1. Anisotropy in Thermal Expansion of Bainitic Ferrite

   • R. K. Dutta
   • R. M. Huizenga
   • I. M. Richardson

   Communication 04 September 2014 Pages: 5281 - 5285

   

2. Effect of Carbon on Microstructure and Mechanical Properties of Low C-1.6 pct Mn-0.1 pct Cr-0.3 pct Mo-0.0005 pct B Dual-Phase Steels

   • W. C. Jeong

   Communication 28 August 2014 Pages: 5286 - 5289

   

3. Effects of Pre-tempering on Intercritical Annealing in Fe-2Mn-0.3C Alloy

   • Zhen-Qing Liu
   • Goro Miyamoto
   • Tadashi Furuhara

   Communication 20 August 2014 Pages: 5290 - 5294

   

4. Correlation Between MnS Precipitation, Sulfur Segregation Kinetics, and Hot Ductility in C-Mn Steel

   • M. H. Kang
   • J. S. Lee
   • N. H. Heo

   Communication 29 August 2014 Pages: 5295 - 5299

   

5. Enhanced Strength and Ductility in an Ultrafine-Grained Fe-22Mn-0.6C Austenitic Steel Having Fully Recrystallized Structure

   • Y. Z. Tian
   • Y. Bai
   • N. Tsuji

   Communication 12 September 2014 Pages: 5300 - 5304

   

6. Discussion of “On the Refinement Mechanism of Silicon in Al-Si-Cu-Zn Alloy with Addition of Bismuth”*

   • John Campbell

   Discussion 19 August 2014 Pages: 5305 - 5305

7. Authors’ Reply to Discussion of ‘‘On the Refinement Mechanism of Silicon in Al-Si-Cu-Zn Alloy with Addition of Bismuth’’

   • Saeed Farahany
   • Ali Ourdjini
   • Mohd Hasbullah Idris

   Authors’ Reply 19 August 2014 Pages: 5306 - 5307

8. Nucleants of Eutectic Silicon in Al-Si Hypoeutectic Alloys: β-(Al, Fe, Si) or AlP Phase

   • Song-Mao Liang
   • Rainer Schmid-Fetzer

   Communication 05 September 2014 Pages: 5308 - 5312

   

9. Processing of Bimodal Grain-Sized Ultrafine-Grained Dual Phase Microalloyed V-Nb Steel with 1370 MPa Strength and 16 pct Uniform Elongation Through Warm Rolling and Intercritical Annealing

   • M. Papa Rao
   • V. Subramanya Sarma
   • S. Sankaran

   Communication 19 August 2014 Pages: 5313 - 5317

   

10. Effects of Friction Stir Processing Parameters and In Situ Passes on Microstructure and Tensile Properties of Al-Si-Mg Casting

    • G. R. Cui
    • D. R. Ni
    • S. X. Li

    OriginalPaper 14 August 2014 Pages: 5318 - 5331

    

11. Microstructural Stability and Hot Deformation of γ–γ′–δ Ni-Base Superalloys

    • Martin Detrois
    • Randolph C. Helmink
    • Sammy Tin

    OriginalPaper 14 August 2014 Pages: 5332 - 5343

    

12. Microstructures and Tensile Properties of Hot-Extruded Al Matrix Composites Containing Different Amounts of Al₄Sr

    • K. Sharifian
    • M. Emamy
    • S. E. Vaziri Yeganeh

    OriginalPaper 15 August 2014 Pages: 5344 - 5350

    

13. Superledge Model for Interphase Precipitation During Austenite-to-Ferrite Transformation

    • Meng-Yang Chen
    • Mohamed Gouné
    • Jer-Ren Yang

    OriginalPaper 07 August 2014 Pages: 5351 - 5361

    

14. High-Temperature Oxidation and Oxide Scale Formation in Plasma-Sprayed CoNiCrAlYRe Coatings

    • Giovanni Di Girolamo
    • Alida Brentari
    • Emanuele Serra

    OriginalPaper 14 August 2014 Pages: 5362 - 5370

    

15. A Numerical Model Describing Multiphase Binary Diffusion in Liquid Metal/Solid Metal Couples

    • Shinji Tsuji

    OriginalPaper 26 August 2014 Pages: 5371 - 5378

    

16. Deformation Mapping and the Role of Carbides on the Microstructure and Properties of Evolved Adiabatic Shear Bands

    • Solomon Boakye-Yiadom
    • Abdul Khaliq Khan
    • Nabil Bassim

    OriginalPaper 14 August 2014 Pages: 5379 - 5396

    

17. Direct Observation on the Evolution of Shear Banding and Buckling in Tungsten Fiber Reinforced Zr-Based Bulk Metallic Glass Composite

    • J. H. Chen
    • Y. Chen
    • L. H. Dai

    OriginalPaper 07 August 2014 Pages: 5397 - 5408

    

