1. The Influence of Cooling Rate During Crystallization on the Effective Partitioning Coefficient in High-Entropy Alloys from Al-Ti-Co-Ni-Fe System

   • Kamil Górecki
   • Piotr Bala
   • Krzysztof Wieczerzak

   Communication 14 April 2016 Pages: 3257 - 3262

   

2. Influence of Carbide Precipitation and Dissolution on the Microstructure of Ultra-Fine-Grained Intercritically Annealed Medium Manganese Steel

   • Sangwon Lee
   • Bruno C. De Cooman

   Communication 18 April 2016 Pages: 3263 - 3270

   

3. Microstructural Evolution and Recrystallization Kinetics of a Cold-Rolled, Ferrite-Martensite Structure During Intercritical Annealing

   • S. A. Etesami
   • M. H. Enayati

   Communication 16 May 2016 Pages: 3271 - 3276

   

4. A Novel Training-Free Processed Fe-Mn-Si-Cr-Ni Shape Memory Alloy Undergoing δ → γ Phase Transformation

   • Huabei Peng
   • Gaixia Wang
   • Yuhua Wen

   Communication 29 April 2016 Pages: 3277 - 3283

   

5. Thermodynamic Calculation Study on Effect of Manganese on Stability of Austenite in High Nitrogen Stainless Steels

   • Qingchuan Wang
   • Bingchun Zhang
   • Ke Yang

   Communication 03 May 2016 Pages: 3284 - 3288

   

6. Creep Behavior at 1273 K (1000 °C) in Nb-Bearing Austenitic Heat-Resistant Cast Steels Developed for Exhaust Component Applications

   • Yinhui Zhang
   • Mei Li
   • Qiang Feng

   Communication 05 May 2016 Pages: 3289 - 3294

   

7. A New Relationship Among Self- and Impurity Diffusion Coefficients in Binary Solution Phases

   • Jinghua Xin
   • Yong Du
   • Zikui Liu

   Communication 02 May 2016 Pages: 3295 - 3299

   

8. Discussion of “Normal Spectral Emissivity Measurement of Liquid Iron and Nickel Using Electromagnetic Levitation in Direct Current Magnetic Field.”

   • Kyle J. Daun

   OriginalPaper 29 April 2016 Pages: 3300 - 3302

   

9. Amendments to the Discussion on the Paper Entitled “Normal Spectral Emissivity Measurement of Liquid Iron and Nickel Using Electromagnetic Levitation in Direct Current Magnetic Field”

   • Hidekazu Kobatake
   • Hiroyuki Fukuyama

   Communication 02 May 2016 Pages: 3303 - 3304

   

10. Foreword

    Symposium: High Entropy Alloys III 25 April 2016 Pages: 3305 - 3305

11. Entropy and Diffuse Scattering: Comparison of NbTiVZr and CrMoNbV

    • Michael Widom

    Symposium: High Entropy Alloys III 10 September 2015 Pages: 3306 - 3311

    

12. Tribological Properties of AlCrCuFeNi₂ High-Entropy Alloy in Different Conditions

    • Yong Liu
    • Shengguo Ma
    • Junwei Qiao

    Symposium: High Entropy Alloys III 22 February 2016 Pages: 3312 - 3321

    

13. High-Entropy Alloys in Hexagonal Close-Packed Structure

    • M. C. Gao
    • B. Zhang
    • J. A. Hawk

    Symposium: High Entropy Alloys III 28 August 2015 Pages: 3322 - 3332

    

14. Senary Refractory High-Entropy Alloy HfNbTaTiVZr

    • M. C. Gao
    • B. Zhang
    • S. M. Guo

    Symposium: High Entropy Alloys III 03 September 2015 Pages: 3333 - 3345

    

15. On the Mechanical Stability of Austenite Matrix After Martensite Formation in a Medium Mn Steel

    • B. B. He
    • M. X. Huang

    OriginalPaper 25 April 2016 Pages: 3346 - 3353

    

16. Effect of Mg Content on the Microstructure and Toughness of Heat-Affected Zone of Steel Plate after High Heat Input Welding

    • Long-Yun Xu
    • Jian Yang
    • Wan-Lin Wang

    OriginalPaper 02 May 2016 Pages: 3354 - 3364

    

17. The Effects of Austenitizing Conditions on the Microstructure and Wear Resistance of a Centrifugally Cast High-Speed Steel Roll

    • Minwoo Kang
    • Young-Kook Lee

    OriginalPaper 29 April 2016 Pages: 3365 - 3374

    

