x -CaO-SiO₂

   • Evgueni Jak
   • Peter C. Hayes
   • Naigang Liu

   OriginalPaper Pages: 541 - 553

5. Tellurium distribution in copper anode slimes smelting

   • D. R. Swinbourne
   • G. G. Barbante
   • A. Sheeran

   OriginalPaper Pages: 555 - 562

6. Liquid-solid mass transfer from a wall in contact with a gas/liquid interface undergoing wave motion

   • Z. D. Chen
   • J. J. J. Chen

   OriginalPaper Pages: 563 - 567

7. Mixing time and fluid flow phenomena in liquids of varying kinematic viscosities agitated by bottom gas injection

   • Manabu Iguchi
   • Kei-Ichi Nakamura
   • Ryoji Tsujino

   OriginalPaper Pages: 569 - 575

8. A thermodynamic study of Ru-Sn binary alloys

   • Ryo Kawabata
   • Munetaka Myo-Chin
   • Masanori Iwase

   OriginalPaper Pages: 577 - 581

9. Effects of CaO, Al₂O₃, and MgO additions on the copper solubility, ferric/ferrous ratio, and minor-element behavior of iron-silicate slags

   • Hang Goo Kim
   • H. Y. Sohn

   OriginalPaper Pages: 583 - 590

10. Thermodynamic modeling of liquid Fe-Ni-Cu-Co-S mattes

    • Florian Kongoli
    • Arthur D. Pelton
    • Yves Dessureault

    OriginalPaper Pages: 591 - 601

11. Investigation of mechanochemical reactions between zircon (ZrSiO₄) and alkaline earth metal oxides

    • N. J. Welham

    OriginalPaper Pages: 603 - 610

12. Modeling the microstructural changes during hot tandem rolling of AA5XXX aluminum alloys: Part I. Microstructural evolution

    • M. A. Wells
    • I. V. Samarasekera
    • D. J. Lloyd

    OriginalPaper Pages: 611 - 620

13. Modeling the microstructural changes during hot tandem rolling of AA5XXX aluminum alloys: Part II. Textural evolution

    • M. A. Wells
    • I. V. Samarasekera
    • D. J. Lloyd

    OriginalPaper Pages: 621 - 633

14. The mechanism of formation of TiB₂ particulates prepared by In Situ reaction in molten aluminum

    • B. Yang
    • Y. Q. Wang
    • B. L. Zhou

    OriginalPaper Pages: 635 - 640

15. Investigation of inclusion re-entrainment from the steel-slag interface

    • D. Bouris
    • G. Bergeles

    OriginalPaper Pages: 641 - 649

16. Model for temperature profile estimation in the refractory of a metallurgical ladle

    • T. P. Fredman
    • H. Saxén

    OriginalPaper Pages: 651 - 659

17. A computational model for the prediction of steel hardenability

    • M. Victor Li
    • David V. Niebuhr
    • David G. Atteridge

    OriginalPaper Pages: 661 - 672

18. Constrained sintering of a sphere with radial density gradient: Viscous model

    • Jie Luo
    • R. Stevens
    • Yuhe Ren

    OriginalPaper Pages: 673 - 678

19. Fluid flow in casting rigging systems: Modeling, validation, and optimal design

    • Robert M. McDavid
    • Jonathan A. Dantzig

    OriginalPaper Pages: 679 - 690

20. Simplified simulation of the transient behavior of temperatures in the upper shaft of the blast furnace

    • Henrik Saxén

    OriginalPaper Pages: 691 - 697

21. A three-dimensional model of the spray forming method

    • Hyun-Kwang Seok
    • Kyu Hwan Oh
    • Ho-In Lee

    OriginalPaper Pages: 699 - 708

22. Modeling the microstructural changes during hot tandem rolling of AA5XXX aluminum alloys: Part III. Overall model development and validation

    • M. A. Wells
    • I. V. Samarasekera
    • D. J. Lloyd

    OriginalPaper Pages: 709 - 719