18. An Assessment of Milling Time on the Structure and Properties of a Nanostructured Ferritic Alloy (NFA)

    • Richard DiDomizio
    • Shenyan Huang
    • Mike Larsen

    OriginalPaper 27 August 2014 Pages: 5409 - 5418

    

19. Effects of Mn Addition on Tensile and Charpy Impact Properties in Austenitic Fe-Mn-C-Al-Based Steels for Cryogenic Applications

    • Junghoon Lee
    • Seok Su Sohn
    • Sunghak Lee

    OriginalPaper 19 August 2014 Pages: 5419 - 5430

    

20. A Re-examination of the Portevin-Le Chatelier Effect in Alloy 718 in Connection with Oxidation-Assisted Intergranular Cracking

    • Bertrand Max
    • Bernard Viguier
    • Jean Marc Cloue

    OriginalPaper 14 August 2014 Pages: 5431 - 5441

    

21. Analysis of Strain Rate Sensitivity of Ultrafine-Grained AA1050 by Stress Relaxation Test

    • Mohammad Sadegh Mohebbi
    • Abbas Akbarzadeh
    • Shae-Kwang Kim

    OriginalPaper 29 August 2014 Pages: 5442 - 5450

    

22. Reciprocating Sliding Wear Behavior of Newly Developed Bainitic Steels

    • S. Sharma
    • S. Sangal
    • K. Mondal

    OriginalPaper 20 August 2014 Pages: 5451 - 5468

    

23. Effect of Mn Addition on Microstructural Modification and Cracking Behavior of Ferritic Light-Weight Steels

    • Seok Su Sohn
    • Byeong-Joo Lee
    • Jai-Hyun Kwak

    OriginalPaper 14 August 2014 Pages: 5469 - 5485

    

24. The Effects of Microstructure Heterogeneities and Casting Defects on the Mechanical Properties of High-Pressure Die-Cast AlSi9Cu3(Fe) Alloys

    • Giulio Timelli
    • Alberto Fabrizi

    OriginalPaper 15 August 2014 Pages: 5486 - 5498

    

25. Role of Alloying Elements in the Mechanical Behaviors of An Mg-Zn-Zr-Er Alloy

    • Jing Zhang
    • Min Liu
    • Guobao Liu

    OriginalPaper 22 August 2014 Pages: 5499 - 5507

    

26. An Analytical Model for Solute Segregation at Liquid Metal/Solid Substrate Interface

    • Hua Men
    • Zhongyun Fan

    OriginalPaper 20 August 2014 Pages: 5508 - 5516

    

27. Bulk and Surface Properties of Liquid Al-Li and Li-Zn Alloys

    • Marcela Trybula
    • Tomasz Gancarz
    • Alain Pasturel

    OriginalPaper Open access 29 August 2014 Pages: 5517 - 5530

    

28. Microstructural Characterization of Internal Welding Defects and Their Effect on the Tensile Behavior of FSW Joints of AA2198 Al-Cu-Li Alloy

    • Thomas Le Jolu
    • Thilo F. Morgeneyer
    • Anne-Françoise Gourgues-Lorenzon

    OriginalPaper 06 September 2014 Pages: 5531 - 5544

    

29. Inertia Friction Welding of Dissimilar Superalloys Mar-M247 and LSHR

    • Oleg N. Senkov
    • David W. Mahaffey
    • Christopher Woodward

    OriginalPaper 19 August 2014 Pages: 5545 - 5561

    

30. Laser Quenching of Ionic Nitrided Steel: Effect of Process Parameters on Microstructure and Optimization

    • E. Colombini
    • R. Sola
    • G. Poli

    OriginalPaper 06 August 2014 Pages: 5562 - 5573

    

31. Durability to Electromigration of an Annealing-Twinned Ag-4Pd Alloy Wire Under Current Stressing

    • Tung-Han Chuang
    • Hsin-Jung Lin
    • Hsing-Hua Tsai

    OriginalPaper 29 August 2014 Pages: 5574 - 5583

    

32. Effect of Multi-Scale Thermoelectric Magnetic Convection on Solidification Microstructure in Directionally Solidified Al-Si Alloys Under a Transverse Magnetic Field

    • Xi Li
    • Dafan Du
    • Rene Moreau

    OriginalPaper 15 August 2014 Pages: 5584 - 5600

    

33. The Effect of Carbon on the Transition from Graphite to Cementite Eutectic in Cast Iron

    • Edward Fraś
    • M. Górny
    • Hugo F. Lopez

    OriginalPaper 04 September 2014 Pages: 5601 - 5612

    

34. In Situ Observation of Deformation in Semi-solid Fe-C Alloys at High Shear Rate

    • Tomoya Nagira
    • Shugo Morita
    • Yoshio Suzuki

    OriginalPaper 14 August 2014 Pages: 5613 - 5623

    

35. A Novel Mo and Nb Microalloyed Medium Mn TRIP Steel with Maximal Ultimate Strength and Moderate Ductility

    • Minghui Cai
    • Zhun Li
    • Peter D. Hodgson

    OriginalPaper 08 August 2014 Pages: 5624 - 5634

    

