Discussion of “Elastic-Plastic analysis of deformation induced by thermal stress in eutectic composites” W. R. Tyson Communication Article: 1674
Hot working of an A1-1.5 wt pet cu alloy with a preferred orientation Murray John Stewart Communication Article: 1672
Observations of an interface phase in the α/β boundaries in titanium alloys C. G. RhodesJ. C. Williams Communication Article: 1670
Influence of punch curvature on the stretching limits of sheet steel Philippe L. Charpentier Communication Article: 1665
On the influence of fracture mechanisms on fatigue crack propagation in aluminum alloys G. G. GarrettJ. F. Knott Communication Article: 1663
Discussion of “thermodynamics of β1-nizn and α-nizn phases” R. P. Anantatmula Communication Article: 1661
A technique for preparing thin foils of ti and ti alloys for transmission electron microscopy R. A. Spurling Communication Article: 1660
Interpretation of grain boundary grooving data for combined surface and volume diffusion W. M. RobertsonS. R. Srinivasan Communication Article: 1653
The age hardening characteristics of Nb-Base alloys containing carbon and/or silicon as interstitiels: Part II. (Nb-33 At. Pct Hf) N. C. BirlaM. Hoch OriginalPaper Article: 1645
The age hardening characteristics of Nb-Base alloys containing carbon and/or silicon: Part I. (Nb-15 At. Pct Hf) N. C. BirlaM. Hoch OriginalPaper Article: 1631
Metallurgical aspects in cold rolled high strength steel sheets Takashi MatsuokaKakunosuke Yamamori OriginalPaper Article: 1613
Cellular microstructure and plasticity of lead at high temperature T. H. Alden OriginalPaper Article: 1597
Fractography of fatigue crack propagation in 2024-T3 and 7075-16 aluminum alloys in air and vacuum R. J. H. Wanhill OriginalPaper Article: 1587
Observations on the growth of whisker crystals from zinc electroplate U. Lindborg OriginalPaper Article: 1581
Kinetics and hardening mechanism of the 475°C embrittlement in 18Cr-2Mo ferritic steels P. JacobssonY. BergströmB. Aronsson OriginalPaper Article: 1577
Comparative fracture toughness of an ultrafine grained Fe-Ni alloy at liquid helium temperature Sungho JinS. K. HwangJ. W. Morris OriginalPaper Article: 1569
Explosive strengthening of a Cu-Be alloy T. V. NordstromR. W. RohdeD. J. Mottern OriginalPaper Article: 1561
Non-isothermal finite diffusion-controlled growth in ternary systems E. RandichJ. I. Goldstein OriginalPaper Article: 1553
Hot workability of nimonic 115 as a function of strain rate Nils CederbladNicholas J. Grant OriginalPaper Article: 1547
High-temperature strength and ductility increases of Ti-Mo-Al alloys by step aging M. HidaS. Weissmann OriginalPaper Article: 1541
Thermal equilibria and mechanical stability of Ti3 Al phase in Ti-Mo-Al alloys T. HamajimaS. Weissmann OriginalPaper Article: 1535
Influence of heat treatment on the fatigue crack growth rates of a secondary hardening steel R. M. Horn OriginalPaper Article: 1525
An analysis of constrained deformation by slip and twinning in hexagonal close packed metals and alloys D. R. ThornburgH. R. Piehler OriginalPaper Article: 1511
Transient behavior of diffusion-induced creep and creep rupture Rishi Raj OriginalPaper Article: 1499
A short-time diffusion correlation for hydrogen-induced crack growth kinetics W. W. GerberichY. T. ChenC. ST. John OriginalPaper Article: 1485
Stress corrosion cracking of alpha brass in a tarnishing ammoniacal environment: Fractography and chemical analysis T. R. PinchbackS. P. CloughL. A. Heldt OriginalPaper Article: 1479