1. Effects of Loading Frequency, Mean Stress and Stress Amplitude on Ratchetting-Fatigue Behavior in 42CrMo Steel Under Near-Yield Stress-Controlled Condition

   • Guoying Sui
   • Zhenqiang Wang
   • Jiandong Wang

   Brief Communication 29 November 2023 Pages: 361 - 367

   

2. An In Situ Study of the Role of Pressure on Fe Recrystallization and Grain Growth During Thermomechanical Processing

   • Darren C. Pagan
   • Lukas A. Kissell
   • Matthew L. Whitaker

   Brief Communication 27 December 2023 Pages: 368 - 374

   

3. The Effect of Crystallographic Texture on the Constant-Stress, Constant-Heating-Rate Mechanical Test

   • S. L. Semiatin
   • N. C. Levkulich
   • T. M. Butler

   Original Research Article 24 December 2023 Pages: 375 - 388

   

4. Microstructure Evolution and Austenitic Grain Refinement of Ti-Modified High Mn Steels During Solution Annealing Heat Treatment

   • Abhinav Karanam
   • Arnab Sarkar
   • Lukas Bichler

   Original Research Article 12 December 2023 Pages: 389 - 402

   

5. A Phase Transformation Enthalpy Parameter for Modeling Quench Hardening of Steels

   • Augustine Samuel
   • K. M. Pranesh Rao
   • K. Narayan Prabhu

   Original Research Article 01 December 2023 Pages: 403 - 428

   

6. Dynamic Grain Growth Driven by Subgrain Boundaries in an Interstitial-Free Steel During Deformation at 850 °C

   • Thomas J. Bennett IV
   • Eric M. Taleff

   Original Research Article 12 December 2023 Pages: 429 - 446

   

7. Microstructural Characterization of 70 Wt Pct WC-NiBSi Deposited by PTA-AM

   • Dylan Rose
   • Tonya Wolfe
   • Hani Henein

   Original Research Article 23 November 2023 Pages: 447 - 465

   

8. Deconstructing the Retained Austenite Stability: A Comparative Study of Two-Phase and Bulk Microstructures

   • Joshua Kumpati
   • Sk. Md. Hasan
   • Annika Borgenstam

   Original Research Article Open access 23 November 2023 Pages: 466 - 476

   

9. Study on the Evolution Behavior of Growth and Healing of Residual Pores in Cross Wedge Rolling of Sintered Ti–6Al–4V Alloy

   • Junling Li
   • Hang Sun
   • Chaoyang Sun

   Original Research Article 28 November 2023 Pages: 477 - 490

   

10. Kinetic Effect-Dependent Seaweed Formation in Single-Crystal Al-2 Wt Pct Si Alloy by Laser Surface Remelting

    • Yumin Wang
    • Shuangming Li
    • Hui Xing

    Original Research Article 07 December 2023 Pages: 491 - 499

    

11. Tilting Dynamics and Parameter Dependence of the Dendrite Array Under a Transverse Magnetic Field: A Unified Magnetic Field-Based Phase-Field Study

    • Congjiang Zhang
    • Hongbin Yu
    • Ang Zhang

    Original Research Article 07 December 2023 Pages: 500 - 512

    

12. Metallurgical and Mechanical Investigation on Single-Step Quenching and Partitioning Thermal Treatments on Commercial Low Alloyed 30MnV6 Steel

    • S. Barella
    • M. Belfi
    • Y. Peng

    Original Research Article Open access 01 December 2023 Pages: 513 - 522

    

13. New Route to Synthesize High-Entropy Carbide Powders by Mechanical Alloying

    • Rafał Idczak
    • Piotr Sobota
    • Adam Pikul

    Original Research Article Open access 04 December 2023 Pages: 523 - 536

    

14. Reduction of Iron Ore Pellets: A Microstructural Perspective?

    • A. Sarkar
    • V. Chavan
    • I. Samajdar

    Original Research Article 08 December 2023 Pages: 537 - 549

    

15. Strontium Effects on the Formation of Iron-Intermetallic Phases in Secondary Al–9Si–0.6Fe Alloys

    • Nagasivamuni Balasubramani
    • Michael Moodispaw
    • Alan A. Luo

    Original Research Article 04 December 2023 Pages: 550 - 568

    

16. Surface Roughness Increasing of 2205 Duplex Stainless Steel Using Ultrasonic Cavitation Process

    • F. Alkhaleel
    • S. R. Allahkaram

    Original Research Article 05 December 2023 Pages: 569 - 579

    

17. The Influence of Nominal Composition on the Microstructure, Tensile Properties, and Weldability of Cast Monel Alloys

    • Christopher J. Farnin
    • Eric N. Coker
    • John N. DuPont

    Original Research Article 15 December 2023 Pages: 580 - 597

    

18. Effect of Crystal Orientation and Crystallographic Anisotropy on Shear Band Formation During Ductile Fracture in Fe Single Crystals

    • Gaddam Shiva Kumar
    • T. Venkatesh Varma
    • Saikat Sarkar

    Original Research Article 27 December 2023 Pages: 598 - 606

    

19. Precipitate Characteristic of T91 Ferritic/Martensitic Steel During Short-Term Creep

    • Hongjun Li
    • Ming Huang
    • Sen Yang

    Original Research Article 27 December 2023 Pages: 607 - 622

    

20. Effects of B Doping and Quenching Rate on Charpy Impact Properties in AISI 4130 Steels

    • Sukjin Lee
    • Robert Cryderman
    • Don Williamson

    Original Research Article 28 December 2023 Pages: 623 - 634

    

21. Autogenous Dissimilar Welding of Copper-to-Stainless Steel via Electron Beam Welding: A Novel Strategy for Achieving Defect-Free Joints

    • A. N. Siddiquee
    • N. Z. Khan
    • D. L. Chen

    Original Research Article 28 December 2023 Pages: 635 - 651

    

22. Complementary Shear Banding During Warm Rolling of Alloy 625 Leads to Uncharacteristic Development of γ-Fiber Texture

    • Ashwin Kumar Godasu
    • Sumeet Mishra
    • Suhrit Mula

    Original Research Article 28 December 2023 Pages: 652 - 673

    

23. Experimental Investigation and Thermodynamic Description of the Co–Mo–Nb System

    • Yu Shi
    • Cuiping Guo
    • Zhenmin Du

    Original Research Article 29 December 2023 Pages: 674 - 694

    

24. Effect of Niobium Microalloying on the Mechanical Properties in Grade R4 Mooring Chain Steel

    • Liang Qiu
    • Junru Li
    • Guojun Mei

    Original Research Article 29 December 2023 Pages: 695 - 705

    

25. Publisher Correction: Reduction of Iron Ore Pellets: A Microstructural Perspective?

    • A. Sarkar
    • V. Chavan
    • I. Samajdar

    Publisher Correction 19 December 2023 Pages: 706 - 706