1. Low-Temperature Toughness of the Austempered Offshore Steel

   • C. Yu
   • T. C. Yang
   • R. K. Shiue

   Communication 14 July 2016 Pages: 4777 - 4783

   

2. Damping Capacities of Mg-4 Pct Zn-(0-0.5) Pct Ca Biomedical Alloys

   • Joong-Hwan Jun
   • In-Je Hwang

   Communication 14 July 2016 Pages: 4784 - 4787

   

3. A Novel Method to Achieve Grain Refinement in Aluminum

   • Kui Wang
   • Haiyan Jiang
   • Wenjiang Ding

   Communication 26 July 2016 Pages: 4788 - 4794

   

4. Easy Glide in a Coarse-Grained Mg-2Zn-2Nd Alloy

   • Tong Wang
   • John J. Jonas
   • Stephen Yue

   Communication 01 August 2016 Pages: 4795 - 4799

   

5. Correlation Between Interfacial Structure and Toughness in SiC-Al Bilayers

   • Yaru Kong
   • Qiang Guo
   • Di Zhang

   Communication 01 August 2016 Pages: 4800 - 4805

   

6. Precipitation in Microalloyed Steel by Model Alloy Experiments and Thermodynamic Calculations

   • Karin Frisk
   • Ulrika Borggren

   OriginalPaper 21 July 2016 Pages: 4806 - 4817

   

7. Dissolution of Cu/Mg Bearing Intermetallics in Al-Si Foundry Alloys

   • Mousa Javidani
   • Daniel Larouche
   • X. Grant Chen

   OriginalPaper 01 August 2016 Pages: 4818 - 4830

   

8. Autonomous Filling of Grain-Boundary Cavities during Creep Loading in Fe-Mo Alloys

   • S. Zhang
   • H. Fang
   • N. H. van Dijk

   OriginalPaper Open access 26 July 2016 Pages: 4831 - 4844

   

9. Isothermal Reduction of Oxide Scale on Hot-Rolled, Low-Carbon Steel in 10 pct H₂-Ar

   • Yongquan He
   • Tao Jia
   • Jun Li

   OriginalPaper 04 August 2016 Pages: 4845 - 4852

   

10. Ultrahigh Ductility, High-Carbon Martensitic Steel

    • Shengwei Qin
    • Yu Liu
    • Nailu Chen

    OriginalPaper 28 July 2016 Pages: 4853 - 4861

    

11. Characterization of M₂₃C₆ Carbides Precipitating at Grain Boundaries in 100Mn13 Steel

    • Zhenfeng Xu
    • Zhimin Ding
    • Bo Liang

    OriginalPaper 12 August 2016 Pages: 4862 - 4868

    

12. Phase Transformation Behavior of Medium Manganese Steels with 3 Wt Pct Aluminum and 3 Wt Pct Silicon During Intercritical Annealing

    • Binhan Sun
    • Fateh Fazeli
    • Stephen Yue

    OriginalPaper 01 August 2016 Pages: 4869 - 4882

    

13. The Impact of Retained Austenite Characteristics on the Two-Body Abrasive Wear Behavior of Ultrahigh Strength Bainitic Steels

    • Balaji Narayanaswamy
    • Peter Hodgson
    • Hossein Beladi

    OriginalPaper 04 August 2016 Pages: 4883 - 4895

    

14. Hydrogen Permeation in Nanostructured Bainitic Steel

    • Oluwole Kazum
    • Hossein Beladi
    • M. Bobby Kannan

    OriginalPaper 27 July 2016 Pages: 4896 - 4903

    

15. A Critical Assessment of Cyclic Softening and Hardening Behavior in a Near-α Titanium Alloy During Thermomechanical Fatigue

    • Kartik Prasad
    • Rajdeep Sarkar
    • M. Sundararaman

    OriginalPaper 10 August 2016 Pages: 4904 - 4921

    

16. Microstructure and Mechanical Properties After Shock Wave Loading of Cast CrMnNi TRIP Steel

    • Ralf Eckner
    • L. Krüger
    • G. Heide

    OriginalPaper 02 August 2016 Pages: 4922 - 4932

    

17. Calorimetric Measurements of Liquid Al-Zn Alloys

    • Adam Dębski
    • Władysław Gąsior
    • Katarzyna Szmit

    OriginalPaper 20 July 2016 Pages: 4933 - 4940

    

