1. Determination of Activation Energy and Prediction of Long-Term Strength of Creep Rupture for Alloy Inconel 740/740H: A Method Based on a New Tensile Creep Rupture Model

   • L. Chen
   • Z. Dong
   • Z. D. Xiang

   Brief Communication 29 October 2021 Pages: 1 - 5

   

2. Stress and Deformation During Solidification of Amorphous Alloys Causes Microstructural Inhomogeneity

   • C. Y. Zhang
   • G. Yuan
   • G. D. Wang

   Brief Communication 09 November 2021 Pages: 6 - 11

   

3. Gradient Microstructure Induced Synergetic Strengthening in Strain-Softening Zn Alloy

   • Wei Zhang
   • Yan Du
   • Jiang-Jiang Hu

   Brief Communication 29 October 2021 Pages: 12 - 17

   

4. Application of Electron Beam Welding Technique for Joining Ultrafine-Grained Aluminum Plates

   • Marta Orłowska
   • Florian Pixner
   • Małgorzata Lewandowska

   Brief Communication Open access 10 November 2021 Pages: 18 - 24

   

5. Addition of Nickel by the Watts Bath as a Way to Correct the Phase Balance on Nd:YAG Pulsed-Laser-Welded UNS S32750

   • Eli J. da Cruz Junior
   • Bruna B. Seloto
   • Andrea Zambon

   Brief Communication 06 November 2021 Pages: 25 - 28

   

6. The Effect of Grain Boundary Carbides on Dynamic Recrystallization During Hot Compression of Ni-Based Superalloy Haynes \(282^{\mathrm{TM}}\)

   • Emil Eriksson
   • Joel Andersson
   • Magnus Hörnqvist Colliander

   Brief Communication Open access 15 November 2021 Pages: 29 - 38

   

7. Effect of Stress on Spinodal Decomposition in Binary Alloys: Atomistic Modeling and Atom Probe Tomography

   • Alexander Dahlström
   • Frederic Danoix
   • Helena Zapolsky

   Original Research Article Open access 29 October 2021 Pages: 39 - 49

   

8. Numerical Modeling of the Complex Link Between Grain Refinement and Microsegregation in Binary Alloy Solidification

   • M. H. Daneshifar
   • M. A. Jabbareh

   Original Research Article 05 November 2021 Pages: 50 - 62

   

9. The Effects of Deformation Conditions and Microstructural Features on Typical Textures of a Non-oriented Electrical Steel in Electrically Assisted Forming

   • Ben Ye
   • Lixin Li

   Original Research Article 03 November 2021 Pages: 63 - 73

   

10. Effect of Gas Pressure on Hydrogen Environment Embrittlement of Carbon Steel A106 in Carbon Monoxide Mixed Hydrogen Gas

    • Ryosuke Komoda
    • Masanobu Kubota
    • Akihide Nagao

    Original Research Article 06 November 2021 Pages: 74 - 85

    

11. Porous Surface State Analysis of Anodized Titanium for Biomedical Applications

    • J. Jakubowicz
    • G. Adamek
    • L. Smardz

    Original Research Article Open access 08 November 2021 Pages: 86 - 94

    

12. Effect of Prior Deformation Above M_d Temperature on Tensile Properties of Type 304 Metastable Austenitic Stainless Steel

    • C. Teena Mouni
    • C. Ravishankar
    • Pradyumna Kumar Parida

    Original Research Article 08 November 2021 Pages: 95 - 106

    

13. Experimental Determination of Phase Equilibria in the Ni–Hf–Ta System at 950 °C and 1100 °C

    • Dawei Wei
    • Cuiping Guo
    • Zhenmin Du

    Original Research Article 31 October 2021 Pages: 107 - 125

    

14. On the Inability of the Moving Interface Model to Predict Isothermal Solidification Time During Transient Liquid Phase (TLP) Bonding of Ni-Based Superalloys

    • Majid Pouranvari
    • Ali Ghasemi
    • Armin Salmasi

    Original Research Article 07 November 2021 Pages: 126 - 135

    

15. Intermetallic Growth at the Interfaces Between Zn₄Sb₃ Thermoelectric Material and Various Metallic Electrodes

    • Chun-Hao Chen
    • Pei-Ing Lee
    • Tung-Han Chuang

    Original Research Article 29 October 2021 Pages: 136 - 146

    