18. Mechanism of Austenite Formation from Spheroidized Microstructure in an Intermediate Fe-0.1C-3.5Mn Steel

    • Qingquan Lai
    • Mohamed Gouné
    • Yves Bréchet

    OriginalPaper 04 May 2016 Pages: 3375 - 3386

    

19. Effects of Solute Nb Atoms and Nb Precipitates on Isothermal Transformation Kinetics from Austenite to Ferrite

    • Li Wang
    • Sally Parker
    • Rachel Thomson

    OriginalPaper 02 May 2016 Pages: 3387 - 3396

    

20. Effect of Grain Boundary Character Distribution on the Impact Toughness of 410NiMo Weld Metal

    • M. Divya
    • C. R. Das
    • A. K. Bhaduri

    OriginalPaper 12 May 2016 Pages: 3397 - 3411

    

21. Recovery of Mechanical Properties of a 6061-T6 Aluminum Weld by Heat Treatment After Welding

    • Javier Serrano Pérez
    • Ricardo Rafael Ambriz
    • David Jaramillo Vigueras

    OriginalPaper 03 May 2016 Pages: 3412 - 3422

    

22. Mechanical Behavior and Microstructure Characteristics of Directionally Solidified TWIP Steel

    • Dan Wang
    • Kun Wang
    • Fusheng Han

    OriginalPaper 13 April 2016 Pages: 3423 - 3434

    

23. Failure Orientation in Stretch Forming and Its Correlation with a Polycrystal Plasticity-Based Material Model for a Collection of Highly Formable Sheet Steels

    • Yuguo An
    • Romke Boterman
    • Marc Scholting

    OriginalPaper 25 April 2016 Pages: 3435 - 3446

    

24. Effect of Alloying Elements in Hot-Rolled Metastable β-Titanium Alloys. Part II: Mechanical Properties

    • Premkumar Manda
    • Uday Chakkingal
    • A. K. Singh

    OriginalPaper 13 April 2016 Pages: 3447 - 3463

    

25. The Effect of Porosity on Fatigue of Die Cast AM60

    • Zhuofei Yang
    • Jidong Kang
    • David S. Wilkinson

    OriginalPaper 21 April 2016 Pages: 3464 - 3472

    

26. Ring-Constraint High-Pressure Torsion Process

    • Soo-Hyun Joo
    • Hyoung Seop Kim

    OriginalPaper 21 April 2016 Pages: 3473 - 3478

    

27. Rationalization of Creep Data of Creep-Resistant Steels on the Basis of the New Power Law Creep Equation

    • Q. Wang
    • M. Yang
    • Z. D. Xiang

    OriginalPaper 02 May 2016 Pages: 3479 - 3487

    

28. The Effect of Microstructural Variation on the Hydrogen Environment-Assisted Cracking of Monel K-500

    • Zachary D. Harris
    • Justin D. Dolph
    • James T. Burns

    OriginalPaper 20 April 2016 Pages: 3488 - 3510

    

29. Three-Dimensional Thermomechanical Simulation and Experimental Validation on Failure of Dissimilar Material Welds

    • R. Santosh
    • S. K. Das
    • M. Ghosh

    OriginalPaper 20 April 2016 Pages: 3511 - 3521

    

30. Characterization of a Friction Stir Weld in Aluminum Alloy 7055 Using Microhardness, Electrical Conductivity, and Differential Scanning Calorimetry (DSC)

    • Ralph Bush
    • Michelle Kiyota
    • Catherine Kiyota

    OriginalPaper 13 April 2016 Pages: 3522 - 3532

    

31. Process Optimization of Dual-Laser Beam Welding of Advanced Al-Li Alloys Through Hot Cracking Susceptibility Modeling

    • Yingtao Tian
    • Joseph D. Robson
    • Alexandra Karanika

    OriginalPaper Open access 20 April 2016 Pages: 3533 - 3544

    

32. Hybrid Laser-Arc Welding of 10-mm-Thick Cast Martensitic Stainless Steel CA6NM: As-Welded Microstructure and Mechanical Properties

    • Fatemeh Mirakhorli
    • Xinjin Cao
    • Jean-Luc Fihey

    OriginalPaper 28 April 2016 Pages: 3545 - 3563

    

33. Microstructural Evolution and Wear Resistance of Friction Stir-Processed AISI 52100 Steel

    • R. A. Seraj
    • A. Abdollah-zadeh
    • R. Soltanalizadeh

    OriginalPaper 13 April 2016 Pages: 3564 - 3572

    

34. The Growth Behavior of Titanium Boride Layers in α and β Phase Fields of Titanium

    • Xiaojun Lv
    • Lingyun Hu
    • Jie Li

    OriginalPaper 20 April 2016 Pages: 3573 - 3579

    