18. Molten Al and (0001) α-Al₂O₃ Single Crystal: Interface Stability

    • Joaquin Aguilar-santillan

    OriginalPaper 02 August 2016 Pages: 4941 - 4950

    

19. Influence of Microwave and Conventional Annealing Processes in Improving an Electrodeposited Nickel Interlayer Characteristics

    • Abdelkarim Hassan
    • Mohd Yusof Noordin
    • Kurniawan Denni

    OriginalPaper 20 July 2016 Pages: 4951 - 4959

    

20. Effect of Nickel Precoating on Wettability of Twinning-Induced Plasticity Steels by Liquid Zn-0.23 Wt Pct Al

    • Yunkyum Kim
    • Joonho Lee
    • Kwang-Geun Chin

    OriginalPaper 18 July 2016 Pages: 4960 - 4969

    

21. Precipitation Modeling in Nitriding in Fe-M Binary System

    • Yusaku Tomio
    • Goro Miyamoto
    • Tadashi Furuhara

    OriginalPaper 27 July 2016 Pages: 4970 - 4978

    

22. Effect of the Solution Annealing and Chemical Passivation Followed by Aging on the Corrosion of Shell Mold Cast CF8 Stainless Steel

    • Kuk-Jin Kim
    • Heongkyu Ju
    • Sung Joon Pak

    OriginalPaper 26 July 2016 Pages: 4979 - 4982

    

23. Magnetic and Magnetocaloric Properties of High-Energy Ball-Milled Nanocrystalline CeMn₂Ge₂ Compound

    • Melike Kaya
    • Ilker Dincer
    • Yalcin Elerman

    OriginalPaper 26 July 2016 Pages: 4983 - 4987

    

24. Grain Refinement of Deoxidized Copper

    • María José Balart
    • Jayesh B. Patel
    • Zhongyun Fan

    OriginalPaper Open access 01 August 2016 Pages: 4988 - 5011

    

25. The Role of Lattice Misfit on Heterogeneous Nucleation of Pure Aluminum

    • L. Wang
    • L. Yang
    • J. G. Li

    OriginalPaper 10 August 2016 Pages: 5012 - 5022

    

26. The Effects of Grain Size and Texture on Dynamic Abnormal Grain Growth in Mo

    • Philip J. Noell
    • Eric M. Taleff

    OriginalPaper 14 July 2016 Pages: 5023 - 5036

    

27. Evolutions of Microstructure and Properties During Cold Rolling of 19Cr Duplex Stainless Steel

    • Qingxuan Ran
    • Wanjian Xu
    • Laizhu Jiang

    OriginalPaper 18 July 2016 Pages: 5037 - 5048

    

28. Effects of Heat Treatment on the Microstructure and Mechanical Properties of Low-Carbon Steel with Magnesium-Based Inclusions

    • Jian Zhang
    • Pei-Hsien Feng
    • Muh-Jung Lu

    OriginalPaper 04 August 2016 Pages: 5049 - 5057

    

29. Improvement in Abrasion Wear Resistance and Microstructural Changes with Deep Cryogenic Treatment of Austempered Ductile Cast Iron (ADI)

    • Sanja Šolić
    • Matjaž Godec
    • Črtomir Donik

    OriginalPaper 18 July 2016 Pages: 5058 - 5070

    

30. A Study on the Effect of Strain Rate on the Dynamic Recrystallization Mechanism of Alloy 617B

    • He Jiang
    • Jianxin Dong
    • Zhihao Yao

    OriginalPaper 26 July 2016 Pages: 5071 - 5087

    

31. Interaction Between the Growth and Dissolution of Intermetallic Compounds in the Interfacial Reaction Between Solid Iron and Liquid Aluminum

    • Shuhai Chen
    • Dongdong Yang
    • Xingke Zhao

    OriginalPaper 25 July 2016 Pages: 5088 - 5100

    

32. The Influence of Grain Size on Twinning and Microstructure Refinement During Cold Rolling of Commercial-Purity Titanium

    • S. V. Zherebtsov
    • G. S. Dyakonov
    • S. L. Semiatin

    OriginalPaper 04 August 2016 Pages: 5101 - 5113

    

