1. Fundamental Understanding of the Dissolution of Oxide Film on Ti Powder and the Unique Scavenging Feature by LaB₆

   • Y. F. Yang
   • M. Qian

   Communication 27 November 2017 Pages: 1 - 6

   

2. High Entropy Alloys: Criteria for Stable Structure

   • Snehashish Tripathy
   • Gaurav Gupta
   • Sandip Ghosh Chowdhury

   Communication 07 November 2017 Pages: 7 - 17

   

3. Analysis of the Temperature and Strain-Rate Dependences of Strain Hardening

   • Johannes Kreyca
   • Ernst Kozeschnik

   Communication 16 November 2017 Pages: 18 - 21

   

4. Reverse Transformation Behavior of Ti-6Al-4V After Deformation in the Two-Phase Region

   • Baoqi Guo
   • Clodualdo Aranas Jr.
   • John J. Jonas

   Communication 15 November 2017 Pages: 22 - 27

   

5. In Situ Investigation of the Evolution of Lattice Strain and Stresses in Austenite and Martensite During Quenching and Tempering of Steel

   • M. Villa
   • F. Niessen
   • M. A. J. Somers

   OriginalPaper 07 November 2017 Pages: 28 - 40

   

6. Analysis of the Grain Size Evolution for Ferrite Formation in Fe-C-Mn Steels Using a 3D Model Under a Mixed-Mode Interface Condition

   • H. Fang
   • M. G. Mecozzi
   • N. H. van Dijk

   OriginalPaper Open access 20 November 2017 Pages: 41 - 53

   

7. Impact of Si on Microstructure and Mechanical Properties of 22MnB5 Hot Stamping Steel Treated by Quenching & Partitioning (Q&P)

   • Bernd M. Linke
   • Thomas Gerber
   • Maribel Arribas

   OriginalPaper 21 November 2017 Pages: 54 - 65

   

8. Influence of Heating Rate on Ferrite Recrystallization and Austenite Formation in Cold-Rolled Microalloyed Dual-Phase Steels

   • C. Philippot
   • M. Bellavoine
   • P. Maugis

   OriginalPaper 20 November 2017 Pages: 66 - 77

   

9. In-Situ Synchrotron X-ray Diffraction Studies on Effects of Plastic and Elastic Loading on bcc Phase Transformations of a 3rd Generation 1 GPa Advanced High Strength Steel

   • P. Eftekharimilani
   • R. M. Huizenga
   • M. J. M. Hermans

   OriginalPaper Open access 21 November 2017 Pages: 78 - 87

   

10. Bainite Transformation During Continuous Cooling: Analysis of Dilatation Data

    • Ravi Ranjan
    • Shiv Brat Singh

    OriginalPaper 22 November 2017 Pages: 88 - 93

    

11. Strain-Induced Martensitic Transformation Kinetic in Austempered Ductile Iron (ADI)

    • X. H. Li
    • P. Saal
    • M. Hofmann

    OriginalPaper 27 November 2017 Pages: 94 - 104

    

12. Oxidation-Assisted Crack Growth in Single-Crystal Superalloys during Fatigue with Compressive Holds

    • M. A. Lafata
    • L. H. Rettberg
    • T. M. Pollock

    OriginalPaper 13 November 2017 Pages: 105 - 116

    

13. Fatigue Crack Prognostics by Optical Quantification of Defect Frequency

    • K. S. Chan
    • B. D. Buckner
    • J. C. Earthman

    OriginalPaper 10 November 2017 Pages: 117 - 127

    

14. Cryogenic Mechanical Properties of Warm Multi-Pass Caliber-Rolled Fine-Grained Titanium Alloys: Ti-6Al-4V (Normal and ELI Grades) and VT14

    • Niraj Nayan
    • Gaurav Singh
    • U. Ramamurty

    OriginalPaper 21 November 2017 Pages: 128 - 146

    

15. Serrated Flow and Dynamic Strain Aging in Fe-Mn-C TWIP Steel

    • Peng Lan
    • Jiaquan Zhang

    OriginalPaper 27 November 2017 Pages: 147 - 161

    

16. The Effectiveness of Al-Si Coatings for Preventing Interfacial Reaction in Al-Mg Dissimilar Metal Welding

    • Yin Wang
    • Basem Al-Zubaidy
    • Philip B. Prangnell

    OriginalPaper Open access 11 October 2017 Pages: 162 - 176

    

17. Correlation Between Microstructure and Low-Temperature Impact Toughness of Simulated Reheated Zones in the Multi-pass Weld Metal of High-Strength Steel

    • Yongjoon Kang
    • Gitae Park
    • Changhee Lee

    OriginalPaper 07 November 2017 Pages: 177 - 186

    

18. Effects of Niobium on the Mechanical Properties and Corrosion Behavior of Simulated Weld HAZ of HSLA Steel

    • Zihao Wang
    • Junsheng Wu
    • Xiaogang Li

    OriginalPaper 07 November 2017 Pages: 187 - 197

    

19. In situ Weak Magnetic-Assisted Thermal Stress Field Reduction Effect in Laser Welding

    • Lvjie Liang
    • Shengyong Pang
    • Xin Chen

    OriginalPaper 20 November 2017 Pages: 198 - 209

    

20. High-Speed Friction Stir Welding of AA7075-T6 Sheet: Microstructure, Mechanical Properties, Micro-texture, and Thermal History

    • Jingyi Zhang
    • Piyush Upadhyay
    • David P. Field

    OriginalPaper 20 November 2017 Pages: 210 - 222

    