35. Designing the Color of Hot-Dip Galvanized Steel Sheet Through Destructive Light Interference Using a Zn-Ti Liquid Metallic Bath

    • Gabor Levai
    • Melinda Godzsák
    • George Kaptay

    OriginalPaper 09 May 2016 Pages: 3580 - 3596

    

36. Experimental Measurements for Numerical Simulation of Macrosegregation in a 36-Ton Steel Ingot

    • Zhenhu Duan
    • Wutao Tu
    • Baicheng Liu

    OriginalPaper 03 May 2016 Pages: 3597 - 3606

    

37. Microstructure of Hot Rolled 1.0C-1.5Cr Bearing Steel and Subsequent Spheroidization Annealing

    • Zhen-Xing Li
    • Chang-Sheng Li
    • Xue-Dong Pang

    OriginalPaper 20 April 2016 Pages: 3607 - 3621

    

38. Effect of Rolling Temperature and Ultrafast Cooling Rate on Microstructure and Mechanical Properties of Steel Plate

    • Qibin Ye
    • Zhenyu Liu
    • Guodong Wang

    OriginalPaper 20 April 2016 Pages: 3622 - 3632

    

39. Achieving Fine Beta Grain Structure in a Metastable Beta Titanium Alloy Through Multiple Forging-Annealing Cycles

    • Ahmad Zafari
    • Yunpeng Ding
    • Kenong Xia

    OriginalPaper 12 April 2016 Pages: 3633 - 3648

    

40. Effect of Vanadium on the Hot Deformation Behavior of Vanadium-Microalloyed Steel for Thin Slab Direct Rolling

    • Chang Wook Lee
    • Hwan Goo Seong
    • Bruno C. De Cooman

    OriginalPaper 21 April 2016 Pages: 3649 - 3663

    

41. Surface Integrity and Structural Stability of Broached Inconel 718 at High Temperatures

    • Z. Chen
    • R. Lin Peng
    • S. Johansson

    OriginalPaper 22 April 2016 Pages: 3664 - 3676

    

42. Structural and Magnetic Properties of Fe Films Electrodeposited on Al Substrates

    • M. Mebarki
    • A. Layadi
    • P. Pernod

    OriginalPaper 25 April 2016 Pages: 3677 - 3683

    

43. Strengthening Mechanisms and Electrochemical Behavior of Ultrafine-Grained Commercial Pure Copper Fabricated by Accumulative Roll Bonding

    • O. Imantalab
    • A. Fattah-Alhosseini
    • M. K. Keshavarz

    OriginalPaper 22 April 2016 Pages: 3684 - 3693

    

44. Induction Tempering vs Conventional Tempering of a Heat-Treatable Steel

    • Stephanie Sackl
    • Michael Zuber
    • Sophie Primig

    OriginalPaper 03 May 2016 Pages: 3694 - 3702

    

45. Influence of Processing Parameters on the Solidification Behavior of Single-Crystal CMSX-4 Superalloy

    • Fu Wang
    • Dexin Ma
    • Andreas Bührig-Polaczek

    OriginalPaper 04 May 2016 Pages: 3703 - 3712

    

46. Effects of Crack Closure and Cyclic Deformation on Thermomechanical Fatigue Crack Growth of a Near α Titanium Alloy

    • Kartik Prasad
    • Vikas Kumar
    • M. Sundararaman

    OriginalPaper 13 April 2016 Pages: 3713 - 3730

    

47. Plunger Kinematic Parameters Affecting Quality of High-Pressure Die-Cast Aluminum Alloys

    • Elena Fiorese
    • Franco Bonollo

    OriginalPaper 28 April 2016 Pages: 3731 - 3743

    

48. Single-Step Production of Nanostructured Copper-Nickel (CuNi) and Copper-Nickel-Indium (CuNiIn) Alloy Particles

    • Ramazan Oğuzhan Apaydın
    • Burçak Ebin
    • Sebahattin Gürmen

    OriginalPaper 26 April 2016 Pages: 3744 - 3752

    

49. First-Principles Study of the Geometric and Electronic Structures of Zinc Ferrite with Vacancy Defect

    • Jinhuan Yao
    • Yanwei Li
    • Xiaodong Zhu

    OriginalPaper 28 April 2016 Pages: 3753 - 3760

    

50. A Thermodynamic Approach to Predict Formation Enthalpies of Ternary Systems Based on Miedema’s Model

    • Mahbubeh Sadat Mousavi
    • Roozbeh Abbasi
    • Seyed Farshid Kashani-Bozorg

    OriginalPaper 02 May 2016 Pages: 3761 - 3770