1. A Novel Metastable Structure in Polycrystalline Metals With Extremely Fine Grains: Schwarz Crystal

   • K. Lu

   Institute of Metals Lecture/Robert Franklin Mehl Award 26 October 2023 Pages: 1 - 19

   

2. On the Incompatibility of Steady-State Assumption and Abnormal Grain Growth in the Presence of Homogenous Pinning

   • Yanchi Chen
   • Yidan Chen
   • Haowei Wang

   Brief Communication 18 October 2023 Pages: 20 - 25

   

3. Manipulating Retained Austenite Fraction and Stability With Controlled Chemical Heterogeneities in Q&P Steels

   • Melissa Thrun
   • Amy Clarke
   • Kester Clarke

   Brief Communication 26 October 2023 Pages: 26 - 30

   

4. Formation Mechanism and Evolution Behavior of the Soft Zone in Grade 91 Steel Weldment During Postweld Heat Treatment

   • Zhengman Gu
   • Yang Shen
   • Cong Wang

   Brief Communication 26 October 2023 Pages: 31 - 37

   

5. Microstructural Stability and Evolution in a New Polycrystalline Ni-Base Superalloy

   • G. J. Wise
   • N. L. Church
   • H. J. Stone

   Original Research Article Open access 13 November 2023 Pages: 38 - 53

   

6. Modeling Phase Selection and Extended Solubility in Rapid Solidified Alloys

   • Azeez Akinbo
   • Yijia Gu

   Original Research Article 16 October 2023 Pages: 54 - 62

   

7. Near-Surface Layer Perforations as Precursors to Fracture in Accumulative Roll Bonding of a Multilayered Metal Composite

   • L. V. Semenchenko
   • R. M. Mier
   • M. J. Demkowicz

   Original Research Article 22 October 2023 Pages: 63 - 72

   

8. Phenomenological Modeling of Deformation-Induced Martensite Transformation Kinetics in Austenitic Stainless Steels

   • Wen Zhang
   • Qide Zheng
   • Zhen Zhao

   Original Research Article 25 October 2023 Pages: 73 - 92

   

9. On the Evolution of Austenite During Tempering in High-Carbon High-Silicon Bearing Steel by High Energy X-Ray Diffraction

   • G. G. Ribamar
   • G. Miyamoto
   • H. Goldenstein

   Original Research Article 18 October 2023 Pages: 93 - 100

   

10. Tailoring the Microstructure and Properties of Reinforced FeMnAlC Composites by In-Situ TiB₂–TiC–M₂B Formation

    • André L. Vidilli
    • Francisco G. Coury
    • Claudemiro Bolfarini

    Original Research Article 18 October 2023 Pages: 101 - 117

    

11. Influence of Volume Fractions and Boundary Conditions on the Predicted Effective Properties of Al/Ni Composites for Industrial Design

    • Shi Yuanwu
    • Amir Hossein Assari
    • Duan Ran

    Original Research Article 01 November 2023 Pages: 118 - 133

    

12. Phenomenological Analysis of Surface Degradation of Metallic Materials in Extreme Environment

    • Simon N. Lekakh
    • Oleg Neroslavsky

    Original Research Article 26 October 2023 Pages: 134 - 143

    

13. Influences of Al Additive on Mechanical Properties of WC–Al_xFeCoCrNi Cemented Carbides

    • Donghai Zheng

    Original Research Article 18 October 2023 Pages: 144 - 149

    

14. Effect of Deformation on the Magnetic Properties of C + N Austenitic Steel

    • Laura Gabriela Torres-Mejía
    • Katherine Paredes-Gil
    • Lais Mujica-Roncery

    Original Research Article Open access 28 November 2023 Pages: 150 - 160

    

15. Manipulation of the Stacking Fault Energy of a Medium-Mn Steel Through Temperature and Hierarchical Compositional Variation

    • D. M. Field
    • D. J. Magagnosc
    • K. R. Limmer

    Original Research Article 07 November 2023 Pages: 161 - 172

    

16. High Strain Rate Superplastic Flow and Fracture Characteristics of a Fine-Grained Eutectic High Entropy Alloy

    • S. R. Reddy
    • X. Li
    • A. H. Chokshi

    Original Research Article 05 November 2023 Pages: 173 - 182

    