21. Friction Stir Welding (FSW) of Aged CuCrZr Alloy Plates

    • Kaushal Jha
    • Santosh Kumar
    • G. K. Dey

    OriginalPaper 20 November 2017 Pages: 223 - 234

    

22. Yield Strength Enhancement by Carbon Trapping in Ferrite of the Quenching and Partitioning Steel

    • P. Chen
    • G. D. Wang
    • H. L. Yi

    OriginalPaper 27 November 2017 Pages: 235 - 240

    

23. Texture Development and Material Flow Behavior During Refill Friction Stir Spot Welding of AlMgSc

    • Junjun Shen
    • Sara B. M. Lage
    • Jorge F. dos Santos

    OriginalPaper 24 October 2017 Pages: 241 - 254

    

24. Enhanced Densification of PM Steels by Liquid Phase Sintering with Boron-Containing Master Alloy

    • Maheswaran Vattur Sundaram
    • Kumar Babu Surreddi
    • Lars Nyborg

    OriginalPaper Open access 24 October 2017 Pages: 255 - 263

    

25. Development of Duplex Stainless Steels by Field-Assisted Hot Pressing: Influence of the Particle Size and Morphology of the Powders on the Final Mechanical Properties

    • A. García-Junceda
    • M. Rincón
    • J. M. Torralba

    OriginalPaper 01 November 2017 Pages: 264 - 271

    

26. Manufacturing of Open-Cell Zn-22Al-2Cu Alloy Foams by a Centrifugal-Replication Process

    • A. Sánchez
    • A. Cruz
    • V. H. Gutiérrez

    OriginalPaper 21 November 2017 Pages: 272 - 281

    

27. A Coupled Crystal Plasticity and Anisotropic Yield Function Model to Identify the Anisotropic Plastic Properties and Friction Behavior of an AA 3003 Alloy

    • Hyuk Jong Bong
    • Dohyun Leem
    • Myoung-Gyu Lee

    OriginalPaper 20 November 2017 Pages: 282 - 294

    

28. Crystallographic Orientation Dependence of Corrosion Behavior of a Single Crystal Nickel-Based Alloy

    • L. N. Zhang
    • O. A. Ojo

    OriginalPaper 27 November 2017 Pages: 295 - 304

    

29. Design of Novel Precipitate-Strengthened Al-Co-Cr-Fe-Nb-Ni High-Entropy Superalloys

    • Stoichko Antonov
    • Martin Detrois
    • Sammy Tin

    OriginalPaper 16 November 2017 Pages: 305 - 320

    

30. The Influence of Strain Path on Rare Earth Recrystallization Textures in a Magnesium-Zinc-Rare Earth Alloy

    • D. Griffiths
    • B. Davis
    • J. D. Robson

    OriginalPaper Open access 22 November 2017 Pages: 321 - 332

    

31. A Novel Approach to Enhance the Mechanical Strength and Electrical and Thermal Conductivity of Cu-GNP Nanocomposites

    • Abdollah Saboori
    • Matteo Pavese
    • Paolo Fino

    OriginalPaper 21 November 2017 Pages: 333 - 345

    

32. The Influence of a TiN Film on the Electronic Contribution to the Thermal Conductivity of a TiC Film in a TiN-TiC Layer System

    • K. Jagannadham

    OriginalPaper 16 November 2017 Pages: 346 - 355

    

33. Stress Corrosion Behavior of Low-temperature Liquid-Nitrided 316 Austenitic Stainless Steel in a Sour Environment

    • Xiangfeng Zhang
    • Jun Wang
    • Danqi Wang

    OriginalPaper 24 October 2017 Pages: 356 - 367

    

34. Sodium Aluminate Concentration Effects on Microstructure and Corrosion Behavior of the Plasma Electrolytic Oxidation Coatings on Pure Titanium

    • Maryam Molaei
    • Arash Fattah-Alhosseini
    • Seyed Omid Gashti

    OriginalPaper 16 November 2017 Pages: 368 - 375

    

35. Hydrogen Storage Performances of REMg₁₁Ni (RE = Sm, Y) Alloys Prepared by Mechanical Milling

    • Yanghuan Zhang
    • Songsong Cui
    • Shihai Guo

    OriginalPaper 20 November 2017 Pages: 376 - 384

    

36. Critical Phenomena and Estimation of Spontaneous Magnetization by Magnetic Entropy Analysis of La_0.7Sr_0.3Mn_0.94Cu_0.06O₃

    • P. T. Phong
    • L. T. T. Ngan
    • In-Ja Lee

    OriginalPaper 20 November 2017 Pages: 385 - 394

    

37. Characterization of α-Fe-Free Heteroepitaxial NdFe_12−x Ti _x Thin-Film Materials with a Novel Cubic Laves Fe₂Ti Phase

    • Jason Paul Hadorn
    • Yusuke Hirayama
    • Tadakatsu Ohkubo

    OriginalPaper 20 November 2017 Pages: 395 - 405

    

38. The Compositional Dependence of the Microstructure and Properties of CMSX-4 Superalloys

    • Hao Yu
    • Wei Xu
    • Sybrand Van Der Zwaag

    OriginalPaper Open access 14 November 2017 Pages: 406 - 416

    

39. Modeling of Metallic Glass Matrix Composites Under Compression: Microstructure Effect on Shear Band Evolution

    • Yunpeng Jiang
    • Kun Qiu
    • Qingqing Wu

    OriginalPaper 20 November 2017 Pages: 417 - 424

    

40. Correction to: The Effect of Aging on the Microstructure of Selective Laser Melted Cu-Ni-Si

    • Anthony P. Ventura
    • Christopher J. Marvel
    • Wojciech Z. Misiolek

    Correction 13 November 2017 Pages: 425 - 425