36. Grain Growth Behavior and Hall–Petch Strengthening in Friction Stir Processed Al 5059

    • Hossein Izadi
    • Rolf Sandstrom
    • Adrian P. Gerlich

    OriginalPaper 14 August 2014 Pages: 5635 - 5644

    

37. Effect of Strain Rate on the Dynamic Recrystallization Behavior in a Nitrogen-Enhanced 316L(N)

    • Sumantra Mandal
    • M. Jayalakshmi
    • V. Subramanya Sarma

    OriginalPaper 06 August 2014 Pages: 5645 - 5656

    

38. Induction Hardening vs Conventional Hardening of a Heat Treatable Steel

    • Stephanie Sackl
    • Harald Leitner
    • Sophie Primig

    OriginalPaper 26 August 2014 Pages: 5657 - 5666

    

39. Al-TiC Composites Fabricated by a Thermally Activated Reaction Process in an Al Melt Using Al-Ti-C-CuO Powder Mixtures. Part I: Microstructural Evolution and Reaction Mechanism

    • Young-Hee Cho
    • Jung-Moo Lee
    • Su-Hyeon Kim

    OriginalPaper 14 August 2014 Pages: 5667 - 5678

    

40. Three-Dimensional Characterization of SiC Particle-Reinforced Al Composites Using Serial Sectioning Tomography and Thermo-mechanical Finite Element Simulation

    • Jai Myun Jung
    • Ji Hoon Yoo
    • Hyoung Seop Kim

    OriginalPaper 20 August 2014 Pages: 5679 - 5690

    

41. Self-propagation Combustion Behavior with Varying Al/Ni Ratios in Compression-Bonded Ni-sputtered Al Foil Multilayers

    • Seoung Woo Kuk
    • Ho Jin Ryu
    • Jin Yu

    OriginalPaper 14 August 2014 Pages: 5691 - 5698

    

42. Effect of Temperature on Stress Oxidation Behaviors of 2D C/SiC-BC _x Composite in Wet Oxygen Atmosphere

    • Yongsheng Liu
    • Litong Zhang
    • Wenbing Yang

    OriginalPaper 14 August 2014 Pages: 5699 - 5707

    

43. Pulse Reverse Electrodeposition of Cu-SiC Nanocomposite Coating: Effects of Surfactants and Deposition Parameters

    • Ajaya Kumar Pradhan
    • Siddhartha Das

    OriginalPaper 15 August 2014 Pages: 5708 - 5720

    

44. Analysis of the Deformation Behavior of Magnesium-Rare Earth Alloys Mg-2 pct Mn-1 pct Rare Earth and Mg-5 pct Y-4 pct Rare Earth by In Situ Energy-Dispersive X-ray Synchrotron Diffraction and Elasto-Plastic Self-Consistent Modeling

    • Martin Lentz
    • Manuela Klaus
    • Bjørn Clausen

    OriginalPaper 04 September 2014 Pages: 5721 - 5735

    

45. Mechanical Property and Intergranular Corrosion Sensitivity of Zn-Free and Zn-Microalloyed Al-2.7Cu-1.7Li-0.3Mg Alloys

    • Jin-feng Li
    • Long Xu
    • Zi-qiao Zheng

    OriginalPaper 04 September 2014 Pages: 5736 - 5748

    

46. Effects of Interfacial Lattice Mismatching on Wetting of Ni-Plated Steel by Magnesium

    • Ali M. Nasiri
    • Mok Y. Lee
    • Y. Zhou

    OriginalPaper 26 August 2014 Pages: 5749 - 5766

    

47. Mechanical Strength and Failure Characteristics of Cast Mg-9 pctAl-1 pctZn Alloys Produced by a Heated-Mold Continuous Casting Process: Tensile Properties

    • Mitsuhiro Okayasu
    • Shuhei Takeuchi
    • Hiroaki Ohfuji

    OriginalPaper 14 August 2014 Pages: 5767 - 5776

    

48. Clustering and Vacancy Behavior in High- and Low-Solute Al-Mg-Si Alloys

    • Sigurd Wenner
    • Katsuhiko Nishimura
    • Randi Holmestad

    OriginalPaper 26 August 2014 Pages: 5777 - 5781

    

49. Thixoforming of A356/SiC and A356/TiB₂ Nanocomposites Fabricated by a Combination of Green Compact Nanoparticle Incorporation and Ultrasonic Treatment of the Melted Compact

    • Sinan Kandemir
    • Helen V. Atkinson
    • Sarah V. Hainsworth

    OriginalPaper 14 August 2014 Pages: 5782 - 5798

    

50. Role of Nanostructure in Electrochemical Corrosion and High Temperature Oxidation: A Review

    • B. V. Mahesh
    • R. K. Singh Raman

    ReviewPaper 23 July 2014 Pages: 5799 - 5822