17. Effect of Grain Size on the Heat-Affected Zone (HAZ) Cracking Susceptibility in Ni Base XH67 Superalloy

    • Rishabh Shrivastava
    • Ravi Ranjan Kumar
    • S. V. S. Narayana Murty

    Original Research Article 03 November 2023 Pages: 183 - 197

    

18. The Combined Effects of Plastic Deformation and Two-Phase Annealing, Applied to Hot-Rolled Bands, on the Final Microstructure and Magnetic Properties of Non-oriented Electrical Steel Sheets

    • M. G. Hernández
    • F. Hernández
    • E. J. Gutiérrez

    Original Research Article 22 November 2023 Pages: 198 - 208

    

19. Influence of Austempering Conditions on Hardness and Microstructure of Bainite in Low-Alloyed Steel

    • Adam Ståhlkrantz
    • Peter Hedström
    • Annika Borgenstam

    Original Research Article Open access 13 November 2023 Pages: 209 - 217

    

20. Phase Selection and Microstructure Evolution in Laser Additive Manufactured Ni-Based Hardfacing Alloy Bush

    • S. Haribabu
    • C. Sudha
    • K. S. Bindra

    Original Research Article 05 November 2023 Pages: 218 - 231

    

21. The Effect of Texture on the Hall-Petch Relationship in Severely Drawn Ni-Co Microwires

    • Girish Bojjawar
    • Satyam Suwas
    • Atul H. Chokshi

    Original Research Article 16 November 2023 Pages: 232 - 246

    

22. Effect of Nb Precipitates and Reversed Austenite Formed by QLT Process on Microstructure and Mechanical Properties of Nb-Bearing 7Ni Cryogenic Steel

    • Enmao Wang
    • Chao Ding
    • Gang Niu

    Original Research Article 10 November 2023 Pages: 247 - 260

    

23. Insight to Potential of TiB₂ and CeO₂ Inoculants on Microstructural Evolution in Laser Powder Bed Fusion Processed Superalloy IN718

    • I-Ting Ho
    • Dhruv Tiparti
    • Sammy Tin

    Original Research Article 20 November 2023 Pages: 261 - 277

    

24. High-Strength Dissimilar Welds Between a NiTi Shape Memory Alloy and Titanium Obtained by Intermixing Niobium Using Pulsed Laser Beam Welding

    • M. Wiegand
    • N. Sommer
    • S. Böhm

    Original Research Article Open access 17 November 2023 Pages: 278 - 290

    

25. Modeling the Effect of Excess Vacancies on Precipitation and Mechanical Properties of Al–Mg–Si Alloys

    • Ole Runar Myhr
    • Calin Daniel Marioara
    • Olaf Engler

    Original Research Article Open access 22 November 2023 Pages: 291 - 302

    

26. Effect of High-Energy Ball Milling in Toluene on the Morphology, Phase Evolution, and Contamination for Some Elemental Powders

    • Kishore Kumar Behera
    • K. G. Pradeep
    • Srinivasa Rao Bakshi

    Original Research Article 16 November 2023 Pages: 303 - 319

    

27. Machine-Learning-Assisted Development of Carbon Steel With Superior Strength and Ductility Manufactured by Electron Beam Powder Bed Fusion

    • Yunwei Gui
    • Kenta Aoyagi
    • Akihiko Chiba

    Original Research Article Open access 16 November 2023 Pages: 320 - 334

    

28. The Influence of δ-Phase on the Environmentally Assisted Cracking Resistance of an Additively Manufactured Nickel-Based Superalloy

    • M. R. Stoudt
    • R. E. Ricker

    Original Research Article 22 November 2023 Pages: 335 - 351

    

29. Electrodeposition of Ni-W/PTFE Nanocomposite Coating and Investigation of Its Corrosion Resistance and Microhardness

    • Mehdi Abdolmaleki
    • Katayon Ghamari
    • Amir Hassan Shafi Farhood

    Original Research Article 19 November 2023 Pages: 352 - 359

    

30. Correction: Modeling Phase Selection and Extended Solubility in Rapid Solidified Alloys

    • Azeez Akinbo
    • Yijia Gu

    Correction 29 October 2023 Pages: 360 - 360