16. Oxidation Resistance and Evolution of Multi-layered Oxide Scale During Isothermal and Cyclic Exposure of ZrB₂–SiC–LaB₆ Composites at 1300 °C to 1500 °C

    • Sunil Kumar Kashyap
    • Kasturi Sala
    • Rahul Mitra

    Original Research Article 06 November 2021 Pages: 147 - 171

    

17. Effects of the Severe Plastic Deformation on the Magnetic Properties of Zr₁₃Co₈₇ Ribbons

    • B. Popescu
    • P. Palade
    • F. Tolea

    Original Research Article 17 November 2021 Pages: 172 - 178

    

18. Dry Sliding Wear Test on Borided AISI 1018 Steel Under Pin-on-Disc Configuration

    • A. Sánchez-Islas
    • J. Martínez-Trinidad
    • R. A. García-León

    Original Research Article 14 November 2021 Pages: 179 - 199

    

19. Microstructural Analysis of Cadmium Whiskers on Long-Term-Used Hardware

    • Rachel White
    • Zahra Ghanbari
    • Daniel Perry

    Original Research Article 16 November 2021 Pages: 200 - 210

    

20. Effect of Powder Recycling on Environment-Assisted Fracture of Inconel 718 Alloy Fabricated by Laser Powder Bed Fusion

    • Soyoung Kim
    • Masahiro Goto
    • Sangshik Kim

    Original Research Article 08 November 2021 Pages: 211 - 224

    

21. Surface Properties and Mechanical Performance of Ti-Based Dental Materials: Comparative Effect of Valve Alloying Elements and Structural Defects

    • Agata Sotniczuk
    • Kamil Majchrowicz
    • Halina Garbacz

    Original Research Article Open access 15 November 2021 Pages: 225 - 239

    

22. Nanostructuring of Nb-Si-Cr Alloys by Electron Beam Melting to Improve the Mechanical Properties and the Oxidation Behavior

    • A. Förner
    • J. Vollhüter
    • M. Göken

    Original Research Article Open access 13 November 2021 Pages: 240 - 249

    

23. A High-Throughput Method to Define Additive Manufacturing Process Parameters: Application to Haynes 282

    • Zahabul Islam
    • Ankur Kumar Agrawal
    • Dan J. Thoma

    Original Research Article 13 November 2021 Pages: 250 - 263

    

24. Dissimilar Spot Forge-Welding of Pure Titanium TP270 and Aluminum Alloy AA6061

    • Hideki Yamagishi

    Original Research Article 15 November 2021 Pages: 264 - 276

    

25. Influence of Ti and Co/Ni Ratio on the Oxidation at 1200 °C of Chromium-Containing {Ni, Co}-Based Cast Alloys

    • Patrice Berthod
    • Synthia Annick Ozouaki Wora

    Original Research Article 12 November 2021 Pages: 277 - 289

    

26. Specimen Size Effect of Tensile Behavior of Al-4.0 wt pct Cu Alloy Sheets: Effects of Precipitates and Cyclic Predeformation

    • Y. Yan
    • T. D. Wang
    • X. W. Li

    Original Research Article 09 November 2021 Pages: 290 - 298

    

27. Microstructure and Mechanical Properties of Spark Plasma-Sintered Graphene-Reinforced Inconel 738 Low Carbon Superalloy

    • Olugbenga Ogunbiyi
    • Rotimi Sadiku
    • Juwon Fayomi

    Original Research Article 16 November 2021 Pages: 299 - 313

    

28. Revealing the Precipitation Sequence with Aging Temperature in a Non-equiatomic AlCoCrFeNi High Entropy Alloy

    • Vickey Nandal
    • Bushra Harun
    • Suresh Neelakantan

    Original Research Article 16 November 2021 Pages: 314 - 321

    

29. Effects of Ni Content on Reversible Deformation-Induced Martensitic Transformation of Fe–Mn–Cr–Si–Ni Alloy Under Uniaxial Deformation

    • Rosa Kim
    • Cheoljun Bae
    • Jongryoul Kim

    Original Research Article 13 November 2021 Pages: 322 - 330

    

30. Design and Characterization of Al–Mg–Si–Zr Alloys with Improved Laser Powder Bed Fusion Processability

    • F. Belelli
    • R. Casati
    • J. Volpp

    Original Research Article 13 November 2021 Pages: 331 - 343