33. FEM Analysis and Experimental Verification of the Integral Forging Process for AP1000 Primary Coolant Pipe

    • Shenglong Wang
    • Xiaoyi Yu
    • Huanchun Wu

    OriginalPaper 08 August 2016 Pages: 5114 - 5124

    

34. Synthesis of Aluminum-Aluminum Nitride Nanocomposites by Gas-Liquid Reactions I. Thermodynamic and Kinetic Considerations

    • Cecilia Borgonovo
    • Makhlouf M. Makhlouf

    OriginalPaper 27 July 2016 Pages: 5125 - 5135

    

35. Strengthening Mechanisms in Nanostructured Al/SiC_p Composite Manufactured by Accumulative Press Bonding

    • Sajjad Amirkhanlou
    • Mehdi Rahimian
    • Fernando Carreño

    OriginalPaper 29 July 2016 Pages: 5136 - 5145

    

36. Thermal Stability Study from Room Temperature to 1273 K (1000 °C) in Magnesium Silicide

    • Eleni-Chrysanthi Stefanaki
    • Euripides Hatzikraniotis
    • George S. Polymeris

    OriginalPaper 12 August 2016 Pages: 5146 - 5158

    

37. Evaluation of Cooling Rate Effects on the Mechanical Properties of Die Cast Magnesium Alloy AM60

    • P. Sharifi
    • Y. Fan
    • J. T. Wood

    OriginalPaper 10 August 2016 Pages: 5159 - 5168

    

38. Modeling the Effect of Temperature and Potential on the In Vitro Corrosion Performance of Biomedical Hydroxyapatite Coatings

    • M. İbrahim Coşkun
    • İsmail H. Karahan
    • Teresa D. Golden

    OriginalPaper 03 August 2016 Pages: 5169 - 5180

    

39. On the Origin of Grid Anisotropy in the Simulation of Dendrite Growth by a VFT Model

    • Afaf Djaraoui
    • Samia Nebti

    OriginalPaper 25 April 2016 Pages: 5181 - 5194

    

40. Experimental and Numerical Study on the Effect of ZDDP Films on Sticking During Hot Rolling of Ferritic Stainless Steel Strip

    • Liang Hao
    • Zhengyi Jiang
    • Laizhu Jiang

    OriginalPaper 01 August 2016 Pages: 5195 - 5202

    

41. On the Study of the Sheet Bendability in AA5754-O Temper Alloy

    • Y. Shi
    • H. Jin
    • D. J. Lloyd

    OriginalPaper 21 July 2016 Pages: 5203 - 5213

    

42. Study on Exploration of Azeotropic Point of Pb-Sb Alloys by Vacuum Distillation and Ab Initio Molecular Dynamic Simulation

    • Bingyi Song
    • Wenlong Jiang
    • Yongnian Dai

    OriginalPaper 25 July 2016 Pages: 5214 - 5222

    

43. Structure–Property Correlation in Fe-Al₂O₃ In Situ Nanocomposite Synthesized by High-Energy Ball Milling and Spark Plasma Sintering

    • V. Udhayabanu
    • K. R. Ravi
    • B. S. Murty

    OriginalPaper 12 July 2016 Pages: 5223 - 5233

    

44. Detection of Single-Domain Co₂FeAl Nanoparticles Using First-Order Reversal Curve Method

    • Sima Alikhanzadeh-Arani
    • Mohammad Almasi-Kashi
    • Masoud Salavati-Niasari

    OriginalPaper 21 July 2016 Pages: 5234 - 5241

    

45. Influence of Tin Additions on the Phase-Transformation Characteristics of Mechanical Alloyed Cu-Al-Ni Shape-Memory Alloy

    • Safaa N. Saud
    • E. Hamzah
    • M. N. Mohammed

    OriginalPaper 12 July 2016 Pages: 5242 - 5255

    

46. Erratum to: On the Origin of Grid Anisotropy in the Simulation of Dendrite Growth by a VFT Model

    • Afaf Djaraoui
    • Samia Nebti

    Erratum 16 June 2016 Pages: 5256 - 5256

47. Erratum to: Nucleation and Growth of Graphite in Eutectic Spheroidal Cast Iron: Modeling and Testing

    • Fernando D. Carazo
    • Patricia M. Dardati
    • Luis A. Godoy

    Erratum 25 July 2016 Pages: 5257